nismoCat

Ok, Well it still aint working, I took the ball and spring out of the bleed valve and nothing still, i also took the hose of the actuator and vented it to atmosphere and still nothing, i thought that should make it boost infinate??? No matter what i seem to do i can't seem to raise the boost?? Could my plenum (a hose or something??) be leaking?? Could the wastegate actuator be screwed? Next i am going to try putting the hose from the actuator before the throttle body, inbetween the cooler and the throttle body rather than after the throttle body on the plenum...........?? Please help me if you can! PPPLLLEEAASEE!!!!!!!!!!!!!!

So is anyone elses hose going to the plenum from the actuator?? I might block that and see if i can find somewhere to put on the cooler pipe, like shown above, Hey for all i know the bleed valve might be faulty?? If i knew a good mechanic i would take it too him, but i don't and and gettin ripped off any more! If the 2 stage thing was there i would just hook that back up at least i would have 7psi high in the rev range then, i'm sick of stock cars blowing me off!! Surely it can't be that to hard to up the boost now cmon!

I don't need to know how it is stock, i just need to know if i have the bleed valve in the right spot and if not where to put it, i had a look at the old rb20 turbo from the old motor and it has the hose coming straight of the actuator into the front housing of the turbo, is assume this is where you put a bleed valve on that yeah?? But on the 25 in the car now the hose runs from the actuator all the way over to the plenum, so we put the bleed valve on that hose and either gives no boost or just the 4-5 psi that we can't seem to get past???! And RandomHero83 i am located in northern sydney. Thanks heaps for everyones help so far.

As far as i know i am using it correctly, But the point is the only hose coming of the actuator goes to the plenum, no t-piece just one hose?? Do you think the the sphincter of the universe who did the conversion (which i won't name) has connected everything in the right place??? As you could imagine this is very frustrating, the actuator arm has no thread on it, thats why i am trying to do it this way.

I have here a R31 GTSX which has had a RB25DET put into it out of a 97 front cut, so the problem is it's only running 4 to 5 psi when boost gauge was put on, i also know the 2 stage boost is not there either, so i went and got a bleed valve type boost contoller and it tells me to put it on the hose that comes from the actuator to the front of the turbo, Well the hose coming from the actuator goes to the plenum, i put the bleed valve there and it did nothing, i had a good look and i can't find any hose coming from the front of the housing at all?!! Can someone please help me with this as 4-5 psi is no good, Might as well had the old RB20 in it still!! Thanks in advance!!