rb2534

No receipt from Nissan direct but I can show you copy of the bank transfer and it was bought off a reputable forum memeber on here who is also a SAU Vic Member. I will gladly supply the user name of the person I bought this off to back up that is in infact genuine. I paid $295 exactly for it on the 5/7/2012, the $5 ontop was is a marginal cost for postage, I don't have the original box for it (but it will be boxed for shipping) because if you search my user name I am clearing out a heap of other parts from my shed and this box along with other parts boxes from items I bought brand new got ditched while I had the chance. I was intent on using it but my stock AFM will achieve the power I am aiming to make of 220-230rwkw. Also since I have bought more items like oil cooler and all new suspension arms which wasn't in my orignal budget I am trying to recoup some funds.

Pm sent

You in Adelaide? I have HKS Hyper D's in my 34 street car which I may be selling, I am getting a full wheel allign and set up done thursday and possibly looking at going slightly softer spring rates as with my fixed back seat shes abit rough lol PM me in a few days and i'll see how I go with it

And not to mention thats overnight express freight through Australia Post insured and all

Firestones now $150 the pair Silvia rims $50 the pair Monza seat $30 The rest of the tyres and rims give away tin order to just clear out some room

Exhaust now $150 or $200 with a decat pipe, really want this gone to clear some room

Pm replied to still for sale

Still got these make an offer or prices ONO

Cooler on hold at the moment, rest still available so make an offer

I also have a K&N pod filter with this for $50 more, used for about 500ks have upgraded to Apexi Power Intake. It also has an adaptor to suit this AFM, the lot for $350

The plug that connects into the Z32 AFM is different, all you do it either chop your exising plug off and wire it in with the plug and terminals provided in this package, or piggy back your wiring so you can keep both plugs incase you ever want to revert back to the existing AFM. It's as simple as following this guide below: http://www.skylinesaustralia.com/forums/topic/116520-how-to-fit-a-z32-afm/

3'' SS Decat pipe, came off a 33 skyline and not using it on my 34 $50 freighed anywhere in Aus

Bought this brand new genuine Nissan Z32 for my 34 from another forum member but will no longer need it, have it for a few months while I've been slowly modding my car. It has only had an Apexi pod bolted to it for a trial fit for clearance and thats it. The plug is a Bosch plug with connectors and the rubber boot to suit, the bag has only been opened to check the pin outs as I was trying to work out how to wire it in for my car. Price is $300 delivered anywhere in Aus

Did this to my 34, very easy to follow and materials were around $65 from Jaycar in Adelaide, I did 2 mistakes which I will describe below and this might help anyone doing this mod, Also I fitted a Walbro intank pump whihch required the existing filter sock to be used: Firstly I cut the original wiring between the Fuel tank Lid and original pump wiring. I had a brain fart and realised after cutting that the Nissan loom plugs straight into the Walbro, I like to try and eliminate connectors/joins but when I saw the spade connectors on the Walbro harness I thought I had to cut and join that to the Nissan loom. I also opted to use the red type crimp joiner rather than the spade connectors supplied in the Walbro loom. Secondly I mounted the relay to one of the screws that holds the fuel lid cover on, reason been was because I cut the loom a little bit too short and didn't have the room to stretch it any more but I would have prefered to mount this else where as the boot carpet linings sit ontop of the wiring and relay. I might opt to move this or somehow cover the relay and wiring. I'm abit padantic and even though the car has wiring all over the loom having a relay hard wired to 12V covered by insulation and carpet isn't something I like to do. Once again great write up

Do these require spacers or do they fit under a standard intake manifold?? Do the standard electrical connectors fit or do they require different connectors??

Location??

If the gear knob doesn't sell I'll take it

3'' mid pipe (Needs to go from HKS snail dump to cat) and 3'' high flow cat to suit R34 4 door I have a 3'' SS Decat pipe to trade if wanted and also a 34 2 door cat back system with no mufflers and cannon PM please

Have a manual cross member is needed, rubber was perfect came with my gearbox that had approx. 100,000ks on it. I ended up scoring a nismo one instead. $50 freighted

Been offered a Blitz FMIC so selling the cooling pro FMIC off my 34, only fitted this last week, bought it 2nd hand originally, comes with all the pipe and joiners that I got it with - $200 3inch SS exhauust for 34 2 door, bought it to mod for my 4 door but found a 4 door system ready to go - $200 K&N air pod with adaptor to suit R34 AFM, selling as i'm fitting an Apexi power intake and Z32, barely done 200ks - $50 with adaptor Will sell the lot for $400 as a package if wanted PM, parts in Adelaide and will deliver

Possibly chasing the fuel tank lid and the 2 wire wiring loom between the fuel pump and fuel tank lid and about 200 mm of wiring prior to the fuel tank lid.

Clearing out my shed and want get rid of these, bought these for my old track car but now got my 34 and I'm running bigger tyres and different PCD wheels now so these arent any good for me 2x S13 Silvia rims with Pirelli P6000s which were used for a few thrash laps on a track but could be used on road has some tread left- $100 2 x Firestone F690's 255 40 17's with around 80% tread no where near the wear bars - $250 the pair 2 x Yokohama Drive 255 45 17s, about 40% tread - $50 the pair 2x retread 195 5015s - $30 the pair Some old rims which i only have 3 of, cant remember if they are 15s or 16s but I also have some odd tyres which I wont use, take them away for free as I won't use them. 4 x 114.3 so will fit Silvia/180 etc Monza recliner seat - $50 ono

Any part numbers on them??

R33 Rb25? I thought 33s were side feed??

What are these to suit? Chasing some for NEO engine