Jump to content
SAU Community

boostn0199

Members
  • Posts

    2,536
  • Joined

  • Last visited

  • Feedback

    100%

Everything posted by boostn0199

  1. this seems like a real great deal if i hadnt of just completed my 300kw similar setup i would be considering this, cost me about 7-8000 for all the stuff you have here and it direct bolt on
  2. they are all the same the only difference is as paul said there are fake ones but genuine are all the same
  3. Just wondering would this setup be right if i dont want to use the filter
  4. nismo 555 wil do the job or 740 if you want to have some room for more power
  5. just read the whole post very interesting read and got alot of information out of it, im in the process of bulding my r33 im aiming at around the 300kw mark on my stock motor , see how it goes in at the tune soon, hoping the motor lasts for abit while i save money for a rebuild where I can push some more power like you have, well done it was a great project
  6. prety hard to tell if got no markings then it wouldnt be since hks blitz kakimto all have markings looks similar to mine will do the job
  7. its cheapest ive found for nismo 555, slide has them for like 1400 or something so im happy with 1050
  8. nismo drop ins are the best cost abit more but no hassle and 2min swap
  9. Hi, just wanting to buy some nismo 555 injectors for rb25 from performance wise, he sells for a good price $1050 delivered, just wondering if people have dealt with with him and if hes a good trader? thanks
  10. mines been in for 35000 if i take it off to change the idler and tensioner pulleys do i need to replace the belt or can i reuse the same one
  11. as the guy said above they seemed to have no play in the bearings and span with not much noise , and I did take them off just didnt replace them
  12. so can anyone confirm if the rb25 is interfence or non interference motor
  13. by the sounds of it most people have changed both, the only reason i left out the tensioner and idler were when I inspected the bearings at the time they were fine , hrmm wishing I had of just changed them
  14. yeah ill do the tensioners cars off the road now anyway, where can i buy just the tensioner kits from, would repco and places have then since they have the belts?
  15. yeah im thinking of taking it apart and doing the tensioner aswell now
  16. i changed my belt at 100k but didnt do the tensioner/idler pulley and ive gone 35000 since i changed im planning to change it at prob 180k wondering if itll last
  17. Just throwing up a question of interest, we all are adviced to do the timing belts every 100k just wondering if anyone out there has gone the full distance with there stock timing belt until it snapped or had a problem due to the tensioner bolt , interested to know how long they actually lasted
  18. yeah my mistake i was finking of stock injectors as .582 rather than .528 doing calcuations adds to .18 your right
  19. why is the latency 0.18? if the 555 is 0.71 and stock is 0.58
  20. Im getting to upgrade my stock injectors in my r33 gtst to nismo 555cc injectors and want to set them up so i can drive to the tuner to get tune. the stock injectors are 370cc so ive worked out the corecction to be .67, now with the latency diff i know its the new latency minus the old latency , but i dont know the latency for the nismo 555cc injectors but i know the stock ones are 0.528, so can anyone give me the vaules they have for upgrading to 555cc nismo in there rb25 or tell me the 555cc latency thanks
  21. yeah I just measured up the sensor hole and it was 7mm in the stock cat and only 5mm in the xforce but the tread was the same so just drilled it out now it fits fine
×
×
  • Create New...