The Bogan

I bet those Invidia are 100 cell which are "catalytic converter psychological" https://racecraftaus.com/products/catalytic-converter-universal-400cpsi-euro5?variant=39439772680305

This is where my area of "want" really is

I've started collecting old steel Mack truck rims for outside heating, so far I "rescued" 2 from scrap bins at work, I need 3 though, although you could use a car rim on the bottom, but 3 truck rims make it look much more "meaty" We have a few pot belly's at work made out of them, one is as good as the day it was built over 30 years ago, even after many occasions of packing it full of hardwood and having it glowing cherry red with a 3 foot flame shooting out the chimney, it is a great warm thing to look at from 12 foot away drinking brewskies with the guys We found they do need a good stand off (read: metal frame work fence to negate life threatening injuries from falling onto it in a drunken state) and a good sized foundation under them when glowing cherry red, grass doesn't stand a chance, or any type painted surface, roof, building, lawn furniture, or even people adding in more timber, they will melt or catch on fire if to close for to long when it is turned up to 11ty We ended up making a mesh spark arrestor for the chimney as well as the "powers that be" claimed it was a fire hazard as it shot embers high into to sky Not this but like this (from googles) > but with another Mack rim on the bottom with a gate so you can clean out the ashes, nails, bolts, food scraps and molten beer cans that had the misfortune of being dropped into its gasping maw, ours have a swinging top plate to allow anything smaller than about 200mm round and 500mm long to be fed into it Disclaimer: out door use only 2 of them bolted together with some mesh also make great out door open fire pits My latest acquisition, brand new rim :~) >

The day was great, after warming up with coffee and a catch up with her and her boyfriend for a few hours, we hit the local gym for an hour, then went to the Para for lunch, but, early morning, doing $1.10 on the hwy, that was not so nice, having your hands go numb is problematic on a bike if any braking is involved I have been looking at possibly buying something down that way, I believe I'm going to need to "hardened the fark up" in the future if I still want to ride the bike when it is stupid cold like it gets down there The warmer climate of the South Coast is fighting hard for my money though

Rode the Bogan bike to Goulburn to visit the daughter this morning. I nearly froze to death, even with lots of layers Note to self: drive the car to Goulburn when it's cold you idiot

An issue I had was the Tomei pump I was using, it was sending so much oil to the head at high RPM that the head, even with smaller restictors, and enlarged oil drains in the head and block, and a head return line/vent installed to the sump couldn't keep up with the oil being sent to the head, the fix was changing the spring on the bypass of the oil pump or.........something.....UNIGROUP ended up sorting out the issue, plus a big AOS/baffled catch can with a one way valve that returned to the sump helped High RPM and a high volume oil pressure is problematic in a RB This was over 10 years ago though, I'm sure this has been well sorted by now with all the high reving RB monsters still using a stock location high volume oil pump Or, go dry sump and fix that dilemma, but then your oil pressure relys on a belt Or, spin a LS with a high volume, high pressure oil pump, on a stock but boosted long block, and not have a issue 🤪

My daughter just purchased a new Kia Cerento GT, "apparently" going of reviews it has basically the same driveline as the i30 N line premium, apart from the transmission options Both had typically warranty IIRC She went looking at both, she said they were both similar inside, but she liked the inside of the Kia better and the Kia had a little more room inside She ended up going the Kia Cerento GT because it ended up a few grand cheaper than the i30 N line premium She has to wait for it though as she wanted some premium pearly white paint In saying that, even with the extra costs for the paint and other accessories she ticked the box for, it was still a few grand cheaper How it holds up long term wise compared to the Hyundai is something that will have to wait and see They way I see it they are both great cars for girls.....😋😘

It looks real nice in the picture, and still has the stock rims which is a bonus, looks like it has been loved

How is the potential rust?

Took off the car builders underbonnet mat, was surprisingly easy, although I did sit the car in the sun to get some warmth on the bonnet. Basically pealed it off slowly, the glue was still really sticky and took some effort, but, going slowly it only left a little glue behind, then a little wax and grease remover and "Voila", all ready for the paint shop to do their "chop chop paint" I'll hit it with some more wax and grease remover the day before I "send it" as I like to clean off all wax and stuff prior to sending anything to a paint shop Before After It will get some more of the car builders stuff one the "chop chop paint" is done to "protect the guilty" The new drive shafts arrived today, as well as some wrinkle paint that I got from Supercheap, they are next on the agenda Apparently wrinkle paint is in high demand, finding some was time consuming, and there was no red anywhere in NSW, so I made an executive decision, after some staring at the rocker covers hidden under the coil packs, to not be so "lairy" and just go black to match the blower and the rest of the black stuff under the bonnet

Throw some picks and wheel specs up mate

Put high flow cats back in if it is a street car, you won't loss many HP with "good" and "big" 400 cell high flow cats, unless all you care about is circle jerk dyno sheets, and need that extra 5-10hp for the insta reps. Plus Captain Planet will not come looking for you to kick you in the balls.

