32_Dave

how much boost you running?

fair enough keep the bumps coming.

howd it go?

rb20 w. box - sold front 5studs (33) - sold r34 drivers seat - sold glove box - sold everything free minus... 32 dash - $40 ac controler - $20 rear lights - $10ea rear bar - $20 guard - $50 gtst bonnet - $20 32 tailshaft - $50 33 tailshaft - $50 have lots more just PM the rest come get it.

core sold. seats $20 - there good nick so would be good for a swap over. front bar 200.

selling due to having 2way

Item: R200 w. 0.80 Shim installed Condition: Housing has been painted / shafts (black) looks new. Price: $120 More Info: Has new oil, shim installed without lapping, would recommend diff to be lapped. Had another done like this, worked perfect in a mates 32 without lapping, made slight wine at high speed 100km+ and made the usual skips / clunks. Lapp the diff (mesh gears) properly if you want. Most likely 4.11 but not sure if auto or manual. Pics: tomorrow.

and the bumping starts, ill offer the 200 and you keep the coilpacks?

sorry mate, its really not hard to do yourself i have not personally tested it yet as i haven't finished building my car, however a mate ran this in his race car with no issues, since then its changed owners. ill be testing mine within a few months i hope.

merry Christmas fellow sau-ers. Anyone get anything sweet for there lines?

f**k that, im going to be a contractor.

google is such a useful tool.

and all this time i thought it meant "edwardstown baptist church"

hahah, is it to soon to say i less that 3 you <3 on another note 1000cc @20% thats a good 1200bux spent.

hows changing ecu effect your actuators? electrical vs. mechanical...

+1 its the same as the electric motor principle, you'd understand ur an elec engineer. why put a small elec motor to do a bigger motors job as it will put undue stress and cause it to wear prematurely. and why put a bigger motor to do a small motors job as it will run in-officiant and cost you more. same principle applys to your injectors. in your case your injectors at 22psi (98%) is the small elec motor. hence why your tuner has advised the 16psi.

lame, tripping the rift is where its at, found this show in year 9 or 10 f**kin hilariousness.

you mean 65 from the lowest point on your car. measure height from the back chassis rail. all fits bro. same pipe If it has the nut on the top. this will apply. How do I adjust my SSQV? First you should know that the usual tight/loose rules do not apply here. The adjustment only affects the outside black valve, not the inside purple valve. No matter how loose you adjust the bov, it will not leak. However, if you adjust it too loose, the parts inside will come apart and possibly jam the bov. For most applications you want the loosest setting, which allows the bigger valve to open faster loosing all of the compressed air If you adjust the bov more tight, the air will only come out of the small valve first, then the larger valve, depending on the tension. This will create a louder high pitched sound for the small valve, and a smaller deep pitched sound for the large valve. Some people like the bov tightened all the way for maximum "shreek" upon release. You need a 10mm wrench to adjust. Loosen the nut closest to the bov slightly. Now you can adjust the top bolt to your liking. Go for a drive. Once the bolt is where you like it, turn the nut to the right to "lock" that position. Do not over tighten the bottom nut. Again, be careful not to over-loosen the top bolt. If you loosen it too much, it will come right out.

may as-well keep it. dont give me that crap josh, your just as bad. yes, kids...

head down to repco or similar that deal with bosch belts. ask for: Alt 4PK880 A/C 4PK925 PS 4PK955 there around 8bux ea so if 1's shagged the others will be close so may as well do them all.

you said it.

front Castor brackets? they sit bellow rad. pm me a price. cheers

just got a complete long motor for 400bux. gl clown to you and your 600... stnd coil packs are 60-90bux do your research.

you fuggen know it. black my friend. found a black from a old falcon its jet jet jet black, soo sexy. ive already sprayed it on the interior, looks good

fit coupe? can i grab a photo via pm? ive bought shit off ya before to so im keen.