JAK355

Found the problem, Tried new pads, at first if appeared fine but only worked till the bed in material had worn off. Another set of rotors and a machine when i was in Brisbane. Lathe must have had slight "run out' or an incorrect dye was used, which caused the issue. Thanks for the advise.

Old pads, but they where Milled to a true surface as they had 9mm of pad left .

Its only when brakes are applied, spins free any other time

I even took everything off again to check. Its giving me a headache

I just machined my r33 gtst rotors and now the front end is clucking under brakes. I dont think i pushed the calliper pistons in at all or if much. It only happens under braking, even under light braking. I removed the ABS fuse and it still does it. I need urgent help. PLEASE Jake

R33 Underdash, Aircon evaporator Wanted. only the evaporator(looks like the original intercoolers) bit needed. Phone 0427322636 or PM Cheers Jake

R33 Underdash, Aircon evaporator Wanted. only the evaporator(looks like the original intercoolers) bit needed. Phone 0427322636 or PM Cheers Jake