lachlanrb20s13

BUMP!

sorry, might help edgewater, perth, wa

carn guys ive got an eye on a new set of rims

bump

price drop $1400 or $1700 with 4 newish tires, check the top

bump

pm sent

front: 17x9.5 +43 plenty of tread rear: 17x10 +35 plenty of camber wear multistud 4/5x114.3 this pic is with 20mm spacers on the front most rims have a bit of gutter rash $1500 $1800 with 4 80%+ tread tyres and the ones on there atm

much appreciated

bump

which one of these holes is where the speed sender goes...

hyperdrive seem to be the place most ppl get a nistune installed, but quite a few other shops do em. yeh its $880 or so for install + tune but i got mine for $650 as i already had a chipped ecu i was speaking to andrew (owner) about other ecu options such as power fc and greddy e-manage, and he said sumthing along the lines of "if u want a hand controller, go the power fc..but its no better than a nistune. dont go a emanage..even though i am a greddy distributor i dont like to promote them. nistunes are awesome and do the job extremely well"

food for thought- my rb20 s13 with a t04e ran mid 14's with a bad launch and mid 12's with a good launch

hey yall i have an rb20 s13... the guy who had it b4 did a bodge job of installing a defi engine temp gauge, basically just drilled a hole and was glued. so it has eroded away and popped out. tried to reseal it with a number of sealants n adhesives n plumbers tape etc but the pressure+temp changes just crack it back open. went to radiator mechanics n they said the only permanent solution is to remove the piece, and get them to weld a nut on for the sensor to screw into. my question is: is there an easy way to take this piece off.. does any1 know of any other ideas the piece is the metal tube attached to the hose coming from the top of the radiator

that r34 is the gt autosound ls1 tt, absolutely mean set up