Blk33

Go to the Whiteline WEB site and order them directly. They ship to Japan. The small suspension components would be cost effective freigth wise, maybe the sway bars would be expensive to freight. Cheers Rob

Check the Whiteline site http://www.whiteline.com.au/ Key in ONLINE PARTS CATALOGUE top right hand corner - nissan skyline r33 gtr This will show all the parts available Front Camber - KCA 348 will take out 1 deg Rear Camber - KCA 347 get 2 kits and use one at each end of the arm - this will take out 1.5 deg on the rear I have used the rear kits and they work well. Cheers

Hi, I'm no expert but it looks like you have about 5mm of TOE OUT at the front. I would bet if this is the case your car will be picking up all the camber changes on the road and steering into them. Get the front toe changed to toe in by a mm or so. Cheers Rob

Hi Landy, After a bit of head scratching I realised the answer to your question is in the article! Modifications to Wolf ECU board The notes supplied with the Wolf ECU showed the temperature sensor mapped into a spare pin on the wiring loom. I chose not to do this but to cut tracks on the WOLF ECU and hard wire the temperature sensor via a plug and socket directly into the new ECU. I did this so I could plug the standard ECU back into the wiring loom at any time. The picture shows 2 wires for the air temperature terminating inside the ecu. Hope this helps. Cheers Rob

Cheers, I will try the number later today. Rob

Subject: Delivery of R33 GTR Suspension Kit for BLK33 Hi Matt, I would like a response to this query regarding the progress of my order for a R33 GTR suspension kit. I transferred the money late in June - some 2 months ago. You advised me delivery would be 2 weeks and since that date I’ve had no replies to any of my PMs. As mentioned in my previous PMs, I'm not busting for the bits I just want to make sure you received the money and what the expected delivery date is. Please contact me by PM or mobile. Cheers Rob 0402 742 162

Subject: Delivery of R33 GTR Suspension Kit for BLK33 Hi Matt, I would like a response to this query regarding the progress of my order for a R33 GTR suspension kit. I transferred the money late in June - some 2 months ago. You advised me delivery would be 2 weeks and since that date I’ve had no replies to any of my PMs. As mentioned in my previous PMs, I'm not busting for the bits I just want to make sure you received the money and what the expected delivery date is. Please contact me by PM or mobile. Cheers Rob 0402 742 162

Subject: Delivery of R33 GTR Suspension Kit for BLK33 Hi Matt, I would like a response to this query regarding the progress of my order for a R33 GTR suspension kit. I transferred the money late in June - some 2 months ago. You advised me delivery would be 2 weeks and since that date I’ve had no replies to any of my PMs. As mentioned in my previous PMs, I'm not busting for the bits I just want to make sure you received the money and what the expected delivery date is. Please contact me by PM or mobile. Cheers Rob 0402 742 162

Subject: Delivery of R33 GTR Suspension Kit for BLK33 Hi Matt, I would like a response to this query regarding the progress of my order for a R33 GTR suspension kit. I transferred the money late in June - some 2 months ago. You advised me delivery would be 2 weeks and since that date I’ve had no replies to any of my PMs. As mentioned in my previous PMs, I'm not busting for the bits I just want to make sure you received the money and what the expected delivery date is. Please contact me bY PM or mobile. Cheers Rob 0402 742 162

Suggest you contact the manufacturer - they may be able to assist. http://www.wolfems.com.au/ If you check the WEB site, click on downloads, and then select manuals, you may be able to determine the pinouts required. Sounds like a big job. Good luck. Rob

Hi, What is your question? I may be able to hep if it is to do with the Wolf ECU. Cheers Rob

Hi Jeremy, Sounds like you have had a good run from the car! Good luck with the sale. Cheers Rob

Hi, I am after a SNORKEL for a standard R33 GTR AIRBOX. Can anyone help? Cheers Rob

Any chance to post your pictures?

It would be a messy job to bypass the standard water/oil cooler, I would suggest you just fit the oil cooler adapter plate between the oil filter and the standard water/oil cooler. Cheers Rob

G'day ahh 33 s2, My Skyline had a Blitz front mounted cooler attached. The pipes went through the standard holes in the left wheel arch so there was no issue with the right hand side. I guess if your cooler pipe goes through the right wheel arch then you may have to mount the oil cooler in a different place. Maybe someone else out there can help with suggestions??? Cheers

Thankyou for all the enquiries. I have sold them to a local in Melbourne. Rob For Sale One set of DBA Rotors suit R33 Gtst. These are left and right slotted. Part number DBA 4963 SL (Left and Right) I sold my GTST before they were fitted. Brand new still in boxes with plastic cover. Going CHEAP $300 for the pair.

As Syphon says "yes" is the answer. Additional oil is required to fill the pipes and the oil cooler. I have estimated an additional 1/2 litre for this purpose. Cheers

Check out http://www.skylinesaustralia.com/forums/in...showtopic=79130 They may be the same kit. Cheers Rob

Updated words!

You know what they say! "Once you try black, you never go back" They look great just after they are washed ........... Cheers

Thanks for the words. I have added photos of the front and rear seats as requested in a PM. Cheers

Updated photos

SOLD For Sale - Skyline 1996 R33 GTS-T Series 2 Black Turbo Manual (Melbourne) Hi All, Regrettably the time has finally come for me to sell my beloved project. I’m planning to upgrading to a GTR in the near future and I need the cash. I’m her first Aussie owner; she was delivered in August 2002 with only 56k on the clock in stock standard condition. I average about 5000km per year in the car, the car is garaged when not driven, and very rarely sees any wet weather. I have built the car as a SLEEPER and have done all the work myself. Open the bonnet, listen to the engine, walk around the car – it won’t attract any undue attention from the Police. It has a high flowed GCG turbo and a fully sorted out Wolf 3D engine management fitted. Currently the engine turns 220KW at the rear wheels with only 11 PSI boost. It is fitted with a 3 inch mandrel exhaust from the turbo, a high flow Cat and has a QUIET muffler. (Can supply louder muffler) The combo has the potential for 250KW but requires larger injectors. The car rides like a dream and is fitted with SAU group buy suspension comprising of Bilstein Shocks, Whiteline Springs and Nolathane suspension bushes. Specifications Car - Nissan Skyline 1996 R33 GTS- T Series II Speedo - 76kms Location - Melbourne - Blackburn Transmission - 5 Speed Manual Engine - RB25DET Wheels/Tyres - 17'' Gold Advan, 8 '' front 9'' rears with Bridgestone SO3 235/255 Exhaust - 3'' turbo back – Very quiet Turbo - GCG 450HP Engine Management – Fully sorted Wolf 3D see - http://www.skylinesaustralia.com/forums/in...showtopic=82100 Suspension – SAU group buy - R33 GTST Whiteline & Bilstein Suspension with SK's settings see - http://www.skylinesaustralia.com/forums/in...showtopic=85467 Oil Cooler see - http://www.skylinesaustralia.com/forums/in...showtopic=79130 Blitz FMIC fitted CD Player - Sony Immobiliser Excellent condition $20500 Mobile 0412 170 180