Jump to content
SAU Community

VLRB20DET

Members
  • Posts

    100
  • Joined

  • Last visited

  • Feedback

    0%

Everything posted by VLRB20DET

  1. i was listening to the BBC on short wave radio and apparently over in Brazil the minimum ethanol in there fuel is 10% and they have been running this for some time!
  2. Im looking at 240rwkw for street/drag racing cant afford custom made gear mate
  3. Ok im goin to rebuild my RB20DET cos ive started to get blow by cos of the stock rings not coping well with 190rwkw and abit of drag racing anyway whats the best forged pistons and rings should i use ?? Ive heard people say this and that about aires, wiseco etc and total seal and N1 rings but as ive never rebuilt an engine before i dont know what i should buy also if anyone know where they can get good forgies cheap in victoria send me a PM
  4. Yes comes with actuator but it requires a dump pipe as I used it on my new turbo You can get them cheap from EBAY in split pulse type
  5. I have a RB20 Turbocharger, in excelent condition, no shaft play, never overboosted, Comes with Actuator Turbo needs Dump pipe (these are available from ebay) Selling due to a turbo upgrade i'll also throw in oil/water lines to suit RB20 S180ono, will COD anywhere PM me or email/msn me at [email protected]
  6. Anyone know if a VL Turbo JATCO (automatic) will fit up behind a RB20DET?
  7. Braune SuperTune Dyno Day Date Saturday November 12th Time 9:30am till 5:30pm Where Braune SuperTune Portland (Map coming soon) Cost $40 includes 2 runs Classes # N/A - 4+Rotary, 6 and 8 Cyl # Forced Induction - 4+Rotary, 6 and 8 Cyl On the Day On Day sign up will be placed at random through the day. Pre-registed Drivers will have preference in the list Requirements :- - Street Tyres (No Slicks) - Roadwothy car (i.e - car cant be just out of the paddock ) - Oil and water to be checked - All belts secure Registration REGO DETAILS - To Pre-Register for the day: 1. PM VLRB20DET (me) 2. Speak to me personaly: MSN with the below addy 3. Email me - [email protected] if you have friends that wish to join in - you can just tell me there details and i'll add them NEEDED Infomation for rego: # Name # Contact Number (optional) # Car Model # Engine Type (Just ltr and Cyls - not a full write up!) ------------------------------ There will be a BBQ and drinks on sale for the day, so come along and see whats going on! Any more infomation, please post in here or PM me!
  8. The new WVCC (Western Victoria Car Club) has organised an open cruise to Halls Gap on the 1st of October, all cars are welcome to come along There will be mini meet points in warrnambool,ballarat,portland and horsham here is a link to the main thread http://wvcruiseclub.com/phpbb/viewtopic.php?t=96
  9. I made 186rwkw the other day at Bresciani Racing Specs Are RB20DET (Silver top) Hybrid copy intercooler RB25 Turbo ( has steel wheel conversion) running 17psi 3" exhaust Pod Filter I maxed the injectors out on the dyno run so for more power I will need GTR injectors, Bosh 044 fuel pump, Microtech LT8
  10. A mate of mine just bought a HKS Speed Limit Defender (SLD Type 1 for Manual Trans?), Does anyone have a english wiring diagram on this unit or know where one can be found as japanese is abit difficult to understand??
  11. im just wondering which of these 2 dump pipes will give you more power - screamer dump pipe or split pulse dump pipe? Im looking at getting either one which works best for my RB25 Turbocharger im using on my RB20DET engine Ive seen heaps of companys selling split pulse pipes on EBAY etc but not many selling screamer pipes, anyone know of any companys that sell screamer pipes?
  12. Yeah im running a R32 Gts-t 5spd and yeah when I come on boost you can hear a high pitch squieling noise from it so id say the bearings are goin to die soon, I will be looking at either a properly built JATCO or a R33 Gts-t 5spd either way im looking at 2500 which ever way I go
  13. I have a RB25 Turbo on mine but it has been rebuilt with steel wheels, im running 17psi atm but should be running 20psi with a dyno tune
  14. What about Nissan Skyline boxes, im mainly interested in peoples responses on the RB20DET/RB25DET 5spd's ??? ---------------------------------------------------------------------- Cubes - Yeah I have heard good/bad stories about using ATF fluid on 5spd's Stagefummer11 - I was told today some ford 5spd's used ATF aswell
  15. Anyone ever heard of people using Automatic Transmission Fluid (ATF) in 5spd manual boxes in skylines, Apparently its supposed to give them better lubriction and quiet the gearbox operation down If anyone has done this or know if it works well please put up a post as I want to hear other peoples responses before doing it to mine
  16. can anyone tell me can the RB20 oil/water lines be used on a RB25 turbo for a upgrade on a RB20
  17. Hows it goin ppl, I just though id put up a post on here to see if anyone is interested in coming on a cruise down the GOR, this has been posted on forums like CT/SC/CCC etc (no offence to ppl that have problems with other clubs) This is an open cruise and should be a good day, so shine up your rides and lets go cruzin Here are the details Melbourne Meet!! First location: kfc on the todd road exit of the west gate fwy, (on your left if heading inbound) Melway ref: 42 H-12 Melbourne!! Meet Time: Meet at 9am sharp and leave at 9:15-9:30am Geelong And Melbourne Congragate: Corio bunnings: leave corio at 11:30 melways ref: 432 F-6 Everyones Meet Point: Lorne Pub (ON great ocean road. can't find a melways Ref. Follow the Crowd..) When you see Lorne, Find the Biggest Carpark on GOR... Leave: When everyones there.. Last Stop: Apollo Bay: just follow Great Ocean Road, it'll take you to Apollo Bay. there, there is a carpark with a view. on your left. (you'll see it..)
  18. Im still using the stock internal wastegate on the stock RB20 ceramic turbo, I was told at Bresciani Dyno Day that it was spiking and I need a aftermarket internal wastgate actuator to make it hold 14psi boost
  19. Put my car on the dyno the other day and it made 147rwkw on 14psi but it was spiking between 9psi and 14psi, the dyno operator said I need a better actuator to make it hold boost on the stock RB20 turbo, What actuator should I use to make it hold 14psi all day long and not spike.. Im not looking at upgrading the turbo either......
  20. yeah I think doing what I did wasnt right, if anyone has some pics of how theirs are setup on either a RB20 or RB25 please post them up so I can get a better understanding of how to install mine
  21. I got myself a new oil catch can , its a sealed item with no breather and 2 hose connections at the bottom, Do i plug off the PCV and just run the 2 hoses from both rocker covers to the catch can ?????
  22. so you guys are saying the RB25DET 5spd is stronger than a VLT MX-7??? Yeah I actually have a VLT tailshaft laying around so Im right there, Anyone know how much approx I will pay for a good RB25DET, 5spd??
  23. Ok I blew my RB20DET 5spd man box at local drags using slicks Whats the best way to get strengh so this wont happen again now im contemplating in either using a RB25DET 5spd as they are supposed to be stronger than the RB20DET unit, Also will my RB20 clutch (exedy HD) be ok to use with the RB25 box?? or is there any auto boxes that are strong that will work, like RB20 or RB25??? I just dont want to go back out again and destroy another gearbox on slicks...
×
×
  • Create New...