richie$$$rich

Update Piston and Rods SOLD Head and ECU SOLD Oil Pump and crank colla SOLD I have a re gound crank for sale now. $250

Selling them together , as they are PRESSED to the pins on the pistons.

Its a "I've had a GUT full sale" 26/30 Parts priced to go! This is posted on other web sites. first in best dressed. Hello everyone, As it states above. I'm F**Kn over this engine setup. All parts priced togo. New project is in the pipe line. *GT42/T51r SPL rear 1200HP+ turbo INC MANIFOLD INC Wastegate INC screamer pipe also INC dump pipe $2800.00 the lot. * RB26 Complete head INC Cam Gears,clear cam cover, 6 throttles and ARP head bolts. Just been reco'd by Robbie abbott engines and had 10 Hours of porting done. Priced to go $1800.00 (RECO & PORTING BILL WAS $1500) *800cc Denso Injectors INC Rail (Dyno use only) $600.00 *Argo Rods (800hp+) and wisco forgies (8.5:1) $800.00 (Used F**k all) *Haltech E11v2 INC wiring $1200.00 *2 Speed Powerglide with 3500convertor and Transbreak Built to hold 1200HP Plus B&M shifter INC tail shaft $3000.00 I've got other parts like RAJAB water pump pully ($100) , ROMAC harmonic balancer ($250) , Brand new RB30 Crank colla ($50) * 3.5in EX system. with no cat and one muffler. ($300) All parts are priced to get them the F**k out of my life! Going V8 turbo PM me or call on 0418 787 314 on the Gold Coast. Postage can be arranged at buyers expense.

Its a "I've had a GUT full sale" 26/30 Parts priced to go! Hello everyone, As it states above. I'm F**Kn over this engine setup. All parts priced togo. New project is in the pipe line. This add is posted on other web sites. First in best dressed! *GT42/T51r SPL rear 1200HP+ turbo INC MANIFOLD INC Wastegate INC screamer pipe also INC dump pipe $2800.00 the lot. * RB26 Complete head INC Cam Gears,clear cam cover, 6 throttles and ARP head bolts. Just been reco'd by Robbie abbott engines and had 10 Hours of porting done. Priced to go $1800.00 (RECO & PORTING BILL WAS $1500) *800cc Denso Injectors INC Rail (Dyno use only) $600.00 *Argo Rods (800hp+) and wisco forgies (8.5:1) $800.00 (Used F**k all) *Haltech E11v2 INC wiring $1200.00 *2 Speed Powerglide with 3500convertor and Transbreak Built to hold 1200HP Plus B&M shifter INC tail shaft $3000.00 I've got other parts like RAJAB water pump pully ($100) , ROMAC harmonic balancer ($250) , Brand new RB30 Crank colla ($50) * 3.5in EX system. with no cat and one muffler. ($300) All parts are priced to get them the F**k out of my life! Going V8 turbo PM me or call on 0418 787 314

Hello all , I have for sale my rb26/30 setup. The motor has a knock in number 3 (New bearings needed) Motor has the following inc..... RB26/30 Rb30 block 20tho over sized , A8 turbo block ARGO I-Beam Rods Wisco forgies ARP Main Bearing bolts ARP Head Bolts RB26 Head , 10 Hours of porting (JUST DONE + Full RECO) STD CAMS ADJ Cam gears RB26 STD intake manifold (6 Throttles ETC.) *Note injectors and rail are not for sale. Due to them going on my GTR. This setup has made 640HP behind a glide and a HKS T51r SPL BB. Easy 10 / 9 second motor behind the right tranny and driver! We think the motor has spung a bearing. Mainly coz I havent started my motor for about a year. Also i am now doing a Ls2 Turbo setup now. Motor has to go Price $5500 HAS TO GO!! so make a offer!!! PM me or call on 0418 787 314 I'm located on the Gold Coast.

