Fair Dinkum

If I was you I would forget PPG they are hopeless... I have got 2 of them in both my cars and they are Sh*T. I would recommend Modena enginering in Melbourne awesome product and would you believe Simon Pfitzner used to work for Modena thats how he got his knowledge... Stay away from PPG.

[Deleted By PranK - For breaching forum rules]

[Deleted By PranK - For breaching forum rules]

Hi everyone I need to get a good second hand or new windscreen for my GTR R34, big rock split it beyond repair. Does anyone have one or know where there is one. Please advise on mobile 0412 950192 or pm me. Cheers Dave.

Hi all, I need a windscreen for my GTR R34 does anyone know who would have one or who sells them... please let me know, genuine they are $1400 ex Japan. Please text me on 0412950192 or pm me. cheers Dave.

[Deleted By PranK - For breaching forum rules]

Hi, want a holinger 6 speed to suit a GTR R32, does anyone have one or know where there is one for sale. I have got a PPG but want to upgrade it to a holinger. Gearbox has to be in good condition not a blow up or a basket case..... You can pm me or phone me on 0412 950192. Cheers Dave.

Hi does any one have or know of where I can get a holinger 6 speed gearbox for a GTR R32 I have got a PPG in there now but want to upgrade. IF any one has a holinger and they want to sell it please pm me or call on mobile 0412950192. Cheers Dave.

Hello everyone, I am changing my PPG Gear box in my GTR R32 to a holinger 6 speed, if any one knows of where this is one or anyone has one and they want to do a deal with then let me know. I can either purchase the gearbox outright or can work a deal with the PPG. PM me or call me on 0412 950192. Cheers Dave.

[Deleted By PranK - For breaching forum rules]

[Deleted By PranK - For breaching forum rules]

Bump again..

Bump these are brand new perfect or rear alignment and has got white line bush kit.

There is no need to rebuild them unless you crunch the dog engagements with bad shifts, Run Shockproof lightweight oil and they are good for years. They are hard on the little nylon bush that sits on the end of the shifter that goes into the gearbox selector, keep a couple as spares and as they wear will be harder to shift, just throw in a new one and all good. Takes 1/2 hour.

I have for sale brand new set of upper control arms and radius rods fitted with the adjustable bush kit for GTR 32/33/and 34. These fit the GTTS as well. Still in the packets, both left and right hand sides. I paid $300 for them last week, but don't need them you can have them for $280 and I will post them to you. PM me or call 0412950192. Cheers Dave.

Hi I have for sale brand new set of upper control arms and radius rods with adjustable camber bush kits fitted for the R32/33 and 34. They have never been fitted. These cost me $300 off SK are still in packets both left /right hand side, not needed any more. You can have them for $280 and I will post post them to you, this is a bargain. Pm me or ring me on 0412950192. Cheers Dave.

Mate I have got 2 PPG gearboxes in both my GTR R34 and GTR R32 all you need to do is when driving on the street is to double clutch both up and down and no problem. If you are giving it full throttle as fast as you can push the clutch and change the gear you will never beat it, this is better for the gearbox as it is designed to be flogged. You will never break it unless you crunch the dog engagement all the time, they hate to be slow changed you have to be positive... Hope this helps.

need starter motor for GTR R32 RB 26 cant be from 2.5. If any one has a good one please sms me or call on 0412950192. Cheers Dave.

Need a starter for 2.6 GTR R32 if any one has a good one please sms or call me on 0412950192. GTS-T 2.5 is different so this is no good has to be of RB26. Cheers Dave.

Thats what you get for buying Jap crap.....they are cheaper for a reason everything the Japs make are to light for our conditions.. Get a PPG and forget it....

You get what you pay for.............get a ppg gear set.... wont be looking at it ever again and can thrash the crap out of it..

R32 GTS-4 4 WD has got 4.375 diff gear ratio Your car has got 4.11 diff gear ratio if it is standard gearing. So If you can find the GTS-4 diff centres remember you will need both front and back.

PPG GTR gearbox brand new with billet forks and main shaft, new bearings and every gear syncro replaced and D-tent = $ 8500 ( i have new sequential on order ) Hey Mick you boof head.......tell me more about the gearbox story....there was someone on the forums looking for a ppg box this week have a search. I think it was in the wanted to buy... You were going to send me the details for the suspension arms... still waiting.. Any way here is my mobile for the details. 0412950192. Cheers Fair Dinkum Dave.

My car is an R34 GT-R (it is my daily driver) and I am at the stage where I need a new clutch. The mods I have thus far is a blitz nur cat back exhaust system, HKS metal cat, and Apexi air pods. I plan to upgrade turbos, cams, ecu, boost controller and necassery support systems etc later this year. Hoping for around the 300-350 kw @ the wheels mark. Anyway, I was hoping you guys could help me and give me some advice on which clutch I should go for at this stage. I was thinking of getting a brand new standard R34 GT-R clutch from Nissan but am wondering if it will handle the power that I hope to achieve after the other mods I intend on doing. Also, if the cost of a standard R34 GT-R clutch is similar in price to an aftermarket one, then I thought I might as well upgrade. Although I also dont want to get a clutch thats too hard to drive. One aftermarket clutch that comes to mind is the ORC single plate clutch 409 series. Supports up to 400PS? What are your thoughts on this particular clutch? ie - hard to drive, bites hard etc? Dont bother with the Japanese junk doesn't matter what you get they are not as good as the aussie ones, Get a NPC twin plate I have got a GTR R34 and a GTR R32 both with PPG gearboxes and the NPC twin plate, the R32 has done hundred of 6000 rpm launches and has been in the car for 3 years does not even look like wearing out, remember that if you have got too much diaphram pressure every time you are pushing in the clutch your trying to push the crankshaft thru the front of the car.. Give CNJ Motorsport a ring in Brisbane and speak to then about their custom built NPC clutches. cost approx $2500 for the complete unit all billet alloy hat and can specify a lighter flywheel. You will have to change to a Push/pull conversion.