rarebird

Thanks for the reply and advice. I will visit your shop in the near future cause i need some other goodies as well as a cooler. Cheers Peter

Another question. I am interested in the medium size cooler for my R33, however i would like you to confirm that the piping kit would be suited to the smaller cooler.Is there a compatible piping kit for the smaller cooler? Thanks Peter

Who does the remap for the R33 ecu? I have an auto as well and don't wan't to loose the smooth gear changes. Can someone point me in the right direction. Peter

The Blitz LM intercooler kit uses the standard route for piping from what i could find out.I too am not keen on cutting and hacking away at my car just for the sake of saving a few $. Do a search or call Autobarn who sells them. Oh and they are slightly smaller than the Hybrid cores. Peter

I personally would not like to cut fan blades , but if it works for some people go ahead.Check out these instructions attached and i hope it helps as a general guide. GTS150dpi.pdf

I am in need of a steering wheel from a standard R33 skyline in good condition. Located in Sydney.Email me on [email protected] or call 0416490728. Peter

Thought it looked familiar.

You are exactly right Jayson.I too had the head removed from my old red top eccs Rb20det-r and it looks exactly the same as your picture(12 ports),even though it had the 6 runners on the plenum.Cheapest power upgrade for top end power has to be to remove the butterflies.Shit job though. Does someone have a picture of a silver top Rb20 head,i would like to see the difference.

Thanks heaps guys. Peter

This is the 3 way i was talking about.

I understand all that,however the hose that comes off the actuator gets to a point where there is a 3 way connection. One hose goes to the intake pipe which leads to throttle body and the other one goes to solenoid. Would i be correct to assume that if i removed the 3 way connection and replaced it with the Turbotech(fitted the way you described above) that would leave me with 1 hose from the solenoid left over.Plug the solenoid hose and hope it works. Does that sound right? thanks Peter

I have also been inspired by this thread and just couldn't resist the temptation and purchased a unit from Mark. My car is a completely stock R33 95mdl. I have read through all the posts and call me stupid but i can't find any clear info on how to install the turbotech to a 33. Can someone be kind enough to give a description? The instructions are not model specific so i don't want to get it wrong and do damage. Thanks Peter

Has this question been answered yet? Some pics or copy of fitting instructions would be great, if possible. Peter

I am interested in the R33 kit,however if you can answer a few questions to help me in my decision process it would be appreciated. *What type of FMIC would this kit suit e.g HYBRID style etc? *Does the piping go up and over the engine or is it the factory route? *Do they come with fitting instructions? Thanks Peter