Jump to content
SAU Community

whisper that roars

Members
  • Posts

    17
  • Joined

  • Last visited

  • Feedback

    0%

Posts posted by whisper that roars

  1. oh ok so thats why my 350gt 2003 auto coupe sways badly on wet road .very dangerouus to drive in rainy days

    feels like left rear wheel wants to move first or faster than right rear wheel.

    if u put new tyres at the rear end , left tyre wears out way faster than right side tyre.

    checked alignment ,suspension all good but still fish tails on wet road even on low speeds.

    • Like 1
  2. All of u are right but ur forgetting one thing these headlights are made by humans just like us not God we CAN modifiy them any way we can with just a little bit of skill and lots of common sense.

    Btw the headlights i bought from infinit us for 800$ is not an aftermarket replacement but it is 100% genuine Nissan product .

    Ok for the sake of argument lets assume u can never correct a left hand drive headlight and ur involved in an accident the headlight will be f**ked any way for insurance investigation.

    trust me there is a adjustment inside the headlight to make projector look up or down or even left and right.

    But since all of you are rocket scientists and knows ur shit like me so You electrical,magnetical, nuclear, supernatural,chemical mechanical biotechnicals geo physicist engineers are correct , Happy now?.

    cheers

    Remember a half empy glass of water is also half full of water too.

  3. The projectors themselves are different for left & right hand drives. The housing does not change. Inside the projector unit is a "cutoff" plate which controls high/low beam. This plate is angled in a way to bias the light beam away from oncoming traffic. No adjusting of the US projectors is going to prevent glare and using US spec headlights will void insurance and likely earn you a defect notice.

    As for colour, you look like you have a Black on black scheme goin on. I'd go black bezel with chrome shrouds on the projectors.

    nop u wrong mate , u have to loose a screw at the top and tighten the screw on the bottom of the projector holding bracket to make it look downwords.

  4. i already have 06 model lights imported from infiniti us installed on the car. it need little adjustment to three screws inside the light assembly. ferntree gully nissan qouted me 2500$ for each headlight which was not even projectors ,went to infiniti us website bought both left and right plus left hand side power window motor including shipping for 800 AU$ genuine and brandnew.

    so back to question i think chrome one is better.

    cheers

    post-56662-0-04303000-1294181252_thumb.jpg

  5. Product Details: 18x9.5 Rota Torque - Hyper Black (E20)

    Wheel Style - Torque

    Wheel Diameter (Inches) - 18"

    Wheel Width (Inches) - 9.5"

    PCD Bolt Pattern - 5x114.3

    Offset - +20mm

    Hub Bore - 67.1mm

    Color - Hyper Black

    as you can see the offset is +20mm. The recommended offset is +22 so these will sit perfect on the 350gt / 350z. if you want to go even FATTER, i suggest putting 10mm spacers to bring them to a +12 offset but then you will need stretch tyres, your guards to be rolled, and finally some sort of camber arms to adjust the camber.

    Thanx

×
×
  • Create New...