SLAPS

Sold.

Sold.

Sold pending payment...

Adelaide.

Hi All, I have a set of 6 x R34 GTR Injectors for sale with upper and lower rubbers. They have flowed ~480cc at 40psi base pressure with less than 1.5% variation between. The resistor pack in the pic is not for sale however if required I will track one down for an additional cost. Good for 260-300rwkw. Excellent condition. $300 posted.

Bump.

My Garrett internal gate housing has 82 stamped on it. Make sure you get the xr6t style IW Garrett housing as I've seen some 'really' poor results from the .7 R34/VG30 style rear housings.

Sorry bud wheels sold.

Sold..

Adelaide

Bump with more pics and a price drop. $550

Congrats all. Top work SLED on the hard job of choosing the Committee.

$60 Posted. Want it gone - I have no need for it.

Depends... plumb back or screamer? IMO 3" is marginal for 320rwkw+ if the gate is plumbed back in.

Very nice... I am going with 470-490kw at the wheels. I wouldn't be too down about not going the RB30, its only 200-300cc's (once the rb30's bored) of which will only reduce peak spool by a few hundred rpm. So no real biggie.

If its the plug I'm thinking they are as cheap as the regular coppers. I personally didn't notice any difference, if anything it felt a little less punchy but that was most likely in my head. The idea behind the plug I believe is to prevent spark blow out at high combustion pressures. Grab a set of coppers with a heat range to suit your power and you'll be fine.

17" Jap Kosei lightweight wheels with tyres Bronze however they have been sprayed black Good condition no rash. 5 x 114.3 17x8 +38 225/45 Continental Tyres 30% 17x9 +38 235/45 Sonar Tyres 70% Sits really nice on an R32 and sits perfect on an R33. Doesn't require rolled guards or special wheel nuts. Great wheel for race/drift. WILL SWAP FOR R32 GTR WHEELS $600

Bump. $80 inc. postage.

On the ol RB20det there was a noticeable improvement in spool and the sharpness of boost transition. I'm not keen on the idea. Mesh stays for me.

Shouldn't be too difficult to cut the middle bolt down a little?

How do you find the stiffness of the HX35 actuator? The spring is rock hard or fairly soft? (can be pulled out easily providing u are holding on to something with it i.e vice grips)

I've been running an Exedy GTR 4puk solid button for some time behind the RB30DET making a little over 300rwkw so making a fair bit more torque than the average rb25/26. I went with the GTR clutch as they run the heaviest pressure plate. No issues with slip. Bites nicely and is very streetable. My old Extreme clutch was fairly useless.. Shuddery, very heavy on the leg and would slip easyish. I put it down to different materials as there was a noticeable difference in the look of the material.

Last sale fell through. The actuators back up for SALE! $80 including postage.

Good stuff Tangles. Good power from the auto. I've seen a fair few .7 avo's pull ~240rwkw. Need More boost.

double post....