Jump to content
SAU Community

SXC32

Members
  • Posts

    36
  • Joined

  • Last visited

  • Feedback

    100%

Everything posted by SXC32

  1. Hi would you have the climate control by chance
  2. Yes it will there is two just inside at about knee height
  3. Yes but you won't have air bag light
  4. Disconnect the relay in the boot behind the skyline
  5. R32 Skyline Cut outside 30mm below point of bend cut underside at the point of the bend make 4 cuts in the front peace to be bent under at even intervals to the point of bend. Bend under and weld to underside grind body fill sand and paint.
  6. Do you have the drivers window control
  7. 33 was an auto det the 34 was Na the speedo take off that has a blank bolted in it is low on the right behind the gearbox mount
  8. No it's not drive unit is to big and the position is at the rear of the box if it was that easy I wouldn't have posted
  9. I have installed an R34 gearbox in a R33 works fine but the speedo sensor in the R34 is in the diff. There is a blanked off input on the right rear of the gearbox with a worm drive visible in there. Has anyone put a drive unit into the R34 gearbox in to get the speedo working on a R33. Cheers.
  10. I have installed a R34 gearbox in a R33 works great but the R34 speed sensor is in the diff, there is a blanked off input at the rear right side of the R34 gearbox and there is a worm drive in there I was wondering if anyone has put a drive unit in there to have a working speedo. Cheers
  11. Help I have an R32 GTS-4 with Rb20DET with a fromt mount everything else is standard when accelerating it runs fine if you feather the accelerator as soon as you put your foot down it splutters it will stil rev out but has no power and comodores can beat me. Help.
  12. Hi I have an R33 with an auto and it wond rev over 4000 RPM when its in drive when its in 1 st or 2 nd it will go to the limiter help please.
  13. Do you still have the rb20 injectors
  14. I am located in mackay QLD
  15. R33 front suspension and steering rack to give away asap.
  16. RB20DET Head complete with highmount exhaust manifold in good condition all valves and cams ready to go. $500.00 ono
  17. After much rewiring i found that the wire that was required from the coil to the computer was from the - side and i had it on the + side, motor and gearbox now running like a dream thanks for all your help.
  18. Going to try a new computer tomorow still tries to start but will not run have been over the wiring all day and looking at the 280Z all looks the way it should so can only think that may have spiked the computer while changing the coil or something.
  19. The fuel delivery system is out of the 280Z
  20. i have taken the l28 out of a 280Z and put it in my c210 it will fire some times but will not run i had it running in the z with all the loom in the engine bay but now it has spark and power to the injecters i dont know what is missing.Help
  21. Car was manual i have no engine parts
  22. Come on all prices are ONO and parts have to go i dont want to take them to the recycle centre.
×
×
  • Create New...