Hawker180

Yeah thats my car, it hasnt been on the road for 4 months now, Still needs to be tuned! So u can imagine how much im itching to get it going again...after all those mods! I think the rims may clear if the guards lips are rolled! Would look even sweeter with these new rims!

Have your guards been rolled?

yeah the cars lowered! Apexi Pressure adjustable struts (nothing too low - tyres arnt under thr guards or anything, cant change ride height - also these things are real stiff expecially on stiff setting) Ride hight from wheel centre to guard is 33cm front 35cm rear Guards havent been rolled but id say they will be if i get these rims! thanks in advance roy!

Hey will these rims fit on a R32 GTSt Apparently there off of a supra/soarer! 18 x 8.5" front, +40 offset 18 x 9.5" back, +39 offset the current tyres on them are: (seems abit narrow for the rims???) 235x40x18 245x40x18 my first thoughts were that they wont fit, but it doesnt hurt to ask!...or does it???

hey paul, nice FAQ, just one thing though down the bottom you have typed "http://www.syklinesaustralia.com" the k and y around the wrong way Great job none the less!

hey paul, nice FAQ, just one thing though down the bottom you have typed "http://www.syklinesaustralia.com" the k and rhw y around the wrong way Great job none the less!

Hey, I have a R31 (Series 3) Silhouette as a daily! Also i happen to have a lot of RB20DET parts lying arround (R32 half cut - stuffed engine)!...and i was thinking (as you do) of combining the 2! Any chance the R32 manafold, R32 turbo, R32 injectors etc...would go on to the RB30E? And would the R32 injectors run happyily with the VLT ECU? or would i have to buy VLT injectors? Id only run the turbo on stock boost of course, and i also have a stock R32 Inter cooler) thanks Luke

Thats exacilly the same as my girl friend, except now shes at uni and 2 hours away, so i get plenty of time to work on the car! She suprises me all the time with how much she knows, she just listens when i talk to my mates and always wants to attend the drift meets when ever possible! her dream car is an S15 (which suits me fine), and she loves to drive the skyline....but my stereo just wasnt put in for destinys child music cranked up to the MAX!!!

personally id leave u r existing ecu in, then drive to tune shop and just get them to put it in and tune it at the same time. Then again it depends on what you have done to your car, the base map runs very rich, and should be ok (if you stay off boost) and if the car is fairly standard! If u have aftermarket injectors etc...then it will probably be too rich to drive and you will need to bump fuel flow down! With your mods it should be ok to putt to the tune shop!!! english manual is at http://www.apexi-usa.com/documentation.asp learning mode - The car must idle for 10mins etc (is expalined in manual)

Ok just an udate for anyone who's interested...with the power FC i had to knock the flow down to 50% (thats how much better the rx7's flow than the stock 270cc's I just matched up left and right with the new plugs and away it went!

Willing to consider any reasonable offers!

can you just put some steel wool in the catch can??? Also does the catch can need to breath...like at the top of it???or should it be sealed tight?

Ok cool, Im more interested in what the rest of the car can handle? eg Rx7 injectors, internaly standard RB20DET

I didnt know they made trust front bars for R33 skylines I have one for a 32...does that count???

Hey guys! Just wanting to know how much boost i can run and what sort of rear wheel kw's i can expect at a few different boost settings (eg 1bar and 1.2bar) Car: R32 GTSt RB20DET Mods: HKS 2530 Power FC Apexi AVCR 460cc Rx7 Injectors Walbro 500hp fuel pump All the other normal stuff: Front mount IC HKS BOV HKS POD Full 3 inch exhaust (twin pipe dump too) The Wastgate arm has been spaced out with spacers...and has an adjustable boost arm on it, Is longer arm less boost or other way around??? Also I was hoping for a High and low setting of boost, but i think the arm is set on 1.2bar??? Thanks for your help!! Luke

SAFC-II Still for sale $450 ono!!!

Nar sorry mate, I just got the local exhaust guy to make me one up, he did a good job too Thanks for the reply!

I would definatly think that it would work on a R31 RB20, but am not 100% sure

My upgrade plans changed as i brought the SAFC2 and before i recieved the SAFC2 i blew the stock turbo, so I decided to upgrade to an aftermarket turbo! therefore need different injectors etc... so i really needed the power FC! Luke

Ok, no problems, ill just match them...left to left and right to right.... thanks heaps for your help! monday they go in and friday it gets tuned....I CANT WAIT *havent had car on the road for 3 months and the R31 just doesnt cut it...hehe catch ya!

Sorry Skyline Geoff...The injectors are SOLD You we a tad bit too late! Sorry

Both still for sale!

Thanks heaps mate... by the way the rx7 plugs have: 1 Black wire (with yellow) and 1 light Green wire (with red)

anyone???

bump