Jump to content
SAU Community

Rucker_

Members
  • Posts

    10
  • Joined

  • Last visited

  • Feedback

    0%

Everything posted by Rucker_

  1. Cheers guy car is fixed. Was that tiny f**k off hose going to the inlet.
  2. Thanks mate! will give it a shot for sure.
  3. Thanks mate, did you replace it yourself or is it abit of a bitch?
  4. Hey guys, needing some advice on a leak i've got at the moment on my 32. I noticed it yesterday when i saw coolant running along my driveway, its not leaking alot but enough. Fairly sure its only leaking while the engine is on. It is coming from the back of the engine bay somewhere behind the motor, and running down onto the passenger side of my gearbox. I have pulled off the two heater hoses behind the engine to check them properly and replaced clamps even though they were all fine. Now im stuck, its obviously got to be something lower than those hoses, is there any more hoses etc underneath those i should look for as its nearly impossible to get down there. Any help would be great, Cheers Steve
  5. Well.. Last night i was driving the 32 home from a housewarming party, when i got home and parked the car up i could hear a rediculously loud bubbling sound, popped the hood and could see that top left corner (same side as overflow) has tiny tiny bits of clear smoke coming out, smelt like burnt coolant. I always check the temp guages whilst driving and the highest it went on the way home was 100deg when i was opening her up abit. Checked under car and couldnt see any signs of leaking coolant. I let the boiling stop and topped up the radiator (needed about 1L of fluid), overflow was still full.. Then started the car back up and it started leaking from what i could see the bottem left had corner of the radiator. Ended up getting it towed home and checked it over today, couldnt really see much so topped it up again, needed f**k all this time and today its not leaking. Drove the car around for awile till it warmed up and then when i got home the boiling was back. Still not leaking again though. I have no idea whats going on now. Any ideas? Cheers, Steve.
  6. should be a screw on the top. just tweak with it a little.
  7. ill see yous there niggar in the fc rx7 niggar 600 rw hp niggar but yer niggar peace out niggar
  8. Hey guys i own a gtst r32 and im just curious as to what would be the best vacuum line to tee an aftermarket boost guage off. Pictures would be great if you could get some.. Cheers. Steve
×
×
  • Create New...