kevr32gtst

hey mate could fit and balance using stick-on weights for about $100 all 4 let me know if interested

that silicon stuff i think is used to prevent rusting between bracket and the body i used seam sealer when i replaced mine and removed my fenders to access the two other bolts

yes definatly bleed the brakes before u drive it

hey bud do u mean its not flashing or the indicator is not cancelling if its just solid(not flashing) high chance is the flasher relay should be able to get a generic one from a repco store

i have a gutted cat out of a 34 gtt unsure of diameter pm me if interested im in perth WA

mirror in black good cond $30 + post im in perth

hey bud not 100 percent sure but i think white is for the illumination and green the rpm feed

hey mate i have complete front end suspension for a r32 what exactly do you need im in perth but i dont mind posting

replace radiator cap sounds like its not operating properly should be a cheap fix

could also be the engine sump gasket weeping blowing back check around the meeting point between sump pan and block if not id be the rear main

check timing with a timing light so you dont need to pull all the other bits off if the timing light shows its out of wack and your definate you did not touch the dizzy then you know the timing belt is not correctly aligned or has skipped a tooth also if dizzy is off to one side of adjustment you know t'belt is out

need both quater windows for r32 gtst im in perth 6065 let me know price thanks

putting a lock bar and caster bushes in tomorrow and need to know what specs i should set it at is has adjustable camber bushes car is used mainly on street and loward about an inch or two if anyone know the specs or can lead me in the right direction it would be sweet cheers

street all i got is top wishbone adjustable bushes just want to set up to standard specs

hey all i need to know what wheel alignment specs are for the 32 gtst front and rear putting a lock bar in and going to do a 4 wheel alignment cheers

pm sent buddy

hey mate keen on this can you post to perth wa 6065 also have you got the top radiator support the bit that the radiator mounts to i need a cut of it how much + postage

hi all im in need of a front reo bar ,projector headlights and also a cut of the top radiator support bar see pic to suit gtst all postage cost covered just let me know what you got im in perth wa cheers kev

maybe battery is dieing

thanks guys for the info ill prob go the gtr way

yeah website dont work are there any other places in WA anybody knows of

as title says im looking to buy a carbon fibre bonnet for a r32 does anybody know of shops in perth that sells them thanks

hey just a quick question the new tyres are they the same sizes all around or different if different that may be the cause of your prob different tyre rolling circumfrence can effect the abs speed sensors

hey guy holding the fan with one finger is a bit of a worry is that when the car is at idle then fan slowed down or held down and car started at work the way i test viscous fan hubs as i let the car idle then get a bit of card board to try wedge it to slow it down if it slows down quickly means the clutches inside are knackered prob reason why when acclerator is stabbed the fan is not keeping up with speed of engin just slipping on the spot do the test see how it goes good luck with it mate

ok thanks for the reply i see what i gotto do now so there is only one actuator and thats in the passenger door thanks heaps saved me playing around with the wiring