Hey guys, am a bit confused what to do here, most of the stuff are back to stock the only thing is my muffler still looking for a stock muffler. I check on vicroad web site and this is what they state; I have not recived a letter from the EPA and i dont have a defect sticker on my windscreen??
How do I clear a Victorian defect notice?
The defect notice will specify what you need to do to clear the defect notice. One of three types of requirement will be stated on the notice:
Self Clearance - You are responsible for repairing defects mentioned in the defect notice and you must sign Section 8 of the Defect Notice once the defects have been repaired. You will also need to forward the "blue" copy of the Defect Notice to VicRoads.
Clearance by VicRoads - You do not need to obtain a Certificate of Roadworthiness. However, you must present the vehicle for inspection to a VicRoads Customer Service Centre to ensure that the defects are rectified and the Defect Notice is removed. No appointment is necessary.
Certificate of Roadworthiness must be obtained - You must present a Certificate of Roadworthiness obtained in respect of the vehicle, dated after the date of issue of the Defect Notice, at a VicRoads office. You must not remove the defect label. If the label is present, the vehicle must be presented at a VicRoads Customer Service Centre for removal. If the label is not present, ie where the windscreen was replaced or where a label was not attached, the vehicle does not have to be presented.
Defect notices issued by the EPA cannot be removed by VicRoads. The defect notice will state where to go to get the defect notice removed.
