Thanx , it is weird car warm and starts fine idle fine. I changed spark olugs, coils are new, fuel filter,checked afm,new collant sensor but i did not try bleeding coolant , will see how i go . I hope it fixes it
Have a bit of issue with my cold start.
It starts low revs turns off , next start fires up fine.
This only happen when its cold, i cleaned aac valve and check for air leaks.
If i disconnect aac all together , brown and purple plug makes no diff to start.
Any ideas , could aac valve be gone?
are coilovers are 2 way adjustable yes , its safe to remove helper as the main spring will always be captive.
obviously after removing them adjust main spring according.
I have greedy return flow fmic in exelent condition. Was on car for 3 months. No bend fins.Comes with all clamps and silicone hoses.
$550
Anymore info pm me
hey guys got a set of hsd hs coilovers for r33 gtst
all in good condition except slight knock in right had side rear on very cold mornings , otherwise once it warms up knock is gone.
it only happens when its very cold .
im after $550
located in liverpool
i have htc desire for sale .
unwanted gift i used it for a week and i dont like android.
its basically new ,12 mnths local warranty
have original box , charger ,handfree,plus leather case htc genuine and 4gb sandisk micro sd
runs android 2.2
$400 delivered anywhere in aus
pickup also available from Liverpool
as per topic i need a working aac valve for s1 r33
it has to be 100% functional as atm i have 2 that are as bad as original one , so only if you know it works 100% please reply
thank you
few bits i need to get rid of
1 x UAS MASTER CYLINDER STOPPER $50
1x stock rear discs , heaps of meat $30
1 x rear seat s1 very good condition $30
1 x 20pce red tuner wheel nuts $25 brand new
can post everything but rear discs as they are heavy
located in sydney
tested it this morning and its better but not 100%
when its been left overnight and car fully cools off the revs are low on startup then i touch acc pedal they go up to 1.5k until its warmed up they drop down and runs fine after that
every hot start is perfectly fine and idles great
anything else to look at?
did you guys just screw it in like that or used some silicone on top.
when i took mine off it seemed there was some sort of oring or silicone ( was too hard and broke into pieces) once i removed it