Hello all , I have for sale my rb26/30 setup. The motor has a knock in number 3 (New bearings needed) Motor has the following inc..... RB26/30 Rb30 block 20tho over sized , A8 turbo block ARGO I-Beam Rods Wisco forgies ARP Main Bearing bolts ARP Head Bolts RB26 Head , 10 Hours of porting (JUST DONE + Full RECO) STD CAMS ADJ Cam gears RB26 STD intake manifold (6 Throttles ETC.) *Note injectors and rail are not for sale. Due to them going on my GTR. This setup has made 640HP behind a glide and a HKS T51r SPL BB. Easy 10 / 9 second motor behind the right tranny and driver! We think the motor has spung a bearing. Mainly coz I havent started my motor for about a year. Also i am now doing a Ls2 Turbo setup now. Motor has to go Price $5500 ONO, HAS TO GO!! PM me or call on 0418 787 314 I'm located on the Gold Coast.

anyone?

DoH!!! wish my GTR was running , waiting on the parts other wise I would have been there!! oh well next time.

what do you want to pay for one??

I have now changed my turbo setup on my R32 GTR to 2560's. I have for sale : * STD R32 GTR Turbo's inc all lines (Done 78k's) * STD R32 GTR Dump pipes * STD R32 GTR Centre pipe off the EXH. * STD R32 GTR bonnet in midnight purple (Little scratches , no dents) * STD R32 GTR ECU with Mines chip (Will run 600cc injectors) I'm open to offers on all these parts. PM me or call on 0405 601 612 Located on the Gold Coast. Richie.

The Key way wasn't holding on my setup. Also if you spent 18,000 on a long motor , some one is and has taken you for a ride.

too much............ done 3 RB builds. using the same bottom end. changed to 3 different turbo's and SOHC to DOHC........ Dont want to know really. LOL

^^^^ On the money!!!!!!^^^^^^^

KKR are good for the money. Get a price on it and I will see if I can better it for you INC postage. PM me .

King's cross gay. LOL

I have had hours and hours of dyno tuning on a mircotech. Cold start I had to sit on the starter for like 10seconds to get it started. (Haltech starts right away) I would pull up at lights and the car would stall. (Haltech running idle has had zero problems.) Haltech is so much better for GTR's (Due to 6 throttles). All was turned by the same tuner.

This my VL that has a 26/30 setup (I know VL on a skyline forum, but I also own a R32 GTR) here is a you tube link of it on the dyno.

sell the mircotech , I have on luck with them with the 6 throttle setup. Haltech e11x v2 is the best thing i have done. cold start zero problems , also idle

If you need any help with 25/30 or 26/30 setup's please feel free to PM. I have done RB30 SOHC / RB26/30 builds. what turbos make what etc.........

A friend of mine has a 25/30 setup. Spec's are as follows, STD Series 2 Block STD rods and pistons (Motor has not been apart since god know's when) RB25 head STD Head ports STD intake manifold set of small cams STD rb25 EX manifold GT3540 0.86 rear Haltech e11v2 044 pump STD R33 box H/D clutch made 480HP on 20PSI pump fuel Daily drive for the last 2 years @ 20psi

wisco's 8.5.1 Stock GTR Head gasket , stock head , cams and intake manifold 520hp on 20 PSI (street @ 8500rpm) , 637hp on 32psi C16 (race @ 9500rpm) see for yourself. (I know its a VL not a skyline , but I also have a R32 GTR) Behind a 2 speed power glide.

One thing to keep in mind is , how much you want to rev the motor. I would look into a H/balancer if you want to spin it over 7000rpm. I had a stock RB30 (new) one on my setup. Once it got over 7500+rpm is was spinning on the the crank. I went a rolla master one and its hitting 9500rpm all day!!!! Keep it in mind..

I have a 26/30 setup in my VL making 518on pump @ 20psi and 637HP on C16 at 32psi behind a 2 speed glide. The Head has nothing done to it at all, Cams , ports , springs and even head gasket (Yes it is holding 32psi on STD head gasket) are all STD GTR. So , by the time you spend all this money on a 25 head , you may as well go a 26 head.

LOL , Funny thing is that the Ls1 has 6 bolt mains, Tuff as motor. very light as well!!! Got my vote!!!

Cool, Thanks