34GeeTeeTee

The boost was then turned up to its high setting on 25psi (Tapers off to about 22-23psi in the top end) and the results - The car was super consistent and ran the same numbers within 1hp over and over even with all the heat in the engine bay from running for ages... Not bad

Once some adjustments were made the car was run up on low boost, it sounded smooth and tough as nails.... With 20psi dialed in -

After this was replaced Adam chucked it on the dyno for me to double check it and see if the problem was solved, it certainly was for now! With E81 reading in the tank it was run up to see how it behaved -

So after an awesome morning i got in contact with Mr DVS JEZ and was planning on getting up for an arvo run, we went off to fetch some E85 from United for the run and as a surprise i had an Ign Breakdown problem, this is the first time the car has ever had an issue with Ign apart from the original coilpack failure years ago.... This caused some concern and was also going to prevent any power runs.... Lunchtime had passed and the arvo runs at JEZ's were looking less likely... At this stage being the arvo i was worried and a bit dissapointed with the car, of course Adam Neish being the brilliant tuner he is decided to come to the rescue! The coilpacks were checked and all seemed to be in good condition, the plugs were removed and checked but nothing majorly wrong, we replaced them anyway!

So anyway, i have a farkload to update apart from seats and it will take me the next couple of weeks i think.... To start off, i had the beast booked in early Saturday morning with our man DVS JEZ just for a power run to check how it behaved on United E85 and also to check the coolant temp reading as my gauge was being a dick... Fast forward to the end of last week and i got a call asking to chuck the car in for some photos in Sydney which i thought would be a good thing so i changed the booking to the arvo and shot off down to Sydney for the morning.... Photos were for JEM and were done the the guys at THE-LOWDOWN.COM, the guys seemed great and it was a good opportunity to catch up with the guys, here are a few pics off my phone but will have heaps more soon off Carmens camera -

So much carbon!!!!!

I assume these slide up the length of the trailer and just slide out into position? I saw a dodgy pic in your thread but didn't show too much... Needs moar pics

Uh huh!!! Well it says on there that the 34 is different so maybe that is the answer we were looking for i guess?

Yeah so much shit talk in this thread lol.... I really should get it and clean it all up one day but that is time better spent thrashing the car Correct you are - I dont think i have any pics from underneath and now with the new setup and the 86 fuel lines in the boot i have no intention of pulling it apart WTF is a jet pump?

Yeah i need to sit lower in the car actually! Helmet touches the roof Ummm i dunno man, black stuff I dont know the difference between materials lol Certainly got a lot more holding ability then the stock worn out GTT seats. Will be interesting to see how they go once fitted!

Yeah yeah i see you DIY everything, i just wanna bolt the kent in and thrash Awesome ill go have a look man! Asshole Haha I got home Friday and found Carmen had already picked them up and had them waiting for me, best girl ever!!!

Yeah well boot space now belongs to fuel pump city and rear seats are soon to be filled with Monkey Bars....

Mine seems to be pretty accurate and very responsive!

Anybody else around there that can do it for you? Surely its not that hard to get a dyno run...?

Ill check with Dad as he is due for another car, although i think he had a bad run with BMW's in the past!

Good stuff! Appreciate it, its only an idea at this stage but if you can get that sorted it will make life much easier Something along these lines but just an outline -

Sext me up! 0434 353 29 Twwwwwwwwoooooooooooooooooooooooo!

Hmmmm i do need to learn how to do the above! Will look into it more soon Might try get it sorted before our SMSP Track Day!

Be interesting too see just how different they are. If you can, post a pic of the mounting points and ill compare to the car to see if there is any similarity?

Sorry, just saw the reply... I just want an outline of a 34GTR or something similar to reflect our car scene.... The idea is to create a folding business card from the design

Lololol fkn Kurtis..... Ill slap him for selling you the rails and not selling em to me Not sure, what are the ones you have?

Pain in the ass Yeah 34 floor pan is different! They didnt want to make it easy on us! Plus the 33 needs to be watertight for the ocean

Oh shit really? What model rails did you go with? Any advice will be handy You still run them in the car? If so, pics?