tiels32

Great write up mate. Spent my Sunday morning reading thru it. Was wondering if you have done any brake ducting (how and pics?) and where you got the passenger side head light carbon duct from?

As title says installing a s1 rb25det into my r32. Using the rb20 loom as I already had an ems stinger ecu wired in. Questions: the brown plug on the iac valve, can I just push the rb20 plug into the rb25iac valve? Not sure if I read once someone had swap the 2 wires over? Can I use the throttle postion sensor on the rb25 throttle body or do I need to swap it with the tps from the rb20? They both look the same. Plug fits on.

Try Lewis Engines for an extended, winged, baffled sump. And he'll weld however many more fittings you want onto the sump. Only cost $420 plus extra for each fitting you got welded to the sump.

using stock r32 cat i cut off flanges either end and i managed to get a 3" pipe thru it before welding 3" flanges back on. Works a treat

I'm running a 2540 on my rb20. Running 16psi and making 220rwkw. Tried running 18psi but it was pinging. Even though im using a ems computer my tuner told me he wasn't able to tune out the pinging. It comes all in at about 4100rpm but i think that feels pretty laggy. Anyways nearly got the s1 rb25 ready to drop in. Will be trying the 2540 on the rb25.

any pics of cold air box?

interested in front and rear seats but i'm in adelaide. Would u post to 5126. How much? What condition the seats in. Any rips. Do the GTR rear seats fit a GTS-t? Cheers

Interested in the projector headlights. Do all the headlight adjustments work? interested in the single passenger side air vent if you have it to. Would you post to 5126 adelaide?

Damn I only just seen this group buy. I would love a 19 row. Let me know if any spots become available.

Hey mate ... .are they projector type headlights? Do all the headlight adjusters work? Would u post to sa?

Are there any disadvantages to running a 80mm throttle body on a greddy manifold on a rb25 if your "only" making about 250rwkws?

Hi guys. As the title says i'm putting a series 1 rb25 into my r32 gts-t. At present i already have a EMS stinger 4 wired in running my rb20. At this stage i'm thinking its easiest to stick with my current loom and swap any sensors i can off my rb20 and put them on the rb25. i'm guessing this isn't possible with anything (aac valve?) which i would need to get wired up separately. I'm using my top feed injectors as i got a top feed fuel rail with greddy copy inlet manifold. I did get a engine loom connected to the rb25 when i got it but as it came out of an r31 ( It was running no prob in the 31) its messy with bits hanging out here and there and i dont know if anything important has been disconnected. Whats people thoughts: is it worth using the rb25 engine loom and getting that wired into my car and the EMS? i see someone on here selling a rb25 s1 engine loom that is suppose to be a straight plug in to a 32. not sure if it would be worth buying that but then i would need to get that wired into my EMS. Just thinking you could be buying someone elses problems and the money better spent wiring up what i got. Can anyone recommend someone in adelaide that really knows these conversions (wiring side). So far i've been getting my tuning done at boostn oz and so far i don't have any complaints. Also just wondering about wiring in the 25 box. My mate and i doing all the mechancial side of things just not sure about the wiring. Any thoughts are appreciated i just want to do it the simplest way.

What sort of condition is the steering wheel in? Any pics?

As title says i've got an r32 gts-t with a gtr front bar. I've been out to a couple of track days and am looking at getting into more. I'm would love to set up some air ducting for the front brakes. I wanna attach a bracket or collector of sorts behind the slots either side the lower lip of the front bar (something to attach some hosing to that will collect the air from the front). I've never seen anything like this for sale. Guessing something should be available being 32 gtrs pretty common track toys. I was thinking of just making some myself but was just wondering if these are available? Cheers

hey mate.... i'm interested in the injector loom without the injectors. Is it in good condition, plastic connectors not to brittle? Would you accept $30 posted to sa 5126.