Weezy

SOLD

Can MMS photos.

FOR SALE R32 GTST 4 DOOR Engine RB30DET making 380rwkw @ 1.4bar (hub dyno) R32 RB25DE head + RB30 block (lowered around 30mm, <5000 kms) Full Trust T67-25G turbo kit CP forged pistons 8.2:1 Argo I-beam rods (ARP bolts) ACL Race series big end beaings ACL Race series main bearings ACL Metal head gasket ARP Headstuds HKS 264 x 8.5mm cams Performance Springs valve springs Adjustable cam gears GTR N1 oil pump (<2000kms) Crank collar fitted External head oil drain Head oil feed restrictors fitted Autronic SM4 ECU FMIC 3” exhaust, HKS super dragger muffler Oil cooler + relocation kit Blitz DSBC boost controller Cooler sprayer kit Bosch 044 1L surge tank 550cc injectors Driveline NPC Twin plate clutch (500km old) RB25 gearbox 1 piece tailshaft Kaaz 2-way diff Wheels: Work torennza F: 18x9.5 +19 225/40/18 (8mm slip on spacer up front) R: 18x9.5 +11 225/40/18 Great tread all round. Suspension / Brakes Bilstein coilovers UAS adjustable front upper control arms (<2000kms) Tien adj. castor rods Rack spacers HICAS removed D-project adjustable rear upper arms Whiteline camber kit in traction rod Ally subframe bushes Caliper extension brackets RDA 324mm slotted front rotors (<1000kms) Project Mu club racer pads (<1000kms) Body & Interior Genuine GTR front bar + N1 slots Genuine GTR bonnet Genuine GTR rear wing Genuine Type M side skirts This car is not for the faint hearted. Very power, very responsive, very agressive car. It will be registered when sold. I bought the car with majority of the work done, I do not have receipts for the work done but anyone that actually knows this car (previously owned by showza) will vouch for how much time and effort was put into it. I will sell without the wheels otherwise must go as is. Selling due to lost interest, work commitments etc etc Just generally life getting in the way and wanting to get into a low key daily. (IMG:http://i226.photobuc...et/GOPR0026.jpg) (IMG:http://i226.photobuc...et/GOPR0016.jpg) $13000 0433830055

Do you know if the GT-R mount will suit 32 GTST 4 Door?

Alright man, thanks very much for the detailed post. I'll give all the above a go bar the S14 rach and see how I go.

That is awesome man, Thanks for that.

Hey guys. I'll give you the run down. Its a good friends 21st coming up shortly, me and the boys are all getting our money together and were going to get him a set of wheels for his R33. It is a big HP street car, and he is nervous as shit about cop attention and wild offsets. We are getting him 18 x 9.5's but what I need to know, how higher offsets can I go on a 9.5" wheel both front and rear without it causing any issues with caliper clearance, or fouling out on the struts etc... We're getting him a set of varrstoens if that helps. I need this info asap, I can't just go and measure up his car, because this is a complete suprise. Cheers all, Weez.

Yes mate, I am well awear that coilovers will not assist with gaining more lock. What I meant by it, is get the car sitting right, get a proper wheel alignment, and start from there and work my way through the front end

I have a GTST 4dr. I already have tie rod end spacers and I felt I still wasn't getting the love I needed from the front end. Before I go too crazy, I'll get new coilovers base height adjustable and then try another wheel alignment see how I go.

Hey everyone... I've recently purchased a R32 4 door. After coming from a 180sx drift car and getting in the 32, with 380rwkw - I took it out for a drift prac, and the rear end was waaay loose and the front end was lacking the movement I was craving. I am a bit of a noob when it comes to skyline front ends. This is where YOU come in. What works, what doesn't. I am willing to take on any advice right now, because this skyline handles like a bucket as far as drifting is concerned. Kind regards, Wayne.

I got a blitz turbo timer sitting there with the better part of the wiring harness... 4pk of JD's n coke - 0433830055 Also looking at swapping my bilstein coilovers suit R32 with softer spring rates. I want base height adj stiffer coilies which would suit drift application better.

FS: Bilstein coilovers suit R32 Medium stiffness spring rates (cannot confirm exact spring rates) Great condition. Only selling due to wanting stiffer coilovers to suit my application (drift). $700. NEED THEM GONE.

Bilstein coilovers. They're out of my R32. Only reason for sale is they're too soft for my application which is drifting. They would be PERFECTLY suited to someone who wants to circuit race or street car. Unsure on spring rates, but as above, not stiff otherwise I'd keep them. No knocks, great to drive on. $700 0433830055

R32 GTS-T coilovers. Not too fussed on a specific brand but must be base height adj, camber if possible, and stiff as fk spring rates. Suit drift application. Regards, Weez.

I have a set of Bilstein coilovers, great condition. suit R32 GTS-T Unsure on spring rates but they are very suited to a circuit car/street car as they're way to soft for my application. Will swap for coilovers with agressive spring rates. $1000 otherwise. 0433830055

Buddy club P1 wheels x 4 Size: 17x9JJ +20 Tyres: 235/45 Kuhmo KU36 80% tread Condition: Perfect condition. Price: $1200 FIRM. No pictures but can MMS if you require. 0433830055 R33 GT-R Wheels x 4 Genuine (NOT COPIES) Size:17x9JJ +30 all round Tyres: 235/45 Sailums F: 100% R: 75% tread Price: $1,000 FIRM No pictures but can MMS if required -Weez.

You love arguing on the interwebz don't you lol. Oh to have as much spare time on my hands as you do

Personal opinion?! Its running that much camber for a reason...

Fknlol I havn't been on SAU in months and Dohmar is still adding his uneducated (but he thinks he is extremely educated) bullshit replys. Anywho nice to see nothing has changed. Mine:

:worship: :worship: :worship: :worship: FUUUUAHHHHKKKKKKK!!!!!!! Have my children please?! Rad f**king car dude

A mate of mine is hunting a R33 diff. Would prefure a 2-way or the like, but a standard diff to get him out of the sh!t for now will also be great. Contact myself, 0433830055

^ Looking pretty angry.

Blitz turbo timer for sale Full loom included $50 - and im as firm as pemelas titties!

get fuuuuuuucked