toy515

hey guys ive just got some custom front pipes made up but they didnt put a flexi joiner in? ive heard it leans out number 6 if it hasnt got the joiner or is that a load of crap? cheers

hey guys im after some paint codes does anyone know of a paint code close to the following top secret gold tomei blue brembo gold cheers

hey guys ive got a s15 with rb conversion and im having troubles getting my sway bar to clear the sump, the sump has a cut out for the sway bar but i have a whiteline one and it rubs on the sump ive heard a ceffy sway bay fits can anyone confirm it or how can i space my whiteline one? cheers

sabre gauge sold

hks gtss turbos would be ideal get some bigger injectors and the rb25 series one i think (green label) will be fine someone correct me if im wrong

hey guys ive got hks adjustable actuators on my gtss turbos i was told they are set at 14 psi but my e boost is set to 16 psi and im having troubles hitting 16 psi would it be because my actuators are set to 14psi, if so how do i adjust them? cheers

hey guys i have just bought a power fc PFC GTR33L 020- 1133 for my r32 rb26 just wondering do i need to change anything on the r32 gtr loom for the r33 gtr power fc to work, im 80% sure that there the same but just double checking cheers

hey guys i have sabre oil pressure and oil temp guages the smoky lense series, i was wondering will the oil pressure gauge read right if i plug it into the standard oil pressure sender on a rb26 also does a 26 have a oil temp sender and same thing will it read right if i plug it into the standard one? cheers

r32 gtr injectors $250 r32 gtr air flow metres $180 rb26 flywheel $50 r32 rb26 ecu $100 sabre smokey gauge air/fuel 60mm brand new only fitted to s15 air con vent never been wired up $80 brand new genuine nissan headgasket $50 located on the gold coast will post at buyers exspense brad 0421511710

hey guys im after a power fc for r32 r33 gtr second hand or new or even d jetro cheers

hey guys im looking for some injectors for my rb26 600cc or bigger and 2 green label rb25 air flow metres cheers

thanks mate cleaned them yesterday started it up this morning it was fine cheers

nah i havnt will that cause it when its cold? do i use that contact cleaner?

hey guys my rb26 is missing really bad when cold, when you put your foot down in any gear it starts missing really bad and if you go to take off with revs under 4 it stalls and then wont start with black smoke out the exhuast but after driving for 10 mins its fine but still a really slight miss on idle when hot. i cant figure out what it could be? maybe the igniter module? im using splitfire coilpacks bcpr7es plugs gaped to .8 thanks

hey guys just had a power run at gavin woods auto tech it made 271 rwhp on 14 psi hks gtss turbos walbro fuel pump standard ecu, injectors and afm front mount should it be putting out more or is that normal i will post the dyno sheet up later tonight

hey iv got a rb26 and i think i have a boost leak, iv got hks gtss turbos and a turbo smart vport type 3 bov, is there any way my bov could be leaking. i was runing 18 psi but it will only hit full boost when its still a little cold, but after driving for a while the boost is all over the place and really hard to hit full boost, and the car feels real slow at high revs??

i was told it has to be pressure only not vacumm?

the engine is in an s15 i havnt got that black box? is there anywhere under the plenum i can plum into?

anyone?

hey guys just wondering where is the best place to put the pressure source line on a rb26 i know sr20s plumb into the turbo side of the intercooler piping im just unsure about the best place on a 26 cheers

hey guys just wondering what kinda power the standard rb26 injectors and airflow metres will handle im looking for 400rwhp i currently have hks gtss and a forged engine. can i use rb25 afms if so what needs to be done to get them to work on the 26 and what cc injectors would i need? cheers

hey guys i have a rb26 in my s15 its been recently rebuilt, i was driving it for a week or 2 and it now sounds like a wrx i was running bcpr6es gaped to .8 i took them out cleaned them put them back in and it was fine then took it for a drive and it started to do it again so i bought new plugs the bcpr7es gaped to .8 and its still doing it i done a compression test and its roughly 140 in all what could it be? exhuast leak? head gasket? i have no idea cheers

hey very easy conversion use your 25 engine mounts and brackets 25 gearbox 25 sump with modified pick up and to hold more oil send your loom to kev rowley nissan guru i sent my 26 loom to him to fit into a s15 everything works you send him both looms and hell send it back and you plug it in. you will have a problem with the temp gauge use the 25 water temp sender on the rb26 for cooler piping i just bought a univrsal kit from ebay and just cut it to fit looks fine. pm if you want kevs number

no your wrong i do need a breather because im not using the 2 lines that go from the covers to the plenum and the intake side, so theres no way for the engine to breath therefore i need a breather, but im not sure where the best place to put it.

hey guys just wondering whats the best way to set my greddy catch can up on my rb26 i have 2 lines going from covers to catch can and the other 2 outlet on the covers our blocked up. and catch has no breather and i was wondering where the best place to put one? and do i need 2 breathers or one? cheers