r32gtrv-spec

yep ive gone with 303 aerospace, lots of good reviews about it on other forums

the rims pictured are r34 gtr rims, I was wondering what was the widest Nissan manufactured these rims ? I have a set but they are only 8.5" wide all around. idearly id like 10" all round.. Do they manufacture these rims in 10" all round ?

im looking for a product that doesn't contain silicon, to help moisturise the dash in my r32.. ive found this product on ebay called Meguiars Supreme SHiny HI GLOSS UV protectant.. cant seem to work out if this product contains silicon or not or can anyone recommend what products to use on my dash to effectively add moisture into the dash to prevent it from cracking

what products are recommended to help rejuvenate the dash on my r32 ? ive read any cleaning products with silicone in them are bad and will dry the dash out and will speed up the process of the dash cracking.. im looking for some kind of product to rub the dash down in to stop it from cracking, effectively add moisture into it.. any helps appreciated cheers

ill offer 5k for the car, if your interested in selling for 5k call me on 0405 057 652 cheers

Im sure a fair few people here should know the M's K&N air pod adaptors for the GTR'S, R32 TO R43. made by (M's) they have K&N filters. Does anyone happen to know the code for that specific K&N filter that connects to the adaptors ? I did find it on the net somewhere ages ago, wrote it down and obviously have lost it.. and have spent hours looking for it again with no luck Need to know the specific part code to order a set of them from local auto joint. They are clueless without the part code thanks

g'day now ive been trying to get nissan FAST working for a while now, but cant get the bloody thing working. all i need is 3 part codes for a r32 GTR, for the boot bounce stop rubbers, and the bonnet bounce stop rubbers, and intercooler pipe rubber washers. --the bonnet stop rubbers mount to the radiator support, at the far left/right sides. (assume they come in a set?) --the boot stop rubbers mount to the boot itself, left/right hands sides. (assume they come in set)? --these rubbers are used on the stock r32 gtr intercooler piping whereever there is a bolt mount, its basically a rubber washer if anyone with a working version of FAST could please get me them codes it'd be muchly appreciated. I'm sick of looking at my pride and joy and seeing a cockeyed bonnet and boot. 1 bonnet rubber is missing and 1 boot rubber is squashed badly. cheers

when i type in the VIN number (any legit rb vin number) it says "model series can not be found for this vin no input model or model series" iruvyourskyrine - we appear to be using the same nissan fast NFA010 - but it seems that u have 2 fields that u put your VIN NUMBER into, firstly "BNR32" and the second field "306428" WHEREAS on my nissan fast i only have 1 field that i enter the whole vin number into. How do i assign the japanese CD's ??

if someone did do a gtst/gtr conversion, the chassis number is for a GTR - im almost tempted to rub back the paint on/around the chassis number, to see if anyone has cut/welded in the area around the chassis number

gotRICE? - deffintly not a gtst/gtr conversion as behind the right hand headlight where the other intercooler hoses pop thru the chassis is genuine to fit a GTR, not just a dodgy hole cut - IS THERE ANY OTHER WAYS TO TELL IF THE CHASSIS IS FROM A GTST ? i got no idea why someone has made such a mess with it, all i can assume is perhaps that spot rusted out and/or was replaced poorly with a dodgy cut out peice from another car.. ??

looking at the 2nd and 3rd pictures, if you look at the top left hand corner of the picture, there is another hole cut, 1" wide 2" long. IS THIS HOLE SUPPOSED TO BE THERE ??

hey folks so today i took all the intercooler, pipeing, hosing and bov's off the car, to reveal that the hole cut under the battery for the intercooler pipeing has been poorly done. I have been told that on R32 gtr's this hole come stock standard, therfor you cannot be defected for it ?? As the pics show, someone has cut the area out, made the hole slightly bigger/bodgier n then only tac welded the peice back in place, and just slapped paint over it, it probably had 10 MIG tac welds holding it in place. The car was complied after import and has been roadworthy'd twice once in NSW and once in VIC and this was never noticed. I have owned the car since it was imported. The pics were taken before i took a thick 1mm chunk of paint off the whole lot, looks like they just got a paintbrush and slapped paint over the bodgy job. After the paint was all scraped back to the original white paint, you could easily see only maximum of 10 or so tac welds holding the plate in place. I plan to fix this up, weld the peice back in properly and grind it all back down. By trade im a sheet metal fabricator so fixing this up is easily done. In the engine bay i was thinking of getting some either 1.6mm or 2mm plate and covering the area around the hole where its allready cut and recutting a new hole in the 2mm sheet, that way it looks neat and is strengthened. Can anyone tell me if i can be defected for this ? obviously after i start welding im guna need an engineers cert to show its strong and been done properly. But thats only 100% necessary to get the engineers cert if the cops make me do so, correct ? Because ill do a bloody good job and itll be very neat. Hardly noticeable maybe only noticable to a GTR enthusiest.. Whats your opinions about this ? keen to hear others thoughts and opinions on this cheers THIS LAST PIC IS LOOKING FROM IN THE WHEEL WELL.

