Hawker180

Ill take the HKS front pipe if it fits a R32! I asume they are the same???? Thanks Luke

yeah, im driving my sisters car around! Im still waiting on my Power FC to come from nengun! The Wastegate arm is set to 1.2bar..so its abit hard to turn the boost down Thanks for u r help!...Not driving the skyline sucks so much ...aww well

bump Still looking for an answer! Thanks!

Bump! Still after a Engine pipe! Cat isnt as important!!!! Thanks!

Hey guys, Turbo installation went well on the weekend! Now im just abit too nervice of driving it as i dont want it to run lean! I have an SAFC-II and was going to just pump the fuel up abit, just incase i do hit alittle bit of boost! ANyone got any ideas as to what percentage i should pump it upto? i had it on 10%+ correction but wasvery unsure! This is only tempary for a week or two! and id rather it alittle rich than lean (as you would expect) Any help would be greatly appreciated!!! Thanks Luke!

Wicked, Thanks guys!!! Putting around will suck though Aww well!...ill put up with it!

Hey, I finnally have a NON-Busy weekend coming up! and was going to fit my new HKS 2530 turbo to my R32 GTST! The plan is to get a Power FC (will be a few weeks off yet) injectors are in the mail as week speek! I was just wondering if the standard ECU (mines Chiped) and standard injectors would be able to work propperly if i just putt the car around eg. work n back etc.. untill the Power FC & New injectors come???? Then Of course ill get it all tuned up! P.S. The new fuel pump went in last weekend! Thanks Luke

Hey, I need a 3" Exhaust Front Pipe & a High Flow cat (both stainless) for my R32 GTST (RB20DET)! The Front pipe cannot be a dump/front pipe as i have a twin dump pipe to go on! Any suggestions on where i can get these exhaust bits from would be much appreciated as its fairly urgent!!! Thanks

Ok i now have a HKS 2530 turbo to go onto the RB20DET, also hopefully going to buy a Power FC! Anyway I have a set of GTR injectors and am wondering how hard they are to convert into high independence? I try to do most of the mechanical work on my car but am unsure if i can install this "resistor pack"??? I was talking to a fellow skyline owner and he commented about my stock clutch and said "dont bother taking it to get tuned with that clutch, as it will melt!" (he is one of those people who really dont like to be beaten and then craps on saying i need to spend more money etc...) I thought it would be fine as long as you dont launch as high RPM's etc... Also im 4 hours drive away from where i get my car tuned, would it be ok to bolt the turbo up, install the power FC and injectors and just cruise down (not boosting at all) Thanks for your help! Luke

Hey, im having a problem with my RB20DET (R32 gtst) When i rev the car to about 4000rpm+ sometimes I get a popping noise from the exhaust. It doesnt seem to loose power but as you can imagine i am off the gas as soon as it happens! Anyone got any ideas on what it could be? I was thinking faulty coil packs or Sparkplugs!

Thanks Both for your help Roy - I think nengun sounds like the GO! I didnt think it would be as quick as 5 days! $1600 is not bad for Power FC and hand controller! Spoolup - Im very interested in your GTR injectors and have sent an email yo you asking you a few questions!

Hey Wanted to buy: Power FC (for RB20DET) *yes i know there hard to get! * and some injectors (GTR 440cc, RX7's, or any 550cc+) Just something that suits HKS 2530 Thanks!!! Luke

Go the 32!!!

PM sent...im very interested

This is the Trust bar on my R32, even in white!

Mine blew also, I put some of that flexi EL wire in it...2 runs top and bottom...clear silicon to put it all back together then hooked it up to the rear tail lights so it turns on when ya put the lights on As promised the picture is attached!!!!

I think the search button will be your answer!

Yeah thanks guys! I accually just went and done it shortly after posting. Thanks for all your help the job was simple and looks way cooler now Thanks

Hey guys, Just wondering if there is anything i need to know before i start fitting my new struts to my R32 GTST? Thanks!

I washed my car the other day and took it to work and back...when i got home i noticed a huge amount of exhurst splatter....and i didnt drive hard or anything Just wondering what is causing it, Can anyone help out? Thanks

Stock a R32 GTST is 10psi - Mine was 10.5 with 3 inch exhurst when i got it dyno'd and a R33 GTST is 7psi

I got playing this game again, this time the xbox version and finnally reached my goal 100,000 drift with a 110,000 point drift on drift track 6!...none of this easy drift track 1&2 crap! Go the RX7!!!

yeah ive used the 1/4 mile feture on mine...its not the most accurate. But gives you a (aroundabout) sort of a reading A good turbo timer but really all a turbo timer should really do is keep the engine running for a set amount of time, if i brought another one id get a basic one & save my money and get one of those apexi Speed metre thingys

damn it...i wish it was a white R32 GTR wing...cos im looking for one of those good luck with the sale

will it fit a R32 GTST being cat back and all?