Kandikid

Just got my self an F50 Cima to daily as its a bit more comfy than the 33 for city driving, and want to convert the Xanavi unit to english. Ive seen this have been done with the V35 and V36 Skylines. Did some digging and the only details i can find of people who do this are 5 years old. Was just wondering if anyone has an Up to date list of names and contact numbers? I tried calling the number for the Perth Contact (Nigel Danson), but it just rings out. Thanks -Brad **EDIT** I know that it wont make the nav system work, and thats fine, I can also install a seperate head unit for Audio....but the unit controls everything on the cima as far as dash cluster, AC, vip options etc and would be good to be able to read them and change them to my desired options **

PM sent

Got mine brand new from yahoo auctions bout 12 months ago. They are made by Sexy Style Japan. Carbon Fiber one - ~$200 delivered FRP one - ~$150 delivered

You mean something like this one?

Chasing the 2 Brackets that bolt the rear bumper to the chassis? are they available?

Just finished putting a S1 RB25 into my S2 33 4door Shell. (engine, box, Engine loom, and Nistune were all working when they came out of my old 33 and went straight into the fresh shell, no changes) It cranks over but wont start....because i cant get a spark? (ive check my splitfires, coil-pack loom and ignitor pack on a mates 33 just incase and was all good) I have power to the ecu, lights, my gauges, dash, vct controller, a/c, stereo etc. When i turn the ignition to on, fuel pump primes (and yes fuel lines are on the right way) if i take the CAS off and rotate it by hand, the injectors click but still no spark. (if i remove the injectors i can smell fuel) No ive been doing some searches here and on Google regarding this, and read 2 things ive been unable to verify, as im slowly trying different things. 1. On the plug behind the Passengers headlight (engine harness to power loom) their is a grey wire that needs Ignition Power? 2. Their are a few wires that need swapping on the White M63 Plug behind the passengers kick panel? If anyone could shed some light it would be appreciated Thanks

Ive Just finished pulling the RB25 from my 33coupe and putting into a 33sedan shell i was building up. Straight swap (engine, box, ecu, ecu loom, etc) Apart from giving it a service while it was out the car, nothing else was touched. All the headlights/tail lights, dash, windows, mirrors, all my gauges, VCT window switch, Etc work. But when i try start the car it just cranks, but get no fuel or spark? - I took the old fuel out our and bridged the fuel pump with the feed line unplugged toget rid of all the bad fuel, so i know there is fuel going to the rail. - checked all the coilpacks on another car they worked. - Cas works on another car So im guessing its the ECU not earthed somewhere, Im just trying to work out wher all the ECU earth points are? Or if anyone has any other suggestions of what to check/try Thanks

As per title Want to buy An R33 Sedan (4 door) Rear bumper, Either stock or aftermarket, not fussed at this point. Show me what ya got! PM or 0408 929 316 thx

oooh kay, wish i'd seen that before i pulled the adapter off and cracked all the powder coating -_- lol. I'll give that a try tomorrow while im home, thanks

I did manage to flip my tb and it fit, will just have to put a clamp on the cable (peddle end) but still not to keen on the angle that its being pulled at... KiwiRS4T - would it be possible for you to get a few pics of what you did and post em up for me to have a look see. thanks

I dont know if the sedan will work with the standard adapter.....thats what i wanna know before i buy one lol I might try flip my adapter round and see if i can mount the TB on top, just not sure how that would work with the cable pulling on an angle, it might come out of its rail on the pulley when on full throttle...

