wardiz

I'm in the same position ! I fitted a Black Nismo gauge cluster (320km/h) and I'd like to adjust the odometer to the same mileage than my old gauge cluster. Picture of it : Is there a way to do that ?

on the R33 GTR, your o2 sensors should have 3 wires. The one with 2 wires has been changed obviously to another type of sensor. Front and rear are the same but with different connectors thus the different part numbers. This link should help you : http://wardiz.over-blog.com/article-34295259.html

Hi guys, quick report to let you know that the last week end I replaced one of the genuine o2 sensor (the dead one) with the universal bosch sensor (ref 0 258 005 726). Fitted perfectly. And it's easy to connect with the universal connector (provided with the universal sensor). I went to a mecanic to control and to check car emissions and they are perfect !! Conclusion : o2 sensor bosch ref 0 258 005 726 can be used as a replacement part for O2 sensor for R33 GTR and R34 GTR. Hope this help.

There are 2 O2 sensors on RB26DETT engine. But I don't know is the same applies to RB25DETT engines. I wuold say no but I could be wrong.

I know there is a way to check if your O2 sensors are faulty without anything but I can't remember it. Or you can get a cable and software from here : blazt software for Nissan Plug in your laptop on your car with the cable and watch the O2 sensors. I will see quickly if it's stuffed or not. That's how I discovered one of mine was dead.

I have exactly the same problem : one of the 2 sensors read 0.2V while the other one fluctuates between 0.3 and 0.8V The one at 0.2V is stuffed ... I will replace it in 2 weeks with a new one and I will post the results here.

I found this : installation instructions of universal sensors can be useful

Hi, What a post ! I read all the 18 pages and it took me a couple a hours but that was very interesting. I have to replace my O2 sensors on r34 gtr. Replacing O2 sensors on R33 and R34 gtr hasn't been discussed a lot however. My sensors are Bosch (ref starts with A24-A21 140 ...) . I spent several hours on bosch sites and I finally managed to find a matching sensor. The ref is 0 258 005 726. It comes with a kind of universal plug as well. This is a universal O2 sensor and is suitable to replace parts 22690-24U00, 22690-24U01, 22690-24U02, 22690-24U03 according to this document : bosch catalogue It's clear that R32 GTR and R33/34 GTR don't have compatible O2 sensor and the universal sensor quoted above is not suitable for the R32 GTR according to Bosch catalogue. has anyone here tried this universal sensor ?

Hi Wisey18, Do you have to disassemble to rear lights to fit LED inside ? I own a R34 and I basically need to swap the fog light and the reverse light (this is required by the registration process) : fog light must be on left. My idea is to disassemble the left rear light and to paint the interior side of the glass with red. Next thing is to deal with the wires - easy part - and I will done. But I have no idea how to disassemble the rear light without breaking anything. Any idea ??

you have pm.

thanks for you quick response mate, much appreciated ! My UK importer just informed me that chassis number is BNR34-000297 Do you mind to check this one ?

Hi all, That's my first post here . I will very soon get a R34 GTR and I'd like to check the model my chassis number is : BNR34 000277 Can you tell me if Nissan FAST software provide the following data : Max laden weight ? Max rolling weight ? Max load (front axle) ? Max load (rear axle) ? I've never seen anyone being able to provide these data. I have the owner manual and the workshop manual but they do not help. Alexis ps: I'm from France by the way

Sorry for the mistake, moved to http://www.skylinesaustralia.com/forums/VI...;gopid=4386560#