Craved

think it said ebay http://cgi.ebay.com.au/Nissan-Skyline-R33-...id=p3286.c0.m14

got a good res shot of the base through the chip?? depending on what is under the black paint you could use paint stripper , but without being able to see its hard to suggest that. I'm working on some 1/2pce work meisters and under the black paint is the cast alloy finish which is actually quite neat looking, but any raw alloy will oxidise in the elements.

Tim, you definately need argon for TIG welding alloy and stainless - pita have 2 bottles but you sorta need to

removing the casting marks makes a big difference in those last calipers

i use my skyline garnish as a 3rd brake light, never had any issues in the 6 or so years and numerous defects. Find a nice flush mounting LED light - like the R34 ones in teh boot, then get the wing modified. or DIY If you dont want to try it, find me a nice flush one and i'll try it haha have one of these awaiting install on one of my 33's

how much room is under the seat? rear of seat to floor and front of seat to the front mounting ridge?

would also depend if the rack was changed to a non PS rack, as they are designed differently i believe i have bought these spacers, havent fitted them yet though

would also depend if the rack was changed to a non PS rack, as they are designed differently i believe i have bought these spacers, havent fitted them yet though

Looks like we need to change suppliers if you got it for that price Ben. what are you going to cut it with? best thing for 4/5 inch grinders are alloy blades that look like wood blades - or you can use a regular wood circular saw to cut it out. Goodluck, be interesting to hear your results after its completed

buy carbon build mould make new FG replicas Profit ?? - oh and you can replace them if you rub some panels

just got to find these clean ones - you want to look into removing the GTR emblem from them? with the application process im going to have to use, taping them off wont be a clean option.

Pete - i'll take the 2 pairs of rims and the GTR seat - can pickup as i dont think you are too far from my shop let me know if i havent been beaten to anything and when you are free

Well the silver Comp coatings is using is good for 1600oF - they should know well enough that they can use a special primer to raise that threshhold up to 2000oF to match the blacks rating. couple of hints : -clean hands and no oil on the parts before using it for the first time will ensure maximum shine -you can repolish the chrome coating with metal polish, just remember to use methylated spirits to clean off the polish residue before starting the car up again I use the same products that they are listed as a distributer for - Leon if you want some extra info chat me

spotted smasha on epping road this arvo lol would have responded but i was "distracted"

320 front 340 rear good luck with anything other than the stock kit

gtst centres are PA6+PPE plastic - but they hold up fine under 180 degree coating temps One i tested was filthy with old high temp matt black paint - once i find the clean pair that i didnt paint i'll start working out the coating process - thing to overcome with plastic is gas release from the plastic as the coating flows and links on the part

Interior wiring loom . from Dash to boot including ECCS relays in passenger kick area ??

"It is with genuine regret that due to exceptionally high demand for the Autoglym Trial offer we have had to temporarily suspend the registration process. We thank the thousands of people that have expressed an interest. For those of you who have registered in accordance with the terms of the offer, your samples will be distributed to you in the near future. We greatly appreciate your interest and hope to reopen the registration process in the near future. Thank you for your interest. "

You are right, if you get the primer gun to "spit" and have it start drying before it hits the part you can get a textured finish, then paint over it in your required colour. Custom mixed powders are expensive to get formulated - its not like paint where you can simply mix 5 parts black 2 parts purple etc etc formulation of powder colours requires it to start from the beginning with fresh resins, colours and bonding processes. couple of attached internet pics from one of my suppliers

yep, seats mount hole on the tunnel should be fine

i'll take em for the $80

just gotta find my caps, think i know where they are, try it out tomorrow.

check that the little breather holes are clear also, should have little rubber L things on them

paint isnt really going to affect coolers too much, unless your cooler is already struggling to cool the charge air.

Replacing the buckles bolt with the eye bolt wont resolve that issue for you? and the shoulder pads should really go to the child restraint mounts as the angle of the belt should be as close to horizontal as possible.