chrissyo

At the time mine cost about $1050 including shipping and foreign conversion fee's on my credit card

You dont need classes mate...just read here! I bought my first skyline 6months ago and new nothing...so i asked lots of embarresing questions and read around this forum ALOT. Its not as hard as you'd think and there are heaps of tutorials around And oil change is basically undo this bolt....let drain...replace bolt...add oil here. Its pretty simple stuff

i have aftermarket skirts. they are jun. so 2 screws in each wheel arch the rest is heald on with a liquid sealent like silicon. I had to peel part of it back when i was installing my lambo style doors....its stuck on pretty darn well! Damage looks like snaping the things in half

yeah like craved said. you just need to ensure you open the door far enough out before u lift it up or it can catch on the black trim which runs around the top of the window

Im in hobart. how would it be done so that the top of the skirt is sprayed as well. like under the door(when doors closed)

Im assuming $250 is for new skirts? What would it cost to get a set stripped back and painted? also is it possible to do it with skirts attached? im failing to see how im going to remove mine without damage

im still considering writting up my howto on this. Ive been waiting to take some more pics cause i have to pull it all apart again soon to fine tune the fitting. Not sure but i think my drives side hydraulic strut is starting to wear already For those who are installing these kits you need to be careful when opening doors. Ive managed to rip both my interior door cards.

it looks fairly shagged what ever it is! most likely central locking or alarm related..cant see what else u would have in a door

why would you consider it being something bigger like a clutch or timing belt without first ruling out the obvious problem of your wanktastic blow off valve?(recently converted to stock and will never go back!) Dont be lazy, firstly go through wat was already explained to diagnose where in the BOV setup your problem lies. IF that doesnt work then maybe look outside the square for another problem.

I wasnt after a rough answer though id like to know what i can fit with stock gaurds... wat offset and width in an 18, what offset and width in a 19. not just "you can have big if you get skinny"

yeah? make sure you let me know how it goes! I didnt notice any problems with mine before it just stopping. Boost gauge is also fine

Just to confirm the speedo itself is working fine as is the rest of the dash cluster. all thats stoped is trip meter and the odometer. where am i starting? pull the whole thing appart and check for damaged cogs or??????????????/

'96 r33 gts-t series 2

i find it hard to believe its the cable. ill get a photo the odomoter is is PERFECTLY on 100k km would be a very big coincidence for it to give way on that reading dont you think?

ok so my car has just hit 100k km and the odometer and trip meter have stopped! Its reading exactly 100k and i have NFI whats going on How do i diagnose the problem? is it common? Help please

ok thanks...doesnt answer my question though

Ive been reading through but just getting mixed answers I have a 96 r33 gtst series 2. Currently has 17" work's not sure of the offset. However i dont want to do any gaurd rolling or flaring (dont want to damage the paint) so im assuming i couldnt get anything over an 18" What size, width and offset would you recomend for stock gaurds? THANKS

haha yeah sorry bout the new thread yeah i know there are some nice cars around i get jealous on a regular basis...thought there was quite a big diff in an $80k beamer and car that could buy a nice house. Do you mind if i ask is the guys local? or has he moved from interstate....wats he do for a living?

Has anyone ese seen this driving around hobart? ive seen in in north hobart twice now!...didnt believe it at first lol Has rego plates "F1" Who in hobart can afford a 430??

arsnik was stolen from the cinema carpark in glenorchy found burnt out in howrah i believe.

makes sense ssince uve got half the stuff off already...bu im a noob and dont know what the benifits would even be still learning

Hey fellow islanders! Title says it all, basically who can do decent alram installs in the hobart area? Ive had a new viper alarm sitting around i was going to get installed but my even just get a mongoose first. recomendations for installers please Thanks

im going to run with the everton as well! murchelagio was nice but i prefer the agressive edges of the everton more 2c

What your saying makes perfect sense...so next time make sure you drink more! I have no problems keeping mine in place its got a job and if it keeps the boys in blue happy heck ill leave it....i would like a smaller one though if it was possible lol After half hour on google im not seeing anything...although the design is fairly straight forward so i cant see why these wouldnt be interchangable between car makes and models so wreckers might be an idea

ummm.....dude and the point of your post was what? are you trying to increase the size of your penis or your ego?? I couldnt give a toss if the kit was made in china, taiwan or by terrys grandmother. Its a GREAT quality kit, fits well, clean cuts, solid construction. Comes at a reasonable price. Has excellent after sale service and results speak for them self!(see above pictures) Oh and just btw.... the company website is lambodoorkits.co.uk i think you'll find terry is from the UK not australia so maybe read up a lil before you look for things to whine about.