wannabe

Thanks for getting back to me gents. And congrats on the sale.

G'Day Mike, I am very interested in these... I have a question though are they ADR compliant? Cheers Mate.

There is EFIS in Vic Park ph: (08) 9470 1303 or recently i have used Fuel injector man in Morley ph: (08) 9375 2478 Both did very good work though i found the customer service was a little better at the latter

So at least between you have the whole deal! Let me know if you want the boot liner plastic

*double post sorry*

I got all the side bits that you need but my GTR came carpetless for the bottom. If this helps you are more than welcome to come around and borrow the stuff! I got through compliance without any hassles and the place that i paid to comply my car did an absolutly terrible job!

Did you still have the o-rings?

Congrats. Thanks for getting back to me!

Howdy, These still for sale?

HAHA, Thanks for the tip. Isn't it funny, different day different service. I had a below par experience with them in the past... Maybe i caught the guy on a bad day. Thanks for the reply

Howdy Good SAU folk, I have a bit of a leak on my number 5 injector in my R33 GTR. As i am going to be pulling the injectors out to fit new seals i figure i would be well served to get them cleaned and flow tested at the same time. Can anyone recommend a good injector cleaning place? I am happy to go NOR, SOR or i hear that there are some pretty decent mobile ones now. Any advice would be great. Thanks for taking the time to read. PS, I have done a search and could find nothing that had the info that i wanted that was recent. If i have missed something feel free to unleash the flame!

Thanks Mick and Ferni, I appreciate your help and advice. I will definitely consider the series 2 and 3 airbag wheels as soon as i establish what it is i need to make the airbag work again! I am going to be pulling the dash apart next weekend to try and get the light working so i can run the diagnostics. If that fails i will certainly be hooking the car up to consult! Thanks again for taking the time to post! Have great Aus Days

Anyone? Any help at all? Even just where i can look to find further info? Please... Not to sound needy but i really don't want to get a yellow sticker over this!

Hi All, I recently imported an R33 GTR V-Spec (1995.) I was aware when i purchased the car from the broker that it had the standard airbag wheel replaced with an aftermarket Nismo one. During compliance it was all good, borrowed a wheel and got over the pits fine. But now i have to return the airbag wheel and go back to the nismo one. This raises a couple of issues for me: a) It is a yellow if and when the police pull me over for my "routine licence check" -and - b) My wife drives the car so i would prefer it to be safe. This means that i want to convert BACK to an airbag wheel. I have done heaps of searches but have found no firm answers on this topic. Does anybody know if you can put any other car's airbag wheel on? For example i like S15 steering wheels a whole lot more than R33 GTR stock steering wheels or even R34 steering wheels, so i would love to know if they can be substituted? Any steering wheel that has an airbag and is going to work on a 33 GTR would be worth knowing about. Does anyone know if the airbag warning light has to work to do the airbag computer check that i found in another thread? I think mine may have been disconnected as it has never worked (as in light up, even when it had the airbag wheel on.) I would like to run a diagnostic on it before i buy a new steering wheel just incase the car has been in a bingle and the sensor needs to be replaced too. This is an excerpt from the thread that i am referring to: THIS IS HOW TO RESET THE AIRBAG COMPUTER First you have to put the system into the diagnostic mode. Here's how to do this: From User Mode To Diagnosis Mode: Diagnosis Mode activates only when a malfunction is detected, by pressing the driver's door switch at least 5 times within 7 seconds after turning the ignition "ON". SRS will not enter Diagnosis Mode if no malfunction is detected. From Diagnosis Mode to User Mode: After a malfunction is repaired, switch the ignition "OFF" for at least 1 second , then back "ON". Diagnosis Mode returns to User Mode. If switching Diagnosis Mode to User Mode is required while malfunction is being detected, switch the ignition "OFF", then back "ON" and press the driver's door switch at least 5 times within 7 seconds. After a malfunction is repaired, return to User Mode from Diagnosis Mode by switching the ignition "OFF" for at least 1 second, then back "ON". At that time, the problem code is cleared Any help or advice will be gratefully accepted PS sorry if there is a thread that covers this, i searched heaps of times but was unabelt o find one!!!

I just had a 33 GTR complianced and they left the seatbelts that were in it in Japan. It passed the pits like that too. I have doubts that compliance was done properly though so i would love to hear from people in the know what should be done.