bubbabooga

Just finished installing my race series balancer and trigger kit. After Initial fitment I ran a straight edge from balancer to power steering pulley and found the power steering pulley around 2mm out of square and alignment. This is using rb30 block, crank and power steering pump and bracket with an rb30 spec balancer. Some massaging of the pump mounts with a flappy disc and a die grinder had it lined up perfectly. Just word for thought I would always recommended double checking belt/pulley alignment to save future hassles.

Just finished installing my race series balancer and trigger kit. After Initial fitment I ran a straight edge from balancer to power steering pulley and found the power steering pulley around 2mm out of square and alignment. This is using rb30 block, crank and power steering pump and bracket with an rb30 spec balancer. Some massaging of the pump mounts with a flappy disc and a die grinder had it lined up perfectly. Just word for thought I would always recommended double checking belt/pulley alignment to save future hassles.

Near new condition uras copy complete cefiro kit, includes front bar, rear bar and side skirts. Front bar has a few tiny cracks in the paint and scuffs on the underside of it. All painted in pearl white. Had it sitting in the shed for years, never goona use it so it has to go. Make an offer $550ono Text Tom on 0423420713 Cheers

Selling my near new haltech e11v2 Ecu and rb patch loom so it's direct plug in. $700ono Literally would have ran for not even 10 hours in total since buying it brand new through a group buy. Selling as upgraded to a link G4 Text Tom on 0423420713 for questions pics etc Cheers

Price drop 160ono for loom including splitfire looms

As titles states Been run less than 10hrs Brand new condition genuine Nissan a31/hr31 coilpack loom with the splitfire adapter looms. Ditch the dreaded rb misfire issues once and for all. 160ono Cheers

Full set of rb26 440cc injectors and Gtr dropping resistor pack. Injectors will need a clean and new plastic pintle caps. Sweet upgrade for rb20's 220ono Text Tom on 0423420713 Cheers

No sorry il be keeping those. Cheers

Haltech e11v2 ecu and rb patch loom Purchased threw the group buy on sau years ago, car has basically sat in the shed since. In as new condition. Can post no worrys. $650ono Text Tom on 0423420713 for any questions or pics. Cheers

Brand new genuine Nissan cefiro coilpack loom Located an hour out of Adelaide south Aus. Happy to post. $220ono Can also include the splitfire adapter loom to suit this loom to splitfire coilpack a for another $80. Also have square plug cefiro CAS in good working condition for $140ono Working cefiro square plug igniter $100ono Text Tom on 0423420713 for any pics or questions. Cheers

Sold cheers mate

Hey mate Happen to have r32 GTR throttle cable and bracket that sits on plenum? Cheers

Awesome setup Had exactly the same on my rb25/30 non VCT with shitty na cams. Pulled 326rwkw on 17psi. Good luck with the sale!!

Sold. Cheers!

Cheers warlord! Pending payment

Price drop $2900ono

Never mind. Gave up on the search and went with steel hks gaskets. Cheers anyways

Sorry about that mate, inbox should be all good now. Cheers

Been holding onto this for awhile as I couldn't bring myself to sell it off knowing il probably never see one again. Anyways Garrett gt3076r .063 ceramic coated ex housing, surge ported comp housing. As new condition, bearings are smooth and silent and zero endplay. Cast iron twin scroll hks low mount manifold to suit rb20/25, ceramic coated chrome. Matching hks 38mm external wastegate which I believe has 14psi springs in it. 3 inch dump pipe running to cat and a 1 inch screamer pipe setup also. Also have brand new in the bag fitting kit from gcg which includes turbo to manifold and turbo to dump pipe gaskets. Also have a billet oil drain fitting and length of oil drain hose all brand new still with gaskets. Also have the block water and oil adapter fittings. And a silicone 4inch to 3inch reducer, a straight 4 inch silicone hose and a turbo outlet reducer hose all in black, brand new. Pieced it all together to make the most of a standard internals rb25 but I can't see myself making use of it any time soon so il let Somone else enjoy it. I'm aware of how rare and sought after these cast iron low mount manifolds are so Wanting $3100ono for everything listed above. Located an hour out of Adelaide and can post at buyers expense. Can text Tom on 0423420713 for more pics or details. -Also worth noting the dump pipe was made for my rb25/30 in cefiro, so due to the added block height of the rb30 you may get away with it fitting up fine but possibly would only need cutting shortening by 38mm.

Their had been a few posts from status where he logged some definite temp reductions using them. Any idea on a company name still making them? I had found a aus company called Mace engineering but it seems they only make them for rb25's.

Yeah iv tried direct threw the gizmo site and a few others which listed the gizmo part only to have them all bounce with a reply email saying they no longer stock them. I read a few posts from forum member STATUS about his use with them etc and have tried pm'ing on here but am not allowed for some reason? Cheers

Hi guys Just finishing off my rb26/30 build and have read good things of these thermal intake manifold gaskets. Any one have any input, advice or experience using them? I'm having a lot of trouble finding a stockist, iv contacted gizmo who used to make them but have since seized manufacturing due to low demand. Anyone have any idea where to locate them at all? For the single head to intake manifold gasket. Already have the 6 steel throttle body gaskets sorted. Any help appreciated. Cheers Tom

Also forgot to mention Turbo is T3 single scroll external gate. 56T spec. Cheers

Yeah mate ball bearing, t3 single scroll in 56t spec. Cheers

Up she goes Still available