yogi000

Hey Just curious what open wheeling is and what gets done when u shimm the diff??? Thanks

you the guy who collected the gutter or something?

What model are the cams from???

I got the english manual here, i also got mine from japan too and the diagram of the ecu in the manual is wrong or it could be havent calibrated the revs and speed yet. Red - 12 volt constant Green - 12 Volt Ignition Blue - 12 vold accessory Gray - Handnbrake Brown - RPM Blue - Speed

Looking for the peice that goes around an r32 couple rear windows. PM me.

I got the same one, and if you used the diagram in the manual to hook it up to the ECU, its wrong. The manual shows the wrong pins to connect the Speed & Revs, thats from personal experience.

what type of turbo timer is it???

Looks like a microwave sensor for your alarm, does that little light on it flash?

A plumback BOV isnt illegal i think, but the atmo BOV's are illegal. Is that right?

I recently changed mine, and i was able to find a NSK cam belt idiler bearing but had to buy the genuine nissan tensioner pulley. Cost me $195 for both.

Hey bbenny nice results dude! Just wondering was timing set to 10AD because of the cam gears or because your running a fair bit of boost? Good work!

how much lower are they compared to stock?

my r32 has a few k's on it, when i used to use fully synthetic oils my oil pressure would sit lower than 3 on the stock gauge........i've now changed to Penrite HPR 40 (the old pentrite turbo stuff) which is i think 30W-70 and i've never looked back. Oil pressure is now on or above 4 while driving. Only one thing, it need a good warm up in winter. My 2c

Would cam gears on a rb20det with an 3" exhaust give it some more poke down low?

Pm'd u

Cam Belt Timing Cover with Bolts R32 gts-t The 2 peice set. Thanks [email protected] or pm

Hey Guys, Why do you need too change the gauges??? do they have to be mechanical ones or the GTR ones just wont work on a gts-t?

I wanna put a FMIC on my car but i dont want to cut the fins in the front bar so you have clear view of the intercooler, i want it to be covered up if possible. Anyone installed a FMIC without cuttin the fins???

how old is it?? and any photos???

Hey, I just installed a temporary boost gauge on my r32 gtst which is absolutely stock, the only mod being a redline panel filter. Basically these are my results; Full throttle in 3nd spikes to 11psi holds 10 psi till about 5300rpm and drops back to 8psi, pretty much got the same result through 2-3-4 gears Is this normal? only reason i ask is because everyone i speak to reakons all the skylines (r32,r33) only run 7psi but its holding 10psi for a pretty long time, not just spiking upto 10. Your feedback would be appreciated P.S done on a 15 degree night.

I would say, if your belt is on right, marks match up, all hoses back in the right spot (eg. Crank Reciculation Thingi) and CAS on the right mark(by eye), reset the ecu and try starting it and holding the idle up for a couple of mins and see if it help but other than that i'm stumped. dunno if that is any good tho

I'm interested, does it have any cracks, leaks or dents??? how much for postage to sydney?

this is abit off topic, how do you become a member of the SAU NSW?

you got pm.

Had it on my old car 3 point immobilser with the black wiring and shit. 2 stage shock sensors ultrasonic interior sensors (people say these aint as good as microwave sensors??) back up battery siren + internal screamer (makes ya ears sore) window lifts keyless entry pretty good alarms didnt have much problem with it, if you gonna put a turbo timer in your car just make sure its in before the alarm because it makes things easier. It can be done later on but u need to get brant to change something on the alarm which takes all of 2 minutes and $30.