lovelessnator

What size is the exhaust mate?

I will be in Melbourne this weekend so I can drop off for potential buyers:)

TTT

Hey guys for sale is my brand new fibre glass r33 gtr front bumper, it has just been sprayed in black!<br />I have fitted the bumper to my car but it is yet to be driven with it on so there is not one stone chip on it!<br />Fitted up perfect for me but I have since changed my mind an gone with a different bumper..<br /><br />It has two 10mm holes in it where I fitted my lights and there is two spots where I shaved a little bit out to suit my cooler pipping (see pictures) but other then that its spot on! I also had the two vent holes above the number plate shaved down a little an smoothed off because they looked chunky and out of place and it looks a lot better now.<br /><br />Price is $500 and I'm located in Rosedale Victoria<br />Ph: 0412285096 or reply on here<br /><br /><br /><br />

Hey guys can anyone help me out, I need the indicator globe holder (the plastic piece that holds the indicator globe) for a r33 s1 front bar fog/indicator light.. Or if I carnt track one down ill buy a complete set of r33 s1 fog/indicator lights?<br /><br /><br />Cheers

Haha yeh definatly wired but worth a shot just to see what happens:) All the best!

Sounds very much the same as what was going on with my car mate. For me the problem turned out to be in the tps wires! I found if I moved them around with the car running it would hunt and in some places be perfect, so I cable tied them off in a position that was good and it hasn't hunted again:) that's only a tempary fix for now until I re-wire it. Hope it's as simple as that for you like it was for me:)

I've got a forged 25 and mine has piston slap on cold starts but once upto running temp it's dead silent. If its still got piston slap once at running temp I'm going to say its abit of a ticking time bomb!

I haven't as this is how I brought the car but it will be getting a look over very soon as its booked in for a e85 tune so he'll tell me if anything seems sus on the dyno

Offers welcome?

Back up^

TTT

The radiator came with a new cap rated at 1.1 bar so I'm assuming this is why there is the extra pressure? So this is all normal in other words?

I installed a alloy radiator into my 33 a few days ago but when the car is dead cold an hasn't been drivin I can take the radiator cap off an about 50ml of water will shoot out! This never happened with the standard radiator in it. So why is there so much pressure? I thought if there was pressure it would excape out the over flow bottle.

Hey guys I've got a few parts laying around collecting dust so I may aswell get rid of it. R33 turbo, absolute minimal shaft play and doesn't blow any smoke but it is missing the C clip to hold the actuator arm on $300 ono Standard turbo exhaust manifold with heat shield $100 Standard inlet manifold with runners but the tb has been moved so that it like a forward facing plenum, comes completely bare it's just the inlet manifold and runners $150 Complete r33 air con setup, only removed it a few weeks ago and was all working perfect! Please make an offer as I'm unsure on what it's worth? Located in Rosedale east Gippsland Ph: 0412285096

So the other day I poped in an seen my mechanic to talk about a set of cams for my r33gtst making 307rwkw an after about 5 minutes he ask me if I've considered e85, I said no as I "thought" there were no stations around where I live that stock it! He fills me in with quit a few locations only 15minuts from where I live so now I'm interested all of a sudden:) Having never researched e85 myself my trust was 100% in his hands.. Can someone give me some info on problems that I might incounter? Also what's a realistic area of power that I will see after the tune is done? Mods High mount 35/40 63r Greddy plenum Cooler 3inch exhaust Fpr Custom rail 875cc injectors Twin walbro 400lph pumps

Can anyone give some info on my question? I've been searching everything but haven't found what I'm after

Hey guys I'm just wondering if I could get some info on a few questions I have in regards to installing a set of cams. Cams I'm looking to purchase is the tomei 260 in/ex an ill also be purchasing tomei type B valve springs to suit. Engine they will be fitted to is a S1 rb25 making a little 300rwkw. Ok question time:) The cams come in 9.15 or 10.25 lift so which one would suit my needs? (Standard specs re-freshed head) Does the tomei 260 cams allow me to retain the VCT? Do I need adjustable cam gears? Also if anyone has installed these cams into there rb25 it would be great to hear how they perform, Cheers

Pm'd mate

Haha to easy:) anyone else got one out there??

When is it available mate? I need one asap!

Hey guys I'm chasing a r33 s1 grill if anyone has one? Must be in awesome condition, cheers

That helped clear things up a little:) cheers mate

Hey guys done a search but didn't find what I was looking for. I need a new radiator an there seams to be a lot on eBay for around the 160-220 mark but how good are they? What should I be looking for as I'm unsure? My r33 is making a tad over 300rwkw and is using the standard radiator but its has a hole in it so I'm looking to replace/upgrade. What would you guys recommend for me?

Hey guys I'm chasing a r33 s1 bonnet in good condition so let me no if you have one Cheers