teng

I see. Thanks for the info. Great Information.

Hmmm. i don't have a seatbelt warning on dash. Can anyone post a picture on where exactly on the dash is the warning light? Browsed throught the entire Nissan FAST CD and not a single section shows that there is something on the passanger floor. lol

As topic, was removing seat to have them upholstered. Found a plug and something like a breather hole under the passenger seat. The breather hole has an extension and i can remove it out.

I don't like to cut wires lol. I like to see uncut wires and it must look neat

Actually there are two boxes, left and right side. They control the speed of the wipers.

The beeper comes from the power lock system under the dash and it's soldered to the board. Only way to remove it is to desolder the whole beeper off and now it's gone. No more beep. lol Just for info as i was looking for this beeper for the last few months.

Btw if you got the RB26DETT off a Front Cut, the swap would have been much smoother as you can swap everything from the gearbox till wiring with no problems at all.

Search function came out with similar conversions to yours. http://www.skylinesaustralia.com/forums/En...l=RB26DETT+SWAP http://www.skylinesaustralia.com/forums/Rb...l=RB26DETT+SWAP http://www.skylinesaustralia.com/forums/RB...l=RB26DETT+SWAP I don't really have much knowledge on this kind of swap as RB26DETT engines are rare here and they never come complete hence making the swap extremely difficult. When i got my R33 GTS25t it had a blown engine and i did souce out a RB26DETT but the hardware was not complete and the rebuild will take alot of money hence i decided to stick with another RB25DET from a R33 Chasis.

Splitfire Coilpacks and Nismo Fuel Pump

The redtop RB20 is turboed am i right? It's a very rare engine and i don't see it often as they aren't many HR31 here equiped with it. Only Saw only one at a wreckers shop. Looks in bad shape too.

If you still have the stock ecu, you wouldn't need to get a z32/33 afm.

Actually any battery will fit as long as the amps match or close to it. We only have Japanese brand batteries here like yokohama and panasonic which are very good. We also have sealed batteries and i'm thinking of getting one when my battery dies. I dun wanna refill the battery every 6months cause it's not easy to access the battery. Goddam 30min job. lol

BTW May i know what causes a "piston slap". First time i come across a term like this ><

YES! but the wrecker MAY not sell you only the brake light as it would make the spoiler worthless, am i right?

It's the same like a R34 GT-R. Only difference is that you can actually see how much power is moved to the front cause of the MFD ( I think) . GT-R's naturally are RWD and the ECU will deliver power to the front wheels AS AND WHEN NEEDED.

already being covered. use seacrh plz. http://www.skylinesaustralia.com/forums/Re...mp;hl=hicas+R32 I hate the hicas system on a r32, so messy. Luckily i got a R33 [No offense R32 to Owners] Teng has apologized to R32 owners

Being covered, please use the search tool. http://www.skylinesaustralia.com/forums/R3...=Z32+AFM+on+r32

Maybe your throttle is jammed. Pressing the accelerator loosens the throttle so you car works fine for a while.

1. Front hole goes to your fuel rail, back hole goes to the stock boost controller.

Ah! That is right BUT i don't have the 2 hoses that goes to the heater core so the only possibility is that it's bypassed from the engine block side.

You will need to remove the horn fuse from the engine bay fuse box or else everytime you turn the torx, the horn will activate and it will drive you crazy.

R34 GTT is much newer than R33 GT's and i WILL NEVER run anything that is lower than 97 on it. My B13 uses 92 so if you wanna pump something that uses 91 get a B13 or equivalent. No offense here, just that it's such a waste to ruin a nice RB25DET cause of cheap fuel AND On another note, No-one is gonna leave a GTT stock forever

haha silly me, i forgot to put down the part number. From your picture it seems you have a S2 R33. For S1 - 63844-15U00 - Protector Assembly RHS For S2 - 63844-26U00 - Protector Assembly RHS (p/n not available on FAST) Cost me BND150 from my local Nissan Agent. 150.00 BND = 114.444 AUD Brunei Dollars Australia Dollars 1 BND = 0.762958 AUD 1 AUD = 1.31069 BND OR if you want a cheaper alternative, then do this. Go to your local metalsheet shop and fabricate one out of thin sheet metel. Costs will be around BND40 bux. The attachment picture is my car but i didn't like the look so i ditched it afterwards and got a Nissan one. lol

Just get new ones like i did but there is a difference in R33 Series1 and series2. Don't make the same mistake i made and bought a S1 version instead of a S2 >< 1st picture shows my S2 version and why i had to buy a new one. It was so soft already that when driving fast, got slapped by downforce so much it got detached and scrubbed my wheels hence the big hole. 2nd picture shows the S1 version i bought mistakely ><

Will the A/C unit still work with the whole heater unit removed as in the attachment?