RicsR33

R33 stock air box R33 Rear Bumper white R33 Rear Pods white R33 Stock side skirts White 17" Rims - no tread. nothing fancy All offers want it gone pick up only. ill add more later.

I've ran a ebay turbo for 4 years now.. no dramas at all. t04e knock off running 14psi all day everyday. Times are changing.

10k thats cheap, very tidy car mate.

No white gtr front bar?

I paid $100 for a reconditioned one from my local Brake & clutch shop, Get your old one off and exchange it.

found thanks

Still chasing one

Found. thanks guys!

Forgot to write for the front calipers Stuart, ill see if i can find anything close tommorow if not ill send you a message tommorow mate.

Hi Guys Im chasing the metal brake line between the caliper and that rubber brake hose, broke mine today (front left caliper) and im in a stuck! Hoping someone has upgraded there R33 with braided lines and have one lying around Cheers Richard

Hi Guys Im chasing the metal brake line between the caliper and that rubber brake hose, broke mine today and im in a stuck! Hoping someone has upgraded there R33 with braided lines and have one lying around Cheers Richard

Hey mate Im chasing the metal brake line between the caliper and rubber hose, did you sell that with the brakes?

Hey Im looking for a White R33 S1 Front bar, Tell me what you got?? and condition and give me a price you want for it. Thanks Guys Richard.

Yes my vechicle doesnt use any oil either, although there was a little oil in the metal intake pipe just before the turbo comp housing. Other then that the car runs quite well, besides the boost tapering off in high rpm.

sorry test was done after car was moved around the block quickly so probably cold. also test was done dry.

Hi guys just did a compression test in my R33 RB25DET Results Cyl 1 - 155 Cyl 2 - 155 Cyl 3 - 140 Cyl 4 - 152 Cyl 5 - 155 Cyl 6 - 157 What do you guys think of these results? Good? bad? Is Cyl #3 to low?? All comments welcome!!!~!!

Hi guysMy rb25det seems to lose boost after it hits it's peak then tapers offThe rb25 has a t04e which is running .8-.9 bar (11-12psi) but once it reaches that it tapers off and is down to about .5-.6(7-8psi) by redline.. I've changed the actuator, checked all hoses and clamps.. This has got me stumpedMods (even ones that wouldn't affect this)Split dump pipe, 3inc (could be 3.5) full exhaust system with a highflow catFront mount intercoolerT04eSafcCheap boost controller (tried a gfb and did the same thing)Standard manifoldPodThere's more but irrelevantI'm not to sure if a boost leak would do this?? What do you this could be causing this massive drop?

Chasing a R33 400R Front Bar or Trial Front Bar, Hoping I can score one in white.. Pm me and give me a price.. Im in brisbane but I dont mind paying for shipping.

How much for front bar? sorry if its gone, only read the first page and not the solid 11

you have a pm

Bump Still for sale !

R33 S1 TURBO VGC MINIMAL SHAFT PLAY (FEW STUDS SNAPPED ON EXHAUST HOUSING) - $250 R33 S1 TURBO BACK FULL EXHAUST SYSTEM $150 R33 S1 STOCK AIRBOX WITH AIR GUIDE $150 LOCATED IN BRISBANE PM ME NEG ON PRICES

The manifold flange is attached to the exhaust housing doesnt matter how you rotate this it will still end up on the same angle.

No matter how u rotate the exhaust housing the dump will still stay on the same angle. might need to fabricate a new dump to suit mate. for the oil feed it should be vertical so just rotate the 2 housings so that you get it in that position then get some braided oil and water lines, you then may have to rotate the turbine housing so you can get your pipe on your snail. The most costly will be getting a dump pipe made to suit your turbo. probably around $400-$600 from your common exhaust shop.

yer when i got the turbo the port was only at 20mm, i was told this causes spiking on alot of these shit turbos so i got my fitter and turner at work to port it out to around 29mm, hyper-gear then built me a rear flange with a 33-34mm wastegate flap, im almost 100% sure that it overlaps the port by atleast 1mm all round, yea the exhaust will be the first thing to drop tommorow when im back at work with access to a hoist.