amosite

5 Core Apexi intercooler. 610x 240x 140mm. Suit 600 hp up to 1200hp. Just been chemically cleaned and painted. Minimal bent fins as per pic's. $1599 SOLD Nismo N1's. 0.48 exhaust with 0.6 front, these have not been used since rebuild and come with full garrett warranty. Part number 14411-06U00 $3300 R33 GTR wheels, good condition $1700 R32 and R33 4'' exhaust.The front pipes are 63mm and have a smooth entry into the flange (flared out) to reduce turbulence with a 2'' long slip joint incorporated to maintain gasket life. From here the primary pipes are extra long to increase scavenging effect of the exhaust which results in excellent drivability and strong mid range performance. From here they collect into a 4'' system with hand made bends. The exhuast is slip jointed with retaining springs to ensure laminar flow. You would be suprised how much power is robbed by flanges not meeting up correctly. The slip joints also act as a flex joint as the traditional double layer flex joints can reduce flow. $1299 550cc HKS injectors $600 good condition. Will support around 650 fly wheel hp R33 HKS Hyper max coil overs, excellent condition, no leaks or damage, excellent condition $1399 R32 and R33 Billet flywheel, Brand new. This will improve throttle responce and the engine will rev to redline quicker. (this has been made to accept RB20, 25 and 26 clutch covers) If you need clarification of what this does feel free to do a search or contact me. $499 Recaro Seat, drivers side only. No rips or burns $450 R32 Koni Adjustable Shocks with adjustable spring platforms (10-40mm lower) suit stock or aftermarket springs $699 Good condition, no leaks or damage I am located in Sydney but I can ship anywhere. Pm/email me with your email and I will forward pic's

I have had many differnt high flows on various cars and at one stage I ran a T04B compressor on a stock turbine with a 5 deg back cut. This car was awsome! This was the biggest sleeper I had with a stock exhaust even (modified internals) Point being is that you would have to have a very big mismatch and I doubt any would cause light throttle surging. The surging at light throttle doesnt seem right I would get the cars AFR and timing checked. But before that, what I would check is that the 02 sensor is connected and all wires are in tact. If not it will do this sort of thing as well as getting shit fuel consumtion. I would also check that all the pipes from the AFM to the turbo are properly sealed and all hose clamps are tight. An induced air leak would cause the car to have inconsistent air flow voltage signals which would cause surging. If you removed and fitted the turbo yourself, 90% of the time people have this type of problem because the forget to connect the 02 sensor- Heck, I forgot to do it 2 months ago when turning the gf's car to stock (was in a rush working and in the dark) and wondered why it got less mileage.

Most people dont sigh when they get new suspension...

Anyone?

thanks Bl4cK32

Still available Will be sold to the first person who comes up with the cash Chef check your PM

and then...

sold, thanks all

0.9 bar. As far as I know they are only available in 0.8, 0.9 and 1.0 bar

I really though someone would have asked "if the turbo was included in that price" by now... This reduces boost creep and allows you to adjust boost pressures without bleed or EBC's

This is on hold and will probably be picked up tonight

****, $1900 for a legit ECU is a bargain! If you dont get $1900 on here, put it on ebay! It will sell for more then that!

The alloy bend in the pic $50

$299 shipped anywhere in Australia As per pic's attached Complete bolt on for GTST and GTT tfactory or bolt on turbo's

In excellent condition as you see in the pic Shipping interstate is $14

Bump, price drop $699

Sold to sebaz pending payment

Still got them. Slightly neg

I asked about an additional ECU update and sent a reply clarifying if his price was AUD or USD. Its been more then 3 months with no reply. I guess I will wait as I dont need the update that badly

How do you "put your contribution in" in a few easy steps?

Yes they will

bump

Sillme me again, forgot price $900

Silly me forgot pic's

R32 GTR (not GTS) Koni's. These have a 10mm lower spring seat with 3 different height settings with a C ring/clip. 30mm max drop from stock Can be used with stock or lowered springs. If you are using a lowerd spring set you can go lower due to the shorter spring. Adjustable damper via the top knob. Very comfortable shock. No oil leaks or damage, but it does have some minor surface rust as seen in the pic. Shipping interstate and overseas OK! Contact me for costs.