Jump to content
SAU Community

boostn0199

Members
 View Profile  See their activity

  • Posts

    2,536

  • Joined

  • Last visited

  • Feedback

    100%

 Content Type 

Everything posted by boostn0199

  1. boostn0199
    Alot of people just get that ACL flexible heat shield material and you basically bend and cut and make whatever shape or size you want for whatever your covering, easy and works well.
  2. boostn0199
    123-132 NM real tight.
  3. boostn0199
    But wheres the actual proof that the fiveomotorsport ones have a poor spray pattern? from what ive heard everyone thats run them on various cars has always said they are great. Its true there are dodgy hiflows out there but doesnt meant all of them are.
  4. boostn0199
    Cant remember of the top of my head what size exactly it is as it was a few years ago when I took mine apart but I would just get one from nissan.
  5. boostn0199
    Just chucked my 1000s in and set them up on the pfc and idled perfectly like stock so far so good next week will see how go on the tune.
  6. boostn0199
    Mate the 33 drum setup is awesome thats why heaps of s chassis guys put it in there car just need good shoes like project mu thats what im using and its perfect just make sure all parts csbles and its sdjusted propetly nd ull have no problrms.
  7. boostn0199
    Was bored thought id revive this thread with some recent work I did on my drift car over the last week of cooler piping, dump, screamer, intake etc.
  8. boostn0199
    nismo 550 side feed injectors x6 removed couple of weeks ago and have sealed them in plastic bags worked perfectly running on e85 $500.SE melbourne area Pm or 0422445339
  9. boostn0199
    Yeah did it a few times gets better thsn starts again, asked tao he said bearings are just dry cause turbo been out for a while.
  10. boostn0199
    Took my turbo off couple of weeks ago rotated housing and comp cover was fine then all of a sudden today its rubbing when u turn it by hand. When i loosen all the bolts its fine as soon as tighten rubs again cannot figure it out.
  11. boostn0199
    You only need to worry about the springs if you were dropping in a set of cams as the extra lift might be to much for stock old springs to handle but if stock cams you dont need to touch anything just good tune.
  12. boostn0199
    If your fusing with stainless as most ppl do for cooler piping yes you need a perfect fit to have a nice weld. Yeah I also agree aswell my cheap shitty drop saw cuts pretty straight just have to linish with a grinder and die grinder and they fit spot on.
  13. boostn0199
    dam thats awesome its what I have always looked for but never been able to find it, would buy if I had money.
  14. boostn0199
    Your options are either cut off drop saw which will do the job but annoying that you have to clean each cut up alot whereas bandsaw does a pretty clean cut and not much if any clean up is needed. I personally have been using drop saw but will be changing to a bandsaw when I get the money.
  15. boostn0199
    Id be going the 15-60 if its a track car just for a bit more insurance since your gona be heating up the oil.
  16. boostn0199
    If u have a powerfc just change the injector correction vaule and you will be able to drive tothe tuner.
  17. boostn0199
    Personally been using nothing but ryco in the skyline and any other car never had a problem imconvinced its a good product.
  18. boostn0199
    I also just got these today in the 1000cc will update as to how they go as for 600 great vaule.
  19. boostn0199
    Unless you already have the injectors then just use some jecs hiflowed ones they go up to 1200cc these days and are direct fit.
  20. boostn0199
    Heres a couple pics of my new piping that I am currently working on, love using lobster back can make any type of shape you want so easily.
  21. boostn0199
    You adjust it from the collars on the spring its the non base adj type.
  22. boostn0199
    I never said do it on the highest setting Ive always used the 200nm setting, I would think its common sense that you wouldnt be pumping it to 800nm setting as some of the guns do go up to.
  23. boostn0199
    Why? Theres nothing wrong with rattle gunning it as in reality thats how the majority of people and workshops would have done it and have not had any problems.
  24. boostn0199
    Rattle gun torque will do the job.
  25. boostn0199
    Poncams seem to be the popoular drop in choice for that power level im happy with mine gained mainly in midrange and 10 kw peak.
×
×
  • Create New...