Jump to content
SAU Community

Craved

Members
 View Profile  See their activity

  • Posts

    17,563

  • Joined

  • Last visited

  • Feedback

    100%

 Content Type 

Everything posted by Craved

  1. Craved
    Doesnt look like there is any scratches along with that dent, if that is the case then call a few mobile paintless dent removers - they will be able to get that back to looking perfect, without the need to spray the whole quarter and door etc to blen d it in, prob be cheaper too try the yellow pages for these guys, as i cant suggest anyone in Melb
  2. Craved
    its amazing how much money people charge for simply thinking of something first, and not doing more than spending the $30 to get the plates made
  3. Craved
    was changing some upper control arms, so while the wheel was off i bolted the unit on to get a feel for how it worked, fits good and will do the job. there will be alot of adjusting involved since the wheel arches arent a perfect circle also need to remove the calipers to get the unit to do a full sweep. heres a pic - not bad for $145
  4. Craved
    well a matt black doesnt have gloss, so its hard to say
  5. Craved
    TommO - fibreglass is fine, until you hit something. even so - i wore 2 holes in the bottom of my bar when i had it stupid low for a couple of weeks, no cracking, just holes in it keep your gen one, and if cheap enough grab a FPR one for everyday driving
  6. Craved
    Buy it strip it new rings - new gasket - new bearings if need be no more wondering, and it will be better than when you bought it
  7. Craved
    your link no worky
  8. Craved
    didnt the guage come with an info sheet?
  9. Craved
    you can get 6" sisal mops .. so as long as you can get an arbor/taper for the grinder your looking at, then you should be fine ..
  10. Craved
    yeah if its got cracks in it, you need to get rid of them first
  11. Craved
    LOL thanks for that James.... damn toyota drivers
  12. Craved
    oil thermos work on tha basis of when not up to temp, they bypass the cooler. So it it got stuck closed - it would just mean the oil cooler isnt being used stuck open means longer warm ups like you didnt have the thermostat. so i cant see how it could damage anything if in the odd case it did malfunction.
  13. Craved
    they dont look to be designed for bolting on, so molding them to the panel looks like a must anyway. tp1gts2 - where abouts did you get them and how much? since they are universal i am keen to check them out. dont forget that you can always trim them down so they dont come out so far
  14. Craved
    would be alright if you did a retrofit of the honda rear section and grafted into the front half of the standard r32 headlight. well if it was a true projector setup, which i doubt at that year model - but it would fill that gap
  15. Craved
    have a look at the "nissan paint codes" sticky at the top of this section
  16. Craved
    computers? AFAIK the stereos will always turn off for second, but if the dash lights go off, then you havent got enough power .. battery or jump start time
  17. Craved
    +1 on that if all lights including the wing light arent working, it will be a fuse or the brake pedal switch
  18. Craved
    lol thats lazy - or a major oversight
  19. Craved
    bent end needle nose plyers - the long ones (foot long)
  20. Craved
    find out how much he is paying for a std bar for you, as more than likely he will need to paint it anyway, you might be able to throw in a couple hundred extra to do the 400r instead of the std bar
  21. Craved
    That kit picture listed there is from UAS who get their stuff from Motorsport connections in Seven hills - http://www.mscn.com.au/Scripts/default.asp - i bought pretty much what was in that kit, but substituted the Braided line for their Pushlock series of hose and fittings. GTR1993 - 99% sure the rb26 runs a heat exchanger type oil cooler the same as the rb25's
  22. Craved
    dont need to reprime it if you arent fixing anything, just a wet 400 sand, then a quick wet 800 sand then your ready to clean it and paint it
  23. Craved
    Defying your name sake with all that effort Warwick looks relaly good though no worries - r33cruiser - its what the fab section is for looks good
  24. Craved
    PRIMER - always use a primer under paint
  25. Craved
    Well i just picked mine up normal chinese tool, but still sturdy and looks like it will do the job pretty well. hopefully i'll find some time soon to test it out ended up getting it for $145 from burson's in penrith
×
×
  • Create New...