-scooter-

Hello people For sale is a A1-C monster tacho with shift light. all wiring is labeled for easy install. Has a switch and a dimmer for blue or green background colour but the shift light is permenant red. It also has a dial to change the shift light revs. I am located in ipswich, Brisbane, QLD $200 E-mail - skyline87@dodo.com.au mobile - 0411821541 will post to anywhere in australia at buyers expense. cheers Dan

Honda CBR250RR 1991 model Has done 48,183kms with service every 5000 kms with receipts since i brought it in August 2004 with 31,353kms on the clock. Is regestered till 28/7/06. Will supply RWC unpon sale. It was complied in september 1998. Has near new back tire on the back with brand new mirrors and foot pegs, Recent front and rear wheelbearings, neck bearings, chain and sprockets. all brake pads done about 6 months ago. I have reciepts for every dollar ever spent. Comes with R-JAYS all wheather jacket, HJC Helmet, disc lock with spring reminder and a gear sack and rack. Both jacket and helmet are red and black to match the bike aswel as the gear sack. Bike has a polished frame and rear swing arm and a custom red see through viser. Bike is in excellent condition and would be perfect for learner or enthusist. I will have more pics up tomorrow for you. Location: Ipswich, BRISBANE QLD Price: $5500 with rego and RWC and accseories Contact: 0411821541 - 8am till 3pm mon - fri anytime sat or sun. If you would like any more info just drop me a line at - skyline87@dodo.com.au

OOOHHHHH ok old tech i c. I am in the process of learning all about turbos and specs and old and nes and 360 degree thrust bearings all all the mumble jumble about them. 3" Inlet Diameter : 2" outlet : Wet Floating Bearings : 1/8 NPT oil inlet T3 Flange : Fits T3 and T3/T4 Manifolds Specs: . 50 a/r compressor .63 a/r turbine .57 trim Turbine wheel: Exducer: 2.48" Mayor : 2.89" Compressor wheel : Exducer: 2.07" Mayor : 2.36" If any one has the time or patience to explain to me wat all the above means that would be awsome. Cheers Dan

Hey guys, Just wondering if anyone has had some experience with putting an T04E rated at 600hp on a 32 GTR??? Any info or comments will be great cheers Also i am looking for a thread about single turbo conversion campared to keepin the twins on a gtr, i spent 2 hours searching but found nothing.. Thanks Dan

Hey mate Could you please e-mail me some pics of the motor if you have any. skyline87@dodo.com.au Is it still running? no problems with it? very interested, Would it be posible to come and see it this weekend (26th or 27th of feb) Dan

Item:Nissan R31 Skyline 2 door import with rb20det red top (NICS) Location:Redland Bay Item Condition:I am selling this car as a project car as the motor has a snaped timing belt and im unsure of internal damage. Reason for Selling:making way for 32 GT-R Price and Payment Conditions:$2000 Extra Info:The roof is faded, and there is a very slight ding in the rear right panel. interior is in excellent condition but has no sterio. Everything on or in the car was working fine proir to the big SNAP. I will not wreck this car selling as a complete car. Contact Details:Dan 0411821541 mon - thurs 8am to 2:30pm as i work night shift and anytime Fri - Sun

Wanted: R32 rb20det silver top motor, gearbox (manual), loom, ecu. Everything need to put into an r31 import. ready to buy rite now, no bullsh*t. thanks

hey fellas, am buying a silvertop rb20det for a 31, now import spares in SA want $2200 for complete conversion kit (motor,box,loom,ecu,turbo, etc) delivered here to brisbane. should i just wait and c if i can buy one privite or wat? IS THAT A RIP OFF????????????? cheers

Hey guys, i am currently putting an rb20 silver top into my 87 r31 gt import (orignal motor was an rb20 red tops nics). I just have some questions that i need answered please..... 1. how will i wire the standard tacho to the new computer? 2.i have ABS, will this be affected 3. will the vechile wiring (eg. starter motor, alternator etc) be the same to hook up to the new rb20? Aso i brought the motor from a wreckers and it is fairly clean and looked after but i am just wondering wat u should do to a motor from a wreckers (eg. give major service test injectors and coil packs etc)??? Wat oil and coolant do u guys run in your motors? Thanks Dan

hi guys, i am looking at buying a silver top rb20det from import spares at winsor gardens in SA (i live in brisbane). i am just wondering if there is a difference between automatic computers and manual computers, meaning auto gearboxes and manual gearboxes??? Thanks Dan

hey col gts-x i live in brisbane and wondering if u still have the nics motor for sale, as i am willing to buy 2morrow (3rd sep 05). let me know ok later Dan

Hello people, I live in brisbane and i am chasing an RB25det with manual gearbox and loom, no computer as i am getting a power fc. i have rung 9 different import wrecker and all have nothing :matrix: so i figure what better place then NSW to find one. So i am asking if anyone could give me some numbers of wreckers down there that they may have had some experience with. Just so im clear i am NOT after an R33 front cut as that is a waste of money for me (to many un-used parts), i just want a complete rb25det with manual box and uncut loom!!!!!!!1 how much could i expect to pay for this up here if they ever have any it is about $2800 - $3000 thanks for any replys Dan

I had a friend give me a cd with non stop vids from full boost with a few r31's on there, one r31 had an RB25 with a gt2535 and many other mods and got 358rwkw. so i got to thinking, and decided that for around the same price as an r32 front cut i can get a rb25 motor, loom and ecu. so the plans have changed and a couple more questions for u guys. 1: i know the 25 gearbox is longer the mine so tail shaft length will be a problem, does anyone know a rough price to get one made up? and will the 25 box fit in the tunnel with no mods? 2: how will my diff hold up to an RB25 with say around 250kw??? 3: any mods needed to be done to the engine mounts for th 25??? thanks guys Dan

thanks for the replys guys. just to sum up a few questions, my skyline is a manual but i want to put in an r32 box that i get with the front cut as mine has done 197 k's and second gear is being stupid. so i asume that my tailshaft will be a good fit, fingers crossed. I will read the RB20 250kw thread tonight, if i get time, Cheers for that. I pulled the air con out 2 years ago to make way for a front mount that was never fitted (dont ask me why, just lazy i guess). so no wire splicing needed there. Qustion: do u have to get a bracket made up for the power steering pump????? Question: will i get brakes with the r32 front cut??? Question : with the tacho, oil pressure, temp, and stuff like that, will that all still work with the new motor?????? i know i have to use the 32 wiring harness and comp, just no quite sure how the dash components and that works, if someone could shed a little light on this for me that would be great. :-) Question: If i change all the brakes over (rotors, calipers, stc) will i have to change the booster and master cylinder as well?????? Thanks for your help people will get some more pics up soon. Cheers Dan

cheers mate. hopefully all goes well. will keep the convert posted as it prgresses. i would like to know some more about turbo upgrades for the rb20 with about a $2500 budget for the turbo itseft. If people could let me know of there experiences or opion that would be great!!!!!! I will c if i can get some decent pics up aswell. thanks fellas and girls if there are any! Dan