Got the car some new half shafts from Fleabay The old original CV's finally decided to start knocking For the 21 year old original half shafts and their CV joints to last as long as they did is amazing I got the whole half shaft/CV assembly because it turns it into a 1 beer job

I find eucalyptus oil good for glue residue Plus it clears the sinuses and I think it leaves a nice smell.....eucalyptus.....leaves.......nice

Idle hands, and me, are the devils plaything Modified bonnet version 4(ish) VN group A bonnet "buldge" chop fit to VX, I blue tacked it onto the bonnet in the garage for a while looking at it, it does look 100x better than the VK reverse cowl, and is alot less of a "heat signature" Why you may ask.....or maybe not........meh, well.......clearance Clarence, the Tuff Mounts lowered engine mounts are finally breaking my balls (engine/blower/thermal spacers) doesn't fit under the standard bonnet without them), I thought I could come to live with the added NVH from them, and 50% of the time they don't really bother me, but, during long cruises up and down the coast, which I do alot of, the NVH and all the rattles have finally done my head in Once the bonnet is opened up under the buldge this will allow plenty of room to go back to standard height rubber mounts I have already got my local paint and panel shop to have a look, I asked them to get another bonnet for fitting the buldge to make things easier for me, I cannot be farked to remove the under bonnet mat, plus it will mean less time being without the car, I told them there's no rush, so they can get to it whenever they have some free time They are going to call me when they have found a good bonnet to use and to head in to take some measurements for exactly where it needs to be Their paint matching is the best I've seen, and I've used them a few times over the years with cars and bikes

New 80w90 mineral blood in the true track, all ready for some more use and abuse The old diff oil was black as expected but there was zero glitter in the old oil or on the plug Just like a bought one

I would change the oil for sure, cheap insurance Oil will breakdown due to fuel and water contamination As for the plugs, I would if they are coppers, or just pull them and inspect and check the gap I would also change the brake fluid and coolant if it is water-cooled Cars and bikes, don't like sitting around doing nothing Preventative maintenance is cheap, fixing broken stuff not so much

Threads needs more LS

He sounds like the classic old troll, asking questions, then we get dumber and dumber stuff the more he posts

From a guy who wants to put little tyres on a big rim?

Yeah nah mate, automatics are great for around town.

The daughter has purchased a new Kia Cerento GT hatch, delivery is in August, sooooo, in August I am getting back the little Yaris YRS for a daily hack, it is the "big block" 1.5 ltr engine with the 4 speed auto, so you know it is.......slow as 10 slow things. But it is a clean and well maintained little thing, that uses alot less fuel than both the Dunnydoore and the Harley for local trips. Plus, leaving it parked at the local shopping centre will be alot less stressful, rain, hail or shine. Yes, I am already looking for some 2nd hand rims and some lowered coils for it.

https://www.woolworths.com.au/shop/productdetails/1074172863/instahut-gazebo-pop-up-marquee-3x4-5-tent-gazebos or for the style conscious

Big rims for small tyres, especially the fronts, what are they going on? What are the wheel specs? I run a 235 on a 8.5" rim and it looks sort of stretched

For the street I personally cannot go past the RS4's I find they have enough size options for street rims If your tyre size isn't available in AU, I have found tire rack in the US quick and great value, even when you add in shipping, "depending on the exchange rate", I've imported tyres from them a few times when I haven'tbeen able to get what I want local, both personally and using a freight forwarding service https://m.tirerack.com/tires/Sizes.jsp?tireMake=Hankook&tireModel=Ventus+R-S4 Are RS4 a motorsport tyre, nope, from my limited experience they are average at best on the track, hell I found Toyo R888R much better in the dry than the RS4, but without the longevity, being a much softer 100 TW, hell the R888R's may be perfect for a car that only street drives for cruises and stuff on sunny Sundays, they are slightly more expensive than a RS4, but not really that much that it is painful IMO But for spirited street driving in the dry, and to be able to handle wet conditions fairly well, if you don't push it to hard hard, I believe RS4's are great value for money for cruising around on eating up the miles, and they last really well for a 200 TW A smart man once told me "if you want to track your daily you need to have at least 2 sets of rims, 1 set for the street with quality street tyres, and 1 set for the track with proper semi slicks/radials"