g'day folks, i finally got nissan FAST up and running, but when i open the 'FAST System' - When the actual program is open and i just search for a model of car, (by clicking on the CD icon) it shows 42models of nissans but no skylines, the models of cars is shows are, pulsars, 300zx, 240sx, 280sx, sentra, stanza, ultima, maxima, and some other crappy models of pickup type vehicles. Have i buggered up the setup process of nissan fast ? i need to source out heaps of door seals n shit for my r32 gtr, and a heap of other seals nuts/bolts and misc peices.. hence why i need nissan fast up and running. any advice is appreciated, cheers

hey yep that clears that up - is anyone here good with nissan fast ? ive just downloaded and setup fast, and got it running all good... but when i go to select a model of car (there is a CD button to select and it brings up a heap of models of cars), there isnt any skylines, Firstly it seems i must add a 'Model series' in nissan fast else all the buttons are just blank, once i enter a model series then all the buttons appear. There is only 42 different models to choose from, no skyline series at all ive muddled up somewhere in the in installation process i think any help appreciated cheers

im on the RHDJAPAN website, for their parts for sale they show the schematic from NISSAN FAST - it shows all the other part code's but that joint needs the SKU number of the drawing and the SKU part number in order for them to find the correct part for me.. for example, heres a pic from nissan fast of a skematic http://www.rhdjapan.com/media/catalog/product/cache/1/image/5e06319eda06f020e43594a9c230972d/8/4/84902-04u10.jpg on here, which part displays the SKU number of the schematic ? As ive got a heap of part code's written down but they need the SKU number from the schematic aswell.. cheers

G'DAY - r32 gtr im not too sure how to describe this, but im after the 2 side peices (left and right hand side) of fabric that cover the rear towers in the boot thats the tower strut connects to. I have the peice that covers the rear tail lights and i have the floor carpet/lining - i am just missing the 2 side covers that cover the tower struts The boot has 4 covers (linings) what ever u wanna call them, the floor lining which has 'skyline' written on it, the 2 side linings that cover the rear tower and the last lining which covers the tail lights., (fabric is grey) I NEED THE 2 LININGS THAT COVER EACH REAR TOWER cheers if anyone can help out it'd be much appreciated let me know a price $$ Cheers

damn

G'day, now ive just been looking into importing a r32 gtr into victoria, but some of the price's of the r32's i am finding on import monster are just rediculous, 2,380,000YEN which is like $25k for a r32 gtr to buy from japan.. that was the maximum price, others got down to 800,000YEN. Can anyone who has imported a r32 GTR into australia give me a rough price on what it cost in total after compliance and registering the car. Im interested in importing a GTR aslong as it works out cheap enough.. can find a registered GTR in vic for $15k these days so i cant really imagine how much cheaper it'd be to import one.. anyone who has imported one that can give me a figure of what the whole process cost would be appreciated cheers

hey folks im looking to buy a brand new r32 gtr dash (preferably one without a lump) i purchased one over ebay that was in good condition with no lump, but after fitting it and fitting the air con vents into place i can tell the dash has been out in the sun for a while and the edges/seems are starting to kind of lift up, very hard to explain.. does anyone know where i can buy a BRAND NEW dash for a r32 skyline ? looking to buy one asap cheers

it may be illegal to remove the ABS unit although it was never picked up on 2 Roadworthy certificates or when it was complied when it was imported... Ill look into getting a brand new ABS unit soon - but im going to need all the metal hosing that goes with it

hey mate, it'd be very helpful if you could find out exactly what they used to run the cables to the boot, wether they just extended the current red/black cables all the way to the boot or if they done somthing different, and what sort of cable they used. cheers

yes its a 1994 model - written on the build plate, reg papers.. even nissan fast says its a 1994 model when punching in the VIN So there would really be no other reason to the removal of the ABS unit unless it fails and the owner cannot be bothered replacing the unit.. ? is there much work in reinstalling the ABS unit ?

hey folks just been looking at pics on the net of r32 gtr engine bays and first thing i noticed was that my GTR is missing the ABS unit although the brakes still work. Ive only recently picked this GTR up and had it registered, but still needs some work untill im happy with it. Is there a reason the ABS unit may of been taken off ? for drifting or somthing ? Or has more then likely the unit just failed so they just ripped the whole ABS unit off ? its a 1994 r32 gtr. I did originally wonder why there was only 2 metal brake lines running accross the firewall but didnt take no other notice of it.. now ive relised why theres only 2 there... the car is only going to be driven on the weekends so idearly i want an ABS unit put back on there, unless they are prone to failing quickly ? any advice is appreciated cheers

g'day ive just had a quick look on ebay for a dry cell battery as i plan to relocate my battery to my boot - Can anyone give me any recomendations as to which dry cell battery to use on a r32 gtr.. seems theres a shitload of different drycell batterys on the market so anyone with any advice would be appreciated, i am looking at this one currently http://www.ebay.com.au/itm/320533528332 its a OPTIMA REDTOP DRY CELL - they also have yellow top and blue top but im not sure exactly which one would suit me.. all advice appreciated cheers

g'day ive searched round the net and found many people asking the same question but little info about it. Has anyone here relocated the battery of an r32 skyline into the boot ? I want to move it there so i can make a big custom alloy oil catch tank and water tank. I am just wondering what kind of cables should i use to extend the current cables to the boot ? Is it as simple as that - just extending the red/black cables currently in the car to the boot ? i can make a battery box to hold the battery in the boot nice and secure. Im assuming the cables should be run under the car... very interested to do it asap cheers