Hey People Just finished pulling the engine out my coupe and dropping it into my sedan. Problem is because of the diff shape of the fuse box, the stock TB wont fit (pulley fouls on it fuse box) Im not using the std greddy adapter i had a slim line on that was machined up, so i didn't have to change the throttle cable. Can be seen on the front of the plenum Now before i go off and buy a genuine adapter, i want to be sure it will actually clear it? (every one ive asked from all the places ive spoken to so far, just tell me, "coupe and sedan engine bays the same" and well thats not the case.) OR Can i just bolt an 80mm throttle body straight on? without catching on the fuse box? (coz ive found a nice black one to match the plenum. and if i do this should i need a retune (i know i prob sound like a retard, but it make sense to me that if im increasing how much air gets taken into the manifold, then the values are going to change) thanks, and hope this makes sense

awesome thanks Chris It just as simple as unplug the whole box and take it out? Wont have to rewire anything?

Hey guys n gals. A few months back i bought a 33 Sedan Rolling Shell to do up and move everything from my aging Coupe into. Im currently tidying up some wiring under the dash and found something no one else has been able to enlighten me on. So without further adieu, ill let the pictures talk. Was finishing up all the engine bay wiring, and came across these out the side of chassis, Traced them back under the dash? To these plugs that went to this box? and the other wires from the box went upto this... so yea......what is it? do i need it? can i remove it? also 1 more wiring question....that may or may not be able to be answered here..... Is my labeling correct? I want to fit up S1 headlights....can i cut the series 2 H4 plugs off and wire it upto the plug for the dual H1 series 1 headlights? Thanks

Few months back me and some mates done - Great Eastern Highway all the way up to Bakers hill (for pies) - Thru Clackline all the way to York - Then York road over to Northam - Northam-Toodyay Road to Toodyay - Back down Toodyay Road to Midland Was a Good 250km, and an awesome day of Driving, didnt see a single cop, amazing scenery and country roads. Plenty of places to stop and look around do photos etc, We made a full day of it with the stops, and going exploring side roads.

strange request - but after a cheap r33 headlight (can have broken mounts, broken/cracked lense etc) doesnt need any caps or wiring. can be left or right really just needs the black back piece, and the reflective pieces inside, so i can use it for a side project. thanks PM or text 0408 929 316

So my current 33 is a 93 coupe ......shes gettin on and starting to show her age, and i decided it was time for a transplant. I got hold of a 96 33 Sedan shell (complete minus engine box and front panels, headlights etc.) and over the last few months have been working my way over it, taking everything apart, cleaning it, replacing anything that needs to be, pretty much building it up into something i can be proud to say ive done myself. Everything seems to be in order ready to move everything over, except the headlight plugs? the sedan shell seems to have 1x H4 plug opposed to the coupes 2x h1's. Can i cut this plug off and wire it into the S1 plug that has the 2xh1's? hopefully that makes sense. Thx

Yea the insert, with or without speaker grills, aslong as its from a 4 door.

as per title after a rear parcel shelf for an R33 Sedan. thanks 0408 929 316

Was wondering it anyone wanted to do a quick cashy I have an R33 with an Rb20 nistuned ECU, no VCT. So Ive gone and bought a Summit RPM window switch, ive got all the instructions and what not. It doesnt seem like a hard job, Im just no good at doing my own wiring Thanks Note. Im out Past Mundaring but am happy to drive down to, just rather not have to book it into a workshop and leave it there for a few days.

have you tried http://www.aliexpress.com always seem to find random cool replica CF and FRP stuff on there.

Ok heres the pics... they have the same mounting bolts and this is the gap - - so what i was thinking was if i had this bit shaved down then they should line up?

my bad, heres the pic. Same mounting points, but because the 4 door has window pillars it wont line up properly. ill get some pics of it tomorrow and put them up

So im in the process of building up an R33 4 door shell and happened to get my hands on some genuine ganadors for literally the price of peanuts. Now as far as i know they never made then for a sedan, so my plan was to just sell them on, but after seeing a 33 sedan on yahoo japan with a set (pic attached) I got very keen on trying to fit them. By the looks the lip bit that over hangs the doors on the coupe just need to be removed then the whole thing smoothed off, but before i commit to this and end up ruining them Has anyone here done this? or have an idea on where to start? thanks

sweet, let us know , thx