luker

im re wiring my front headlights, the wires have been cut below the plug so i dont know which wire goes to the projector and which to the normal type of light is the projector the low beam? or the normal section thanks in advance

Just looking for the drivers side projector headlight now and a driver side orange indicator

Adding some spare interior parts and a pair of door seals (the ones that go around the body seam) and a set of indicators ones missing a plug and the top clip theres a crack on one of them also but hard to notice from afar $50 for both and like $10 each for the interior plastics LOOKING FOR A DRIVER SIDE ORANGE INDICATOR AND PROJECTOR HEADLIGHT

they hard to push down and they come up slowly not wet at all so i guess no leaks and no dents on the tube the springs on them have got so many coils even compared to my kyb's nearly double the rears are 4 stage height adjustable with that circlip

sorry forgot location VIC S.E suburbs and its an G11R 83-85 or somthing ill check in the morning http://autospeed.com/cms/A_1126/article.html?popularArticle

looking to get rid of this aswell charade turbo got it from council auction rebuilt the turbo but it still puffs alittle smoke, could be valve stem seals or something bad but its sounds good, starts first go and the A/c even works alittle bit, more gas and it would be better tyres are stuffed i would take $500 for it but no less

For sale: Look at the pics and ill try list everything front Tanabe shock with 5zingen springs NO TOPS will have to use your std tops to use em rear bilstein height adjusting circlip shocks ISO springs NO TOPS no leaks $150 the lot 300zx twin turbo engine unknown k's (under 100k i would say) came in with a spun bearing, and has since lost 1 of the main caps has most of the bolts on's still on, manifolds, injectors, coilpacks, small section of a cut loom, cas. you can see it all in pics was being set up for a gemini comes with trust manifolds (have been reversed and tacked to fit gemini) engine mounts for gemini $250ono for the lot --------------------------------- ECU's R33 gtr has a R3 code on the back $20 bug eye wrx Sti import $20 ---------------------------------- Rx7 series 4 turbo flywheel/weight and std clutch approx 60% meat left no hot spots $60 S4 turbo manifold plate $10 lowered RX7 king springs front $40 series4 import dash cluster $20 80k k's std shocks rear $20 import orange indicators $20 standard top mount 13b $30 hardly any bent fins battery box $10 suzuki 700cc top mount $30 front FC lower lip stick on(MISSING ONE SIDE) $20 std white rear S4 bar $10 nonturbo S4 auto slights slip when i replaced with half cut, been outside for long time $free rear fc subframe with wishbones, turbo disks, slight small mount dmg $20 turbo and nonturbo AFM S4 $20 standard Rx7 rims/tyres 2 have 90% tread (pictured) other 2 have 15% a few scratches no bends or anything major $100 PM or phone me 0415494235 WILL SWAP parts for R32 headlights R32 exhaust std/quiet

depending how far the rebuild goes, but i doubt most places replace things like oil pumps valve guides cam bearings then ya got things like power steering pumps and such, if they are your gonna be paying far more than and average rebuild plus you got labor and machining costs, your gonna get charged for engine removal/refit anyway not saying you must get a replacement motor but just something i wont do again

looking to buy a set of headlights for a R32, projector or not will pick up paying $200+ pm or call me 0415494235 luke HELP ME FINISH THIS

after rebuilding an evo engine and paying about 6k to get it done, only to have it last another 2 years (and not a very good 2 years) when that motor went for the 2nd time i went the option of getting a low ks engine from an importers, plugged it in and off i went best $2400 i ever spent there nothing like a low k's factory engine rebuilding an engine would be my last option unless you replace EVERY moving part of the engine, not just pistons rings bearing ect, its still going to be worn in most parts as much as it is now plus resell ya old engine for a few hundred and it just gets cheaper

cool thanks if anyones got any diff one plz let me know but ill grab a few from the wreckers and try it out thanks for the move also

after getting my car without a single fuse or relay in it replacing the 3 relays above all of the under dash fuses is giving me problems normally they are color coded but seeing as these 3 are not i have no idea which color to put in there is a blue relay the matchs and a green one that also fits the contact pattern is anyone has seen the 3 relays above all there fuses (incab) could they tell me what colors they are or if the blue relays are the same as the green relays hope ppl can understand that i tried to be clear and searching didnt come up with anything

last 2 things i need to get my car going R32 exhaust doesnt have to be complete i have dump pipe alrdy but if theres a full system for sale ill take looking for somthing stock or at least quiet looking to pay about $200 but more or less depending on what ya got 2 r32 headlights gts/gtr whatever just gotta match PM me cause i check pms alot preferable to be in vic plz thanks

yeah im really looking for a complete system pref stock

how much are you after for yours and what type are they thx

still looking for an exhaust system too and headlights

done spraying

some like it white?

just an update Still needing both headlights got everything else thanks tin

inlet manifold gone looking for a pair of R32 headlights if anyone knows any

will also trade for things i need for my r32 in the Wtb section

no had to use the wiring mod same as the z32

80mm so good fit to the original piping as you can see

anyone ever tried using a afm outta a vg30e from a 90 mdl maxima or you may be able to tell form the codes its idles fine but do to the front mount not being in yet i cant give it a drive to test it