lawler

Hey man can I grab your number for a mate thats after a few parts for his gtr and were are you based?

Hi im new and just thought illd post up the last few photos ive taken of my car as Ive been moving wirring, working out cooler pipping for new turbo set up and a few other bit

Name: David Location: Devonport Job: 4th year apprentice mechanic Car: Nissan Skyline s2 r31 Mods: to much to re type http://www.skylinesaustralia.com/forums/La...31-t298196.html

Just a few more pictures of parts that are going/are on it

Na Im just trying to find out what the spec are. I already have white line fronts with kyb shocks and r33 front struts in the back on custom diff mounts

Is this thing gona be auto or manaul and you said a gtst do you mean a 32 or 33 one?

Hey man nice 33. Got much planed for it?

Any idea what they would be with a coil cut off them? also dose anyone have the measurement or specs of whiteline r31 springs? then I need to know what the spec would be with a coil cut off them Plz no one flame about cutting coils being dodgy and to just buy good springs. there's a good reason for me to be asking. I didnt cut them but they seem to be a good rate so I want to know what specs to be after when/ if I change

Well I joined up a few months ago but I never got around to posting up on here. When i first go it RB25det with broken piston ring cut springs stuffed lsd What I've done so far Engine RB25/RB30 RB25det s1 head NA RB30 bottom end Greedy style plenum Stanless high mount 38mm external gate with 6psi spring T04z with .86 rear housing now going gt3540 with .82 exhaust housing for quicker spooling intercooler custom short piping, 2 1/2 inch hot side and 3 inch cold side 3 inch exhaust 50mm alloy radiator Boosh 044 fuel pump Surge tank R33 intank pump feeding surge tank Driveline RB25det gearbox Extrame cushin button clutch custom on peace 3inch 3mm thick tail shaft 3.89 Weldy now got 3.7 Suspention/Brakes Front: R34 4potters on 310mm rotors whiteline springs and kyb shoocks front nolithain bush kit Just scored a jap inport steering rack wich are a quicker ratio Rear: r33 gtst front struts with a coil cut off them on modifyed mounts Full nolathain rear bush kit Interior Both buckets seats installed now Timex gauges- Tacho/speedo, air/fuel, boost, oil pressure, water temp Speco gauges- fuel leval, volts sound deading stripped from the front of the front seats back stripped boot Mods in the near future remaped rb20 ecu and z32 air flow meater turbosmart boostcontrolar-got now just gota install s13 extra lock spacers for inport 31 rack nolithain rack mount bushes rose jointed caster arms brass streering sfaft joint to replace shit ruber one The car Old set up low mount T3T4 Started moving wires, staring to work out new turbo set up, New taillights and bushes and a few other bits

Well I joined up a few months ago but I never got around to posting up on here. Well my name is David and I live in Devonport in tassie and this is my R31 When i first go it RB25det with broken piston ring cut springs stuffed lsd What I've done so far Engine RB25/RB30 RB25det s1 head NA RB30 bottom end Greedy style plenum Stanless high mount 38mm external gate with 6psi spring T04z with .86 rear housing now going gt3540 with .82 exhaust housing for quicker spooling intercooler custom short piping, 2 1/2 inch hot side and 3 inch cold side 3 inch exhaust 50mm alloy radiator Boosh 044 fuel pump Surge tank R33 intank pump feeding surge tank Driveline RB25det gearbox Extrame cushin button clutch custom on peace 3inch 3mm thick tail shaft 3.89 Weldy now got 3.7 Suspention/Brakes Front: R34 4potters on 310mm rotors whiteline springs and kyb shoocks front nolithain bush kit Just scored a jap inport steering rack wich are a quicker ratio Rear: r33 gtst front struts with a coil cut off them on modifyed mounts Full nolathain rear bush kit Interior Both buckets seats installed now Timex gauges- Tacho/speedo, air/fuel, boost, oil pressure, water temp Speco gauges- fuel leval, volts sound deading stripped from the front of the front seats back stripped boot Mods in the near future remaped rb20 ecu and z32 air flow meater turbosmart boostcontrolar-got now just gota install s13 extra lock spacers for inport 31 rack nolithain rack mount bushes rose jointed caster arms brass streering sfaft joint to replace shit ruber one The car Old set up low mount T3T4 Started moving wires, staring to work out new turbo set up, New taillights and bushes and a few other bits

Hi i was just wondering if anyone has the spring rate specs for Whiteline R31 front springs and Im also after the spec of standard r33 gtst front springs?

dose anyone know the sizes for r33 standar front springs or the rate of them?