Plop lock & wipe

Hey champ, Not sure what it was making at the time. Was fairly laggy on my 26 til around 4-4500rmp, but would definately suit a 26/30 setup better. Good luck with the build mate. Andy

Turbo and wastegate SOLD! Still got the manifold and front pipe.

Sorry mate, but no. Thanks 4 the offer anyways

[email protected]

Are u serious??? You'd be better off buying a new turb locally mate! But i'd ship it to you for $2000 including postage hahaha. Jokes aside, still got this stuff. PM's replied to. Will separate if need be.

Hey mate, sorry for the late reply, I have no net access at work. Exploration drilling in the middle of no-where for two weeks. The brand is "Monsta", as I said i've never had a problem with it apart from being too laggy for my application. Anyways, heres some specs off the turbo from the Monsta Turbo page on eBay: The turbo offers the low inertia and fast boost response of the light weight T3 Turbine wheel and the high airflow characteristics of the T70 compressor. Air flow rating of up to 800HP 3" Inlet Diameter : 2" outlet : Wet Floating Bearings : 1/8 NPT oil inlet T3 Flange : Fits T3 and T3/T4 Manifolds Front Cover A/R .7 Front wheel trim 64.5mm Rear Cover A/R .82 Rear wheel trim 60.5mm Im wanting $500 including postage anywhere in Aus for the whole setup.

Hey mate, Im keen on the coilpack cover and cam gear cover if you have these.

Still got all this stuff sitting around here. Someone must be keen!

Would you still have the Twin Turbo Pipes off your old setup mate? Im going from a single turb to twins on my R and its the last bit i need. Cheers, Andy

Hey champ, I got an R32 GTR im looking at selling. Wanting around $15k. 136000km's, gun metal grey, great condition in and out, cept for a ciggie burn in one of the seats. Comes with a Haltech E11V2 ECU and 3-bar map sensor, fairly new V-spec turbos with braided lines, oil cooler and remote filter, carbon fibre bonnet, 17" Rays wheels plus a few other things. ECU has a base tune on it currently so it is driveable, but it needs a full Dyno tune which is on the cards in the next month or so. Give us a yell at: [email protected], PM me or give us a call on 0408715928 if your interested. Car is located in Tassie, I can email you some pics if you want. Let me know. Andy

Im after the Twin turbo pipes and applicable hose's that go with it. Still got these? Andy

Nah dont think it will fit mate. Someone correct me if i'm wrong. You are more than welcome to test it out first if you want to.

Open to offers. Throw me one and i'll let you know. Just need this stuff gone

Sorry bout the lateness of the pics, but here they are. Monsta T70 Turbo: XFORCE S/S Top Mount Exhaust Manifold: After removing the Exhaust wrap i discovered an Xforce badge Dump Pipe/Front pipe: Uses R33 sized O2 Sensors. Still has the exhaust wrap on it from previous owner but im removing it prior to postage. 60mm External Wastegate: Still cannot figure out what brand it is, if any. Never had any problems with it whatever it is. Any questions just ask. Just want it all gone, the money made from the sale of this will be used for the tuning of the new twin turb setup. So please buy me! Andy

Hey mate, I'll take the RB26 Twin Turbo pipes off you if they havent sold already. How much including postage to Devonport, Tasmania 7310? Andy

Yep, no worries cheek. Forgot to mention it is a high mount setup, and doesnt require water lines. Andy

Hi all, Recently changed from a single turbo setup on my R32 GTR for twins so the old gear has to go! This setup was on the car when I bought it and ran fine. A little laggy for the RB26 but when it did finally come on song it was great. Turbo: - MONSTA T70 Turbo. T3 Flange, A/R .70 front, A/R .82 Rear. No shaft play from what I can tell. V-Band clamp to the dump pipe. Comes with a braided oil inlet line. Great condition, never had any problems with it. Manifold: - Unknown brand Stainless Steel Manifold to suit above Turbo. No cracks etc, good condition Dump/Front pipe: - Looks like a custom 3" dump pipe/front pipe that runs straight to the cat. Has mounting brackets to secure it. External Gate outlet. Good Condition. External Wastegate: - 60MM External gate with screamer pipe attatched. 1bar spring. Unknown brand, will try to find some more info on it. Currently dont have any pics of said items as I am at work right now til Tuesday, but will update this post with some photos ASAP. Looking for $500 ono for the lot. Buyer pays postage. Items are located in Hobart, Tasmania. Cheers!

ALL SORTED! THANKS STUART!

Will take the O2 sensors! How much for postage to 7011 Tasmania?

Hey all, Chasing the water line for the turbos that runs across the top of the turbo side of the engine and the oil T-fitting that screws to the engine on the same side for the turbos oil lines. Heres a pic of what im chasing: In tassie, so willing to pay postage no worries. Need it urgent. Cheers!

Hey Russell, I've got a very clean R32 GTR in gun-metal grey that im looking to sell very shortly. I'm in the middle of swapping back to a twin turbo setup as the previous owner had a big single strapped to the side. Once they're on and the car is retuned for them I will be selling her. Left a message on your phone with my number. Andy

O2 Sensors available? If so how much?

Hey mate, would you have the two O2 sensors?

Thanks mate, will be taking a look at it this weekend to see whats going on.

Hey all, My friend has a R32 GTR, running single high mount conversion, 50mm Ext. wastegate venting to screamer pipe, runs around 1 bar. The other day we were giving it some stick along some country roads, wastegate opened and screamer sounded as normal, but when we slowed down to idle we noticed the car had a strange exhaust note. Got under the car as it sounded like an exhaust leak, and found exhaust passing thru the screamer pipe at idle. From what he thinks the wastegate is staying open and not holding pressure. Could the gates diaphragm or spring be stuffed? Any ideas? Were taking it off this weekend to have a look at it, just want to know if anyone else has had a similar problem before we do, and whether its worth just buying a new one to replace it. Cheers