BNR34boy

I have 2 apexi Rx6D turbos and I need to rebuild them. Does anyone know where is a good place to get them rebuild? Thanks

hello, are the r34 gtr factory injectors 444cc still available?

Hi, I got a GTR34, i would like to change the transfer case oil. Is there a step by step link someone can teach me?

i also have a r34 GTR, what kinda fluid is to use to bleed the clutch? and can any tell me how to bleed it? thanks

is this the same on the GTR34? what kinda fluid is to use to bleed the clutch? some people say GTR uses different kind of fluid. Also, what is the resevor on the right side of the truck? BTW, i am new at this, please explain.

did you change larger injectors? it you changed it, you might want to change the setting your ecu

Does anyone know what is the part number for the AAC valve? On my R34, i think my AAC valve is getting bad. My tuner told me the idle is really bad and sometimes the car just dies after reving the car. please let me know if you know the part number..

Hi, Does anyone have the R34 interior diagram? I am missing some parts around the glove box area. I have the glove box, but couldn't put it back on because some of the parts are missing and I don't know what parts. Could someone please help??

Hey guys, Can anyone tell me why the 4wd light randomly comes on? It happened to me couple times already. Sometimes while I am driving and sometime when I first start the car. please advise me..

should check the intercooler piping and connectors. Sometime the leak it so small that you can't really see it. I usually spray water and add a little bit of soap mixture and see if there are any leaks

I have the koyo radiator on my R34 and its really good. I'm satisfy with it. Also, its not that expensive!!

I have tried to re-use the HKS 1.2mm head gasket on my GTR34 to change the valve spring, unfortunity the compression was not that good and y mechanic told me it is leaking. So, i suggest you might want to get a new gasket so you don't have to spend time and money to do it over again.

Is it also goes with the R34 as well? does it also take auto transmissions fluid, because I'm using the nissan factory oil. The oil color is Red. Does it make any difference?

I mean the reseviour in the back trunk, on the right side.

I have install 600cc injectors in my BNR34, but its seems really rich. My LM-1 reads 9 something to 10 something. In the PFC, i've set it to 74% with +0.04msec does it seems right? Now, i've lower it to 71.5 with +0.04msec, it seems to sputter a bit when its over 3000rpm. Anyone have the same size of injectors as me? if you guys do, what did you guys put in your PFC?

ok. Thanks for your info..

Hey guys, I just got a question on the power fc datalogit. If I have two cars (BNR34 and RX7) and i'm also using PFC on both of them, does it means that i have to buy 2 datalogit? The reason I ask is because on the website where the company sells it, they ask for specific car.

I am using innovative motorpsorts's wide band sensor and its telling me its rich. Also, from my muffler, it coming out a lot of black smoke. So, i think I need to leaner the car.

I tried to leaner my car(BNR34) with the PFC, but I can't!! I have the following mods: HKS valve spring step 2 Jun 264 cams IN/EX Jun cam sprockets Jun Oil pump HKS 1.2mm Head gasket Nismo N1 turbos Nismo fuel pump Apexi Power FC 600CC injectors Anyone could give me some ideas? When I rev up the car to 3000rpm, the engine light flashes and would go up further? please help!!

It happened to me when I have my GTR R33. Back then, the reason that my car sputters is because the fuel pump is getting too old. It wouldn't pump enough gas, so my car sputters. When I upgrade to the nismo fuel pump, the problem is gone!!! Another problem might cause it is probably you have a vacumm leakage!! try to check the intercooler pipings. Spray some water/soap to check if there is a leakage!! Hope it could help you!!

Its better to upgrade your fuel pump!! A lot of people said skyline stock fuel pump does not provide enough fuel!!! many of my friends get the nismo upgrade fuel pump. Also if you're going to upgrade turbo or anything else, you don't have to worry about your fuel pump again!!

I also got my new engine put in to the car. When I first started the engine (for the first hour), it also blew out white smoke, but it is normal!! Also, in your engine bay, you could also realize there is so smoke burning, that is because the gaskets are new and need to be properly sealed. For you info, if you're car blew out white w/steam: you engine is good!!! (you could also smell the steam from the exhaust) black: you're car is too rich!! blueish: you're head gasket is blown!! (you could smell coolant from the exhaust) Hope you're engine is healthy and ready to go!!

Guilt-Toy, I pm you with my e-mail address already!! Thank you guys for helping!!

My friend have a copy of thr BNR34 Workshop manual, but its all in Japanese. Its like 700 some pages (single side). I'll try to ask him if I can get a copy

Have anyone change the oil for the ATTESA E-TS oil on their BNR34? I don't know what kinda oil I should use? anyone have any sugestions? The reason I ask is because my mechanic used some kinda oil (i don't know what kind), it made my car drift? Some of my friends said probably he didn't use the proper oil or properly release the air for the Attesa E-TS system. Please give me some advice...