DESCR8

Pro2835: please reply to the email i want to buy the entire car

PM Sent

hi im interested in buying the car jordan email me [email protected] or sms me 0405 295 897

No will not seperate

George if you were abit more realistic on prices then you would have one already obviously you are shopping on price

Ive got one on mine interested in swapping for an aftermarket one if you got it Jordan

Guys Must sell ASAP off a 97 GTR done 37,000kms you get Front Callipers and Rear Callipers Front Lines and Rear Lines Front Discs and Rear Discs Front and Rear Pads $2000.00 No offers are available for pickup this wednesday or friday. WILL NOT SEPERATE Email me if interested [email protected] PS: No pics as i dont have a Digital Camera (mine got ripped) Willing to ship at buyers expense Jordan

Dough interesting why do you say that ? Jordan

Well the pistons with Total seal rings owe me $1800 so offers close to that will get them they are brand new, and will be perfect for your HP Levels As far as my engine having room for more i am going for broke on this engine so i will give it all it takes and hopefully not too much Jordan

Well i havent finalised what shell my engine will be going into but if it is a 180SX or S15 thats the only way i can see of fitting a RB25or RB26/30 under the hood without cutting a hole. Well those rods you have are for a V8 and i think are rated at 800 for the 8 which means that works out to 600hp for the six you will be using. I would recommend and Argo or Eagle rod to suit they are more expensive but i know they will hold up having said that im not saying the scat wont just had no experience with them. My pistons are worth and cost me more than $1200 so unless you are after a top shelf pistons with top ring set i cant help you. Just remember you are aiming at making 800hp from six cylinders which is 133 per cylinder a v8 only has to do 100 per cylinder keep that inmind Jordan

2) Nissan have them 3) Yes ive got a new set of JE 87.5mm that were going into my previous build but i decided for more HP so went to 86mm pistons. Emal me if you are keen on them 4) Yes whos building it for you ? 5) Well if its a race engine whats your budget? 6) Go a dry dry sump have a low profile sump made and then have custom mounts made like i said whats your budget? Jordan

Daniel, Here goes. 1) Yes you can 2) Use a R33/34 oil pump with the collar 3) You should use RB26 ones and set CR to 8-8.5:1 4) There are a couple of ways to make it fit 5) 750Hp is easy and i assume that at the crank, the rev should be kept as close to 7,000rpm as possible. unless you are building a race engine 6) If you lower the engine you will have sump clearance issues just cut a hole for the front of the head to fit through the bonnet and get a bulge made similar to the BA XR8 ones I am curently building an engine like this but to a much higher level is you need some parts ive got some spares email me [email protected] Or ask any questions Jordan

Parts must go taking up too much room BUMP BUMP BUMP Jordan :)

Ive got a set of 87.5mm JE Pistons that comes with Total Seal ring set if you are interested in a good set not a cheap set, they are new in the box email me [email protected] if you are interested Jordan

Hi Got the following left and ive lowered the prices Engine complete $7000 Diff $900 Interior $1200.00 (Damaged) Brakes $2500.00 (New DBA4000 Series Discs) Xenon Headlights $1900.00 Bonnet Lip $300.00 Front Bar complete $1200.00 Intercooler /w piping $1000.00 Front Strut Brace $300 Rear Strut Brace $300 Master Cylinder $200 Gearbox Cylinder $300 Shocks/springs $400 Please email for quicker response if interested in parts [email protected] Jordan