SHOWOFFR32

Sent you a PM @Chelll

I’ve got a couple GTRs here in Ipswich. I should be able to help you out 🍻

Well done mate! post up some photos of the install!

Thanks for the update mate! Watching intently at your progress 😅

Wow I see what you mean!? I’m keen to see the photo with the IC7 mounted! Sorry to hear you’ve had a poor experience with them.

Wow that’s terrible news, so many people I know have told me about these mounts so you’d think they’d be okay quality by now? Mind posting a photo of the one you received?

I’m using the Link G4X plug in.. I’ll need a way to get the signal into the ecu. I had a look at the Haltech fuel signal conditioner and will most likely buy one for mine also.

Aaahhh don’t tell me that!! I JUST ordered a Mako Motorsport fascia also.. ? I did send them an email asking if I could drill my own holes on Saturday afternoon and get a email back saying “Sure, well update your order” on the Saturday night!? I wonder why they won’t reply to you? Fuel level signal conditioner? I’ve never heard of that before, I’ll do some research and see if it’ll help with my install too possibly. Ive been made aware that the ecu gets its speed signal, some central locking stuff, rear de mister and possibly something abs related all come from the original cluster also, so a work around for all these is most likely required. Someone gave me the idea to use the original circuit board (they’re pretty thin) in behind the Mako Motorsport dash piece. I’ve optioned for the recessed IC7 so they’re may not be much room left behind mine after install.. Attached are the electrical diagrams for the gauge cluster and the central locking stuff ??

I’m just about to try the same thing in my R34 GTR.. Please let me know how you go if you get to it before I do, if I mange to sort it before this page is updated, I’ll put my workings up here ??

So guys, problem solved!! Turned out to be a bung fuel pump.. Put a R34 GTR Vspec fuel pump in I had laying around and a adjustable fuel regulate and she fired straight up. I also cleaned the AAC valve while it was apart and now is idling much smoother.

So all wiring is fine and it starts when i spray contact cleaner in the intake.. Turns out its a fueling issue, insure what yet. Pump is fine and I'm getting good pressure at the rail, also the case fires the injectors and pump when required?? Any thoughts?

Yeah thanks mate I'll have a look see if its been rubbed

R33 S1 popped and banged mid drift, now won't start. G'day Guys, Been around a while and have had plenty of skylines over the years. I have 3 at the moment lol This is about my R33 GTST S1.. Last Friday night I was at QR for drift practice and all was going sweet. Spent about an hour in the seat (Temps good and oil pressure good). Suddenly mid drift the car started popping and banging and started loosing power. It didn't shut off instantly but slowly lost power until it would not register any throttle input and would only idle very very roughly at about 600-700rpm. Soon it died and overtime I went to fire it back up it would run rough for a second or two and die. Since I have changed spark plugs, cleaned AFM, put in fresh fuel, changed fuel filter, checked coils for spark, checked ignitor, checked all fuses. It wasn't blowing any smoke and or using any coolent. No it won't fire at all. Its running a S1 RB25det, APEXI power fc ecu however it didn't come with a hand controller, k&n pod, bigger in tank fuel pump, hi flowed turbo, exhaust etc. Once I changed the fuel filter and plugs I tried cranking for 10sec or so and re pulled a spark plug, however it was bone dry and so was the cylinder. I am getting good fuel pressure to the fuel rail but the injectors aren't spraying for some reason. I removed the CAS and spun it by hand and could hear the fuel pump prime and the injectors click, however only one click per 120 degrees? Im assuming due to 2 cylinders firing at a time. So it can't be a CAS. I know injectors can fail, but all at once seems a bit coincidental? It was running well all night until it stopped and its only been a few days since. Any thoughts would be greatly appreciated

I need this!! Message me man!

Just got the initial draft for the write up in Performance Imports, looks good

This is true, however, it will be tuned by chea from powertune in January, so if you want to wait till then, it will be well and truly proven.. Plus I just got the write up for performance imports from Jason, so the feature is getting closer..

..

$70,000 Ono

Bump it up

Up

Thanks mate, had a few more offers... No one following through with the money though.

^^^^ If people want to fly up to Darwin for a test drive then I'll be more then happy.. But not without proof of finance for it, I won't let just anyone drive it..

$75,000 Ono..

Yeah I agree ^^^ However I do NOT trust anyone in Darwin to tube it as they're not very good at all. I am waiting to bring a tuner up from down south to tune it.. Then it will be sold tuned..

Bump