victoriaGTR

I'm in Victoria Canada. Anyone want to call them for me haha.

I'm going to be installing a os giken Ts3bw clutch into my r32 gtr. I'm buying it used and think it may be from an rb25. I'm wondering if anyone knows what release sleeve and throw out bearing I will need to use. I can't make sence of os gikens website. Nissan part numbers are what im looking for. Thanks phil.

played with the settings and still having problem....

round 3500-4000 rpm.... thats under settings 2 on datalogit Accelerate Injector(ms) right? you have your tune in .dat ?

so i have been road tuning my r32 GTR with my buddy and it has been going well.. however when i am crusing and mash the pedal i lean out and spudder momentarily then it cleans up and i acclerate... i have to muddle around with the INJ vs TPS settings correct? also anyone who has a tuned Djetro PFC would you be allright with emailing me your tune.... i live in canada and dont trust the local tuner at all.... mods are HKS exhaust manifold HKS dump pipes HKS twin GTRS turbees apexi downpipe intercooler 750cc injectors anyone any tune would be a help! THANK YOU!

ok I will keep in touch. I will see if the owner of the shop that has the dyno will allow this.

so what do I need to start?

Thats the problem. The tuner where im from cannot get to it at the moment. Too buisy because of other builds. any other Base Maps i could use just so it isnt running so rich. my o2 sensors are pinned at idle as far as i know thats not right.

no it wasnt tuned. I had a tuner fool with it for a bit. running on a friends tune from an Ljetro. im just idleing the car around.

hey guys. Im in Canada and im wondering if anyone will email me their PFC D-jetro tune. My mods are. SS exhaust manifold SS dump pipe apexi down pipe 3,5 inche exhaust HKS GT-RS twins turbees intercooler 750 cc injectors timing gears (not tampered with) turbo XS BOVs anything will help if its a djetro tune at least I can compare mine to any of yours. PM me if yah want to help me out.

i have looked at paulr33's site but i can still not find where to put the nipples for the map sensors on the intake. i know they go on cylinder 3 and 4 but does anyone have a picture? full instructions anywhere? even in japanese?

any knowhow on how to contact these guys

i just want to get away form using stock or splitfire coils. and moving the coils into the firewall to reduce heat damage.

Does any one know if you can use 6 MSD blaster style coils in place of the stock coils by modifying the stock coil wire loom. Then using some knarly plug leads. has anyone tried doing this? or something like this other than wasted spark.

thats just what i needed to hear! thanks