bri73y

you might be right there, they don't appear on Full Race's website anymore... My bad - sorry!

I believe so. Certainly RB26 was mentioned in discussion, nothing about a stroker. EFR also make a 6255, slightly smaller than the 6258. Now they'd be fairly responsive and still make good power!!

Bri73y still has them.... Mine have made 677hp so far on a dyno I know is low reading. My car lost near on 100hp when I first went to this dyno with no changes whatsoever. Going back on dyno before WTAC to push some more, tuner reckons there's another 50hp in it yet. So 700+hp on a low reading dyno for a pair of twins that spool like -5's is fairly decent. Don't know of any -5's making that kind of power. Full Race are tuning one at the moment, it's made 630hp @ 21psi. It's also tracking well over 700hp by the time the pump 30psi into it. It's running 280deg cams and has boost all in by 4400rpm. Not too shabby.

Depending on width, will you need some longer driveshafts also to take full advantage of these ??

Sorry, already sold and paid for.

It depends on what you currently have as to how much these will change -ve for you. They are 165mm in length, if your arms are longer than this then you'll pick up some.

I have my Speedbox designed/made front bar and splitter combo for sale. Speedbox made the front bar for the BSM GTR at WTAC a couple of years back. Proven to be very effective, and pretty good looking too! Both bar and splitter are fibreglass in construction. See pic for how it looked when last on the car, it's since been repainted to suit new colour scheme. I've decided to remake my front bar/splitter to suit the new Open rules for WTAC (bigger/lower etc) and have no need for this now. Absolutely nothing wrong with it and works very well. Has ducting underneath for brakes etc. Bar is worth over $400 and splitter approx. $1500. Looking for $1000. Pick up preferred but can send if required at purchasers expense. Currently in two pieces, needs to screwed/bolted together before fitting.

I bought these for the upper mounts and have no need for the LCA or Castor Rod. Left and Right. Brand new in box still. Looking for $500 delivered anywhere in Aus.

I bought these and trial fitted but have since changed direction with a custom uppers being made. They are brand new, never used. Cost just over $400 + postage. Looking for $300.

Gotcha! Keep up the good work, someone's gotta put these Evo's in their place!

Yep, they added it when they changed the minimum weight rules..... . . . . . . . . . just fkn with ya!

mmmmmm, did I read somewhere about a 90db noise limit..??

1295, any lighter and I'll wave the white flag now...

Thanks for your response.

Tried pm'ing you DJR81 I remember reading somewhere how you changed your upper links to the Nismo item and were happy with the geometry changes. What I don't remember was if you said what upper arm you use ?? I've used the UAS arms but they are ordinary for bump steer and geometry changes when under load. What do you recommend ?? thanks John

FWIW Mark Berry's R32 has the oil tank in the front also. Doesn't seem to slow him up any...

Do you still have the rocker covers ?

Do you still have these ??

Do you still have the rocker covers all did all bits go ?

Twin EFR's, 6258 or 6758? Interested to see how they perform relative to mine. Bloody nice build by the way.

bumpity out of my garage please...

Cam Gear SOLD!!!

Springs SOLD! Make me an offer on the other bits.....

bumpski!

PRICE DROP!!! Have a few parts leftover from a rebuild/upgrade to my R33 GTS-T. RB25 Factory Camshafts. These came out of my S2 Rb25, they look in really good nick. Don't ask me lift or duration as I have no idea, whatever factory specs are, these are - $100 Stainless Steel High-Mount Manifold and Wastegate. This setup supported over 300kw with a 3076 on it. No cracks, in reasonable condition. Only took off to go 6Boost - $150 I also have an X-Force dump pipe that used to bolt up to the 3076 if interested. Factory Radiator. Looks shitty but worked fine. Upgraded to PWR with integrated coolers - $50 Tomei IN Cam Gear. Bought in error, don't actually need it. Brand new in box - $150 This suits RB20/RB25/RB26 All prices are free postage Aust Wide. Thanks.