Stevoss

Headlight sold.

Front grills and boss kit sold.

Sorry mate its gone.

R33 gtr wing $50 gunmetal grey R33 / r34 gtst return flow intercooler and pipes $350 2500kg gvm double axle car trailer $2000 ono Rocker suspension 2.5m long ramps for low vehicles almost new Almost new tyres 2t winch 4x 2t tiedown points New lights Mechanical overide brakes Pre 1982 built trailer so no problem with not having a brake away system for over 2100kg Tare weight 500kg so a full 2t capacity.

Rails and strut braces sold S2 grill and boss kit pending.

Pm replied have some more items will list up as I find them. Autotechnica r33 seat rails both sides $150 for both. Standard smic and a few of the pipes $40 Standard injectora in fuel rail $40 Standard ecu manual s1 rb25det $50

All parts pickup newcastle R33 parts hks silent hi power exhaust and stainless jjr front pipe $500 front and rear strut brace $100 for both engine crossmember and engine brackets $100 rear subframe bare $50 r200 shimmed up diff really tight $150 2 pairs of rear shafts left and rights $50 a pair boss kit with old momo wheel $20 front grill series 1 no badge $20 front grill series 2 has been sanded down to fit s1 $20 passenger side headlight s1 has small crack $30 r32 rb20 air con compressor and idler bracket $20 r32 gtr radiator no leaks $40 rb30 block $50 rb30 crank $50 rb25 head complete minus covers $150 rb25 turbo manifold $75 r33 gtst front and rear brake conversion $500 Includes rotors pads and calipers Fr, rotors pads calipers handbrake cables handbrake and hubs Rr Pm me or email me [email protected]

yep further to the posts above i removed the rear sub frame and diff and they are not included but the shell is now free!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! will ring scrap metal recyclers on Tuesday and organize for it to be taken on Friday, so if you want it don't mess around.

Anybody want a free r33 shell.

i want to strip the brakes out of my r33 shell but keep it rolling has anybody done this with removing the drum assembly and everything?

okay after thing about this some more i hadnt started on removing the brakes but unless there is a easy way to remove the rear brake set up and still have wheels on it, it wont be rolling anymore, so price will reflect that @ 400 obo. will be scrapped in 2 weeks and i would have to rip everything else out and sell that individually

email me [email protected] or pm alternatively here are the pics

Complete shell forsale again, had sold this to my mate but he only wanted a few things off it so now back up for sale. Need it gone soon. Good panels are straight All glass Shimmed up diff Bad Bent lca and tierod No motor or gearbox, brakes, Missing headlights, interior except dash and door trims, Cut loom Pickup only. Will get photos tommorrow.

http://www.boostobsession.com/ I dont know if damien is still around but his manifolds look awesome.

Cause im such a nice guy http://forums.justcommodores.com.au/vr-vs-holden-commodore-1993-1997/198433-rb25det-conversion-vs-calais.html

Look on justcommodores.com there is a thread called rb25det into vs commodore it has some good info aswell, my suggestion with the wiring is using the rb20 into r31 pinout match them up to the vp. Also in that thread.

found an interesting knock guage by chance that some people are using on the nistune website. http://www.knockgauge.eu/mos/Frontpage/Itemid,1/ available here on ebay.com http://www.ebay.com/itm/Knock-gauge-for-detonation-sensor-klopfsensor-NEW-/111001458207?pt=Race_Car_Parts&hash=item19d833d61f&vxp=mtr $50 + freight It is knock gauge. Brand new. Hand made. Very bright LEDs. It is clear when light off. It is hard to miss detonation signal. Dimension: 65mm x 50mm x 20mm (L x B x H) exact dimension may vary. Weight is ~70g Wire Length: 1m by default. Longer cable have exceed weight restriction for shipping cost. Contact me if you need longer wire. Mounted in a plastic box. SENSOR IS NOT INCLUDED. Customers use sensors: Knock Sensor for Audi & VW OEM# 0 261-231-038, KS16 ; Honda #30530-PV1-A01; You can prevent damage of your engine by monitoring detonation signal. It appear if air-fuel mixture is wrong for some conditions. This gauge monitor detonation at begin. So you have some time to react and save your engine. That gauge work with noise signal at unique frequency. Detonation of most car is near to same frequency. That mean that this gauge fit to all car. If you are unsure in it do not hesitate to ask me about it. Very useful in race condition where no time to look at other gauges (EGT, A/F and etc.). It could be mounted straight on wheel or dashboard or anywhere where driver could see that gauge. you do not need to focus sight to gauge to see what result shown by device. When detonation appear you will see very bright led light on. Led brightness is bigger then stop signal of some car. You couldn't miss that signal. You can choose other combination of led color of green, blue, yellow, orange, red. (detonation signal RED ONLY). Analog output is optional. It costs 20USD in addition. You can use output of gauge as input to your ECU to manage ignition or fuel if you ECU has AUX input. Also possible to use with some retarder or ignition controller. Options for output: 1. As switch to ground; 2. As switch to +12V; 3.As 0v + 5v output; Let me know if you need output. Mounting diagram: Troubleshooting: 1. Q: Gauge is connected to sensor and power supply. One green LED lights on only. Engine running at idle or accelerated. No more LEDs lights on in additions. A: Check first green led when accelerating. It must change brightness. If not then check wire connection of sensor. Especially ground connection of sensor. Resistivity of it must be lower then 100Oms. 2. Q: Gauge not work at all. A: Gauge is tested twice before shipping. First time after assembly, second time after fitting in to plastic box. It is impossible that gauge is damaged in post system if plastic box is OK. Check wire connection. Or it possible that your OEM knock system not compatible with this gauge. Try to use separate knock sensor. WARRANTY. If you gauge stop working contact me first and we will discuss about it. If gauge was damaged by car crash warranty void.

rb25 gearbox looks like this (no linkages) have you bled the clutch lately?

sold 17/02/13

sold

http://justjap.com/store/home.php?cat=275

spliced in would cut the tacho signal from the original cluster, had to wire in a resistor to make them both work at once, cant remember as it was ages ago but i used a multiple resistance pot to find out what worked and then soldered it inline to the eboost 2.

Check my topics rb30 block 25 head etc going cheap.

bump 20.01.13

bump 20.01.13