VLTWagz

WTB: Sydney: RB25 Harmonic Balancer Call/PM Mark 0411683237

Will you separate the harmonic balancer? How much? Mark 0411683237

Like this? http://www.nolathane.com.au/product_detail.php?part_number=41089&sans_vehicle=1

SOLD

bump

bump still needed

Selling 6x Reconditioned Bosch Indy White 1600cc Injectors. The replacement for indy blues. Cleaned, flow tested, new seals and O-rings. Suit 14mm fuel rail. Low impedance. $350 with FREE postage Oz-wide. PM if interested. EDIT: Added info, PRICE DROP and bump.

Top feed. Suit 14mm fuel rail. They aren't used on any cars from factory is Australia to my knowledge. People commonly use injectors this size when switching to E85.

Selling 6x Reconditioned Bosch Indy White 1600cc Injectors. $400 with FREE postage Oz-wide. PM if interested.

After the standard 4-bolt oil filter mount from the block of an RB20, with bolts if available. Mark 0411683237 or PM here.

There's a few threads around on changing studs. It's easy as long as you have a mallet and know how to disassemble/reassemble the handbrake shoes.

anybody?

Just for interests sake here's a pic of the UAS braided line next to the standard line and cooler from R32 GTR.

So we recently bought a R32 GTR that at some point has been in a front ender and has had an obvious rad support bar change. We assume that at this time the car lost all it's other bits in this area as the power steer cooler and horns are also missing. I've bought another horn and was hoping to use the factory plug but cannot find it! There are a few plugs floating around the front of the car but none come up +ve with the test light when pushing the horn. Fuse and relay tested and working fine. Could someone please photograph or at least describe where the plug/s comes out of the harness and what color the plug and wires are. Thanks in advance.

Not since I've had it, I think it's just the suns reflection.

Well it's to face the music. I have too many toys and one must go. http://www.carsales.com.au/all-cars/privat....aspx?R=9026735

Sold to me!

Done this today on my red top ECCS RB20DET, fixed it perfect! It was full of gunk, there were parts in there that I didn't even know were supposed to move until I cleaned them and freed them up. Couldn't find where anyone else had posted it but for the RB20DET I used gasket 23785-42L10 at a cost of $7.25 from Lander Parts in Prospect, Sydney.

I know this is an old thread but my car has pretty much the EXACT same symptoms: http://www.skylinesaustralia.com/forums/Rb...pm-t315539.html Did you find out what the cause was?

Hi all, I've got a red top ECCS RB20DET in an R31 that I just bought. It's running 10psi with standard turbo, R33 guard mount cooler, standard computer. It seems to drive fine up to 5000rpm, then the sound of the motor changes and it gets really sluggish revving past that up to about 6500. From 6500 to 7000 it seems to clear out and haul ass again. It idles fine and I'm not sure how to explain this but say you rev it in neutral from idle, it takes like a second from when the throttle opens before the motor revs up. I thought it must be fuel or air. I have changed the plugs, new fuel pump, checked the base pressure on the aftermarket reg, set to 44psi. I can't find any leaks in the cooler or piping. Any ideas?

So does it come with manifolds, injectors and turbo?

Looking to upgrade my RB20 turbo. After a R33/34 RB25 Standard Turbo with 45v(1,2,3 or 4) on the compressor housing. Prefer steel over nylon compressor wheel, in ready to bolt on conditon. Not really wanting one posted, would prefer to inspect before purchase. Thanks, Mark. PM or reply here.

Seriously I wouldn't be bothered with chopping and welding. Just buy these they're well priced and made to fit.

Yeah yeah I know man, check the first post this is an OLD thread from before I got extractors.

Cheapest I found new were HiTech Headers part# HTH065, $340 from bestmufflers.com in Sydney. What city are you in? They occasionally pop up on eBay